DETERMINATION OF TOTAL NITROGEN IN BARLEY AND MALT BY COMBUSTION METHOD—COLLABORATIVE TRIAL

A combustion method, relying on the Dumas principle, for the determination of total nitrogen in barley and malt, has been collaboratively tested by the Analysis Committee of the European Brewery Convention. Repeatability, r₉₅, and reproducibility, R₉₅, values were 0.063 and 0.116% of dry matter, respectively, for samples with nitrogen contents in the range 1.23 to 1.86% N of dry matter. There was no significant difference between these values for barley and malt. The Analysis Committee approved the adoption of the combustion method for inclusion in Analytica EBC as an alternative method.     

THE 1990 LAURENCE BISHOP SILVER MEDAL LECTURE* THE DESIDERATUM FOR FLAVOUR CONTROL

Flavour is arguably the most important aspect of the quality of foods and beverages. Beer, however, is an extremely complex mixture of volatile and non-volatile components, and the measurement and control of beer flavour is one of the greatest challenges in brewing research. Recent progress towards understanding the contributions of raw materials and processing conditions to the aroma and taste of beer is reviewed.     

THE LAURENCE BISHOP SILVER MEDAL INAUGURAL LECTURE THE IMPACT OF SCIENTIFIC MEASUREMENT ON THE BREWING PROCESS

Laurence Bishop's contribution to the brewing industry over more than 50 years of research endeavour and committee activities is reviewed. Three research areas — prediction of extract, the effect of turbidity on yeast activity during fermentation and the development of a 3-vessel fermentation system — are used to highlight his achievements. Five topics with which the author was intimately involved, three of which were connected with Laurence Bishop's own researches, are used to describe the author's activities. These concerned the assessment of beer foam, the prediction of beer stability, the assessment of the bittering value of hops, time course changes in the analytical characteristic of an ale fermentation and the use of fractional factorial designs to facilitate experimental programmes.     

Mashing of rice with barley malt under non-conventional process conditions for use in food processes

Non-conventional mashing conditions are relevant in the development of a lactic acid-fermented soymilk beverage where mashed rice is the source of carbohydrates for the fermentation and sweetness of the beverage. Advantages in the process layout could be achieved by mashing at higher pH and lower malt concentrations than normally used in the brewing industry. the work reported here assessed the consequences of mashing under non-conventional conditions. Malt concentration in the cereal part was varied from 25% to 70% (w/w), pH was varied within 5.3 to 7.1, and prolongation of the holding times at 50°C and 62°C was investigated. Regression equations have been established for predicting yields of soluble protein, low molecular weight sugars and total fermentability as functions of pH and malt concentration. the results showed that the maltose yield was constant while glucose, maltotriose and total fermentable sugar yields decreased slightly with increasing pH and decreasing malt concentration. Prolonged mash holding times at 50°C and 62°C gave minor increases in protein yields only. It is concluded that it is quite acceptable to use non-conventional mashing conditions when a mashing step is integrated in other food processes.     

APPLICATION OF A COMMERCIAL ENZYME PREPARATION IN THE BARLEY MALTING PROCESS

This paper presents data on barley micromalting with addition of the CELLUCLAST enzyme complex. This is a commercial, multicarbohydrase with distinct β-glucanase and proteinase activities. The enzyme was added to steeping and germination phases, in different quantities (0.05%; 0.75% and 0.1% of initial barley). The enzyme was added to different malting phases: to the 2nd and 3rd steep water, at the beginning of germination on the 1st day by spraying, on the 2nd day of germination and in combination of addition to 3rd steeping water and in germination start (50% of total quantity of each). CELLUCLAST enzyme had a significant effect on reduction of wort viscosity, extract difference, wort filterability and protein breakdown, depending on the quantity of added enzyme and the malting phase to which it was added. There was no negative effect on other malt quality parameters. The best values of cytolytic breakdown parameters (viscosity, extract difference, filtration rate) were obtained with addition of 0.075% of CELLUCLAST, on the first day of germination.     

MALTING AND BREWING SCIENCE: CHALLENGES AND OPPORTUNITIES*,†

Molecular technologies have been developed for the transformation of barley. These technologies complement current methods of barley breeding. In addition, they offer the potential of altering specific components in barley that affect malting quality and of introducing foreign genes, controlling desirable traits, into barley. Application of genetic engineering to improving malt quality factors such as cell wall degradation, protein modification, starch hydrolysis and flavour stability, is discussed. Limitations to the use of this technology for improving malt-related functional properties of barley components such as cell walls and starch granules are also evaluated. Some possible constraints to the utilization of genetic engineering for malt quality improvements are identified.     

EVALUATION OF BARLEY AND MALT QUALITY USING NEAR-INFRARED REFLECTANCE TECHNIQUES

A scanning near-infrared reflectance spectrophotometer was calibrated for the prediction of barley aleurone colour and malt moisture. The malt moisture was predicted on malt ground for the determination of malt extract (coarse grind) making the method suitable for moisture correction in malt extract estimation. Calibrations for the prediction of malt extract and endosperm modification from barley and malt were also attempted. A correlation (r= 0.851 n = 135) was found between malt hot water extract and the percentage of the endosperm estimated as being modified by microscopy following staining with Calcofluor. Probably because of this influence of modification on malt extract, the use of near-infrared reflectance to predict malt extract was most successful at predicting the malt extract values obtained following micro-malting in the absence of the additives, gibberellic acid and potassium bromate.     

营养型发酵软饮料的研究

研究利用稻加工大米的副产品碎米为主要原料 ,加入麦芽、加酶 ,进行液化、糖化、发酵等工艺 ,研制出一种发酵营养型软饮料。本产品与啤酒相比 ,可减少原料总用量的 17% ,减少麦芽用量的 2 8.6%。     

11°BX全麦芽啤酒的工艺研究

介绍了一种全麦芽啤酒生产的新工艺。通过大量的试验与探索，确定了合理的生产工艺条件，解决了全麦芽啤酒酿造时色度深、酸度高、口味粗糙等难题，从而研制出了一种具有淡爽型啤酒特征的11°BX全麦芽啤酒。     

啤麦质量的选择和评价

麦芽作为啤酒酿造的主要原料,对啤酒的生产、成本和产品质量起到比较重要的作用.本文从麦芽可能对啤酒产生的各项影响出发,论述了啤酒工厂在选择外购麦芽和制定外购麦芽质量标准时需要掌握的原则和建立外购麦芽评价体系要遵循的程序,并在此基础上,完善从大麦到啤酒的全面的质量管理工作.