深部调剖驱油交联剂的研究

为提高非均质性严重的地层原油采出率 ,合成了用于聚合物驱油的 4种交联剂 ,并对聚合物种类、用量和其与交联剂组成的体系进行了评价。 4 0℃下铝交联剂凝胶粘度低 ,酚醛树脂交联剂低温下不成胶 ,而有机铬交联剂 (J2 )和有机复合胺 (J3)交联效果好。当选用HPAM/有机铬交联剂 /有机酸交联体系时 ,其中HPAM相对分子质量为 2 1× 10 7,可通过改变体系pH值调节成胶速度 ,pH值 6 5时 ,14 0 0mg/LHPAM和 4 0 0mg/LJ2组成的体系在 4 0℃、30d可形成粘度为12 0mPa·s以上的凝胶 ,且热稳定性好 ,成胶时间能满足现场施工需要。 14 0 0mg/LHPAM和10 0 0mg/LJ3交联剂组成的体系 ,成胶时间长 ,有利于油田深部调剖驱油     

Peanut and Walnut Rancidity: Effects of Oxygen Concentration and Relative Humidity

Accelerated tests for oxidative rancidity of blanched peanuts, blanched dry-roasted peanuts, blanched oil-roasted peanuts and shelled Persian walnuts were performed at high and low oxygen content at controlled intermediate and low relative humidities. The results confirmed and quantified the importance of oxygen content, relative humidity and roasting process in the oxidative rancidity of peanuts and walnuts. There is a potential to extend shelf-life of roasted peanuts and walnuts by edible coatings with low oxygen permeability or nitrogen-flushing with oxygen barrier packaging. Static headspace chromatography was useful to monitor oxidative rancidity in walnuts and roasted peanuts.     

Hydrolytic stability and protective properties of polyurethane oligomers based on polyester/ether/polyols

The present study deals with effect of the type and chemical character of incorporated polyester/polyether blocks on the hydrolytic stability of crosslinked polyurethane oligomers. Diffusion parameters of the investigated polyurethane oligomers, giving information concerning chemical changes taking place in neutral, basic and acidic aqueous environments, have also been determined.     

MALTING AND BREWING SCIENCE: CHALLENGES AND OPPORTUNITIES*,†

Molecular technologies have been developed for the transformation of barley. These technologies complement current methods of barley breeding. In addition, they offer the potential of altering specific components in barley that affect malting quality and of introducing foreign genes, controlling desirable traits, into barley. Application of genetic engineering to improving malt quality factors such as cell wall degradation, protein modification, starch hydrolysis and flavour stability, is discussed. Limitations to the use of this technology for improving malt-related functional properties of barley components such as cell walls and starch granules are also evaluated. Some possible constraints to the utilization of genetic engineering for malt quality improvements are identified.     

天津爱普生有限公司油墨废水处理方案及运行情况

天津爱普生有限公司废水治理工程设计水量5t／d，废水浓度高，水质、水量变化大。采用水解酸化-生物接触氧化处理工艺对天津爱普生有限公司废水进行处理，进水CODCr，平均为2500mg／L左右，CODCr去除率≥90％，排水各项指标均符合国家污水综合排放标准GB8978-1996的二级排放要求。     

Adhesion and Hydrolytic Stability of the Interface Between High-Modulus Polyethylene Fibers and Acrylic Resins

The effects of oxyen plasma treatment on the surface chemistry of Spectra 1000® high modulus polyethylene fibers and on the mechanical properties of fiber-reinforced composites of the fibers in a Bis-GMA based acrylic resin have been studied. X-ray photoelectron spectroscopy and diffuse reflectance FTIR spectroscopy have been used to show that the majority of oxygen on the fiber surface exists mostly in the form of ether and/or epoxy linkages, with carbonyl-, carboxylic- and ester-containing compounds accounting for less than 10 percent of the total. While the untreated and plasma-treated fibers have similar chemical compositions, the surfaces of the plasma-treated fibers are more polar and the oxygen is chemically bonded instead of being merely physisorbed. The interfacial shear strength between the fibers and the acrylic resin is increased by a factor of 2.3 by the plasma treatment indicating the presence of a weak boundary layer on the surface of the untreated fibers. The hydrolytic stability of the composite interfaces was investigated for fibers sized with several Bis-GMA-based adhesives. Maximum stability was attained by sizing with Bis-GMA containing a peroxide catalyst or an amine accelerator. The flexural properties of composites utilizing plasma-treated and untreated fibers were compared in three-point bending. The ultimate bending loads for composites using treated fibers were much higher than those for composites with untreated fibers, but only a fraction of that for glass or Kevlar®-reinforced materials.     

Rancidity development during the chilled storage of farmed Coho salmon (Oncorhynchus kisutch)

Coho salmon (Oncorhynchus kisutch) is a fatty fish species whose farming production has greatly increased in recent years. Lipid damage produced during Coho salmon chilled storage was studied for up to 24 d. Lipid hydrolysis (free fatty acids, FFA) and oxidation (conjugated dienes; peroxide value, PV; thiobarbituric acid index, TBA‐i; fluorescent compounds formation, FR; browning development) were determined and compared to lipid composition (polyene index, PI; astaxanthin, AX) changes and sensory assessment (rancid odour development) results. Most lipid damage indices developed slowly during storage; thus, values obtained for FFA, PV, TBA‐i and FR were in all cases under 1.5 g/100 g, 4.0 meq oxygen/kg lipid, 0.40 mg malondialdehyde/kg muscle and 0.40, respectively. Odour assessment showed a significant (p <0.05) rancidity development at day 10, when compared to starting fish material; then, non‐acceptable values were obtained at days 19 and 24. The PI analysis showed not many differences during the storage time, with the lowest mean value at day 19. AX analysis indicated a relatively high content in the white muscle, which was maintained till the end of the experiment. A low oxidation development is concluded for Coho salmon lipids when compared to other fatty fish species under the same chilling conditions. AX was found to contribute to the oxidation stability of Coho salmon lipids, due to its free radical scavenger properties.     

易水解聚酯的热性能

用PTA法合成了一系列易水解聚酯(EHDPET)。采用DSC和TGA技术系统分析了SIPE、IPA、脂肪族化合物(A)等各组分含量对其热性能的影响。结果表明:tg、tcc(冷结晶温度)随SIPE含量的增加而升高,tm、tmc(热结晶温度)则下降;IPA的加入使tg、tm、tmc均下降,而tcc升高;随脂肪族化合物(A)含量的增加,tcc、tg下降。随SIPE、脂肪族化合物(A)含量的增加,EHDPET的热稳定性变差。     

环氧乙烯基酯树脂 (Ⅱ)环氧乙烯基酯树脂在酸、碱、盐溶液中的稳定性

较为详细论述了影响环氧乙烯基酯树脂在酸、碱、盐溶液中稳定性的各种结构因素。     

Treatment of methanol wastewater with two-stage and two-phase anaerobic process

The two-stage and two-phase anaerobic process (TSTP) composed of hydrolytic acidification reactor,first-order and second-order external circulation anaerobic reactors (EC) was taken to treat methanol wastewater. Test results show that TSTP process is quick start-up in 51 d, and the maximum VFA of hydrolytic acidification reactor effluent reaches 876 mg/L. Under the condition of volume loading of 6.56 kgCOD/m3·d, COD removal rate of the first-order EC reactor is about 85%, and under the condition of volume loading of 1.02 kgCOD/m3·d, COD removal rate of the second-order EC reactor is about 50%. When the inflow COD of TSTP process is between 7000-11000 mg/L, its effluent COD is lower than 600 mg/L. In the biological conversion process of methanol into methane,the production of acetic acids as an intermediate product can be ignored and the direct production of methane from methanol is predominant.