Metal chlorides-promoted ammonia absorption of deep eutectic solvent

Ammonia is considered as a promising hydrogen or energy carrier. Ammonia absorption or adsorption is an important aspect for both ammonia removal, storage and separation applications. To these ends, a wide range of solid and liquid sorbents have been investigated. Among these, the deep eutectic solvent (DES) is emerging as a promising class of ammonia absorbers. Herein, we report a novel type of DES, i.e., metal-containing DESs for ammonia absorption. Specifically, the NH₃ absorption capacity is enhanced by ca. 18.1–36.9% when a small amount of metal chlorides, such as MgCl₂, MnCl₂ etc., are added into a DES composed of resorcinol (Res) and ethylene glycol (EG). To our knowledge, the MgCl₂/Res/EG (0.1:1:2) DES outperforms most of the reported DESs. The excellent NH₃ absorption performances of metal–containing DESs have been attributed to the synergy of Lewis acid–base and hydrogen bonding interactions. Additionally, good reversibility and high NH₃/CO₂ selectivity are achieved over the MgCl₂/Res/EG (0.1:1:2) DES, which enables it to be a potential NH₃ absorber for further investigations.     

Starch: a potential substrate for biohydrogen production

Hydrogen is a clean energy carrier with great potential to be an alternative fuel. Anaerobic hydrogen fermentation seems to be more favorable, since hydrogen is yielded at high rates and various organic waste and wastewater enriched with carbohydrates as substrate result in low cost for hydrogen production. Abundant biomass from various industries could be a source for biohydrogen production where combination of waste treatment and energy production would be an advantage. Carbohydrate‐rich nitrogen‐deficient solid wastes such as starch residues can be used for hydrogen production by using suitable bioprocess technologies. Alternatively, converting biomass into gaseous fuels, such as biohydrogen, is possibly the most efficient way to use these agroindustrial residues. This review summarizes the potential of starch agroindustrial residues as a substrate for biohydrogen production. Types of potential starch agroindustrial residues, recent developments and bio‐processing conditions for biohydrogen production will be discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Coal liquefaction using a hydrogenated creosote oil solvent: H-atom transfer from hydrogen donor components in the solvent

The presence of hydroaromatic, hydrogen donor components in a coal-derived solvent is one of the more important factors in the successful operation of a non-catalytic coal liquefaction process. Various hydrogen donor species present in a hydrogenated creosote oil have been identified. Their rate of disappearance under conditions that are consistent with a short residence time coal liquefaction process has been used to rank the reactivities of the various hydrogen donors. 1,2,3,10b-Tetrahydrofluoranthene was found to be an exceptional donor while 4,5-dihydropyrene, the hexahydropyrenes and 9,10-dihydrophenanthrene were found to be quite active. Sym.-octahydrophenanthrene and 2a,3,4,5-tetrahydroacenaphthene exhibited moderate activity. Tetralin and the four methyltetralin isomers were found to be unreactive under the coal liquefaction conditions employed.     

Harvesting small trees and forest residues

Eight countries collaborated and shared technical information on the harvesting of small trees and forest residues in a three year program. Proceedings and reports from workshops and reviews are summarized in a review of activities and harvesting systems of the participating countries. Four databases were developed for harvesting and transportation of these materials.     

Effects of home preparation on pesticide residues in cabbage

Experiment was carried out to evaluate the pesticides (chlorpyrifos, p,p-DDT, cypermethrin, chlorothalonil) residue levels in cabbage in the process of home preparation by washing with different concentrations of acetic acid and sodium chlorine, and tap water, preserving in refrigerator, and stir-frying for different time. Results showed that washing by tap water and/or detergent solution for cooking are necessary to decrease the concentration of pesticide residues in cabbage. Washing with acetic acid solutions (at 10% concentration for 20 min) caused 79.8%, 65.8%, 74.0% and 75.0% loss of the above pesticides, respectively. Washing with NaCl solutions (at 10% concentration for 20 min) produced 67.2%, 65.0%, 73.3% and 74.1% loss, respectively, and washing by tap water (for 20 min) were 17.6%, 17.1%, 19.1% and 15.2% loss, respectively. The reductions due to the refrigeration (for 48 h) were 3.4%, 2.6%, 3.1% and 3.6%, respectively, and those due to the stir-frying (for 5 min) were 86.6%, 67.5%, 84.7% and 84.8%, respectively. The data indicated that washing by detergent solutions and stir-frying of cabbage are the most effective home preparations for the elimination of pesticide residues.     

Interfacial tension between coexisting polymer solutions in mixed solvents and its correlation with bulk thermodynamics: phase equilibria (liquid/gas and liquid/liquid) for the system toluene/ethanol/PDMS

Vapor pressures, phase equilibria and interfacial tensions σ were measured for solutions of poly(dimethylsiloxane) (PDMS, M_w[equals]75 kg/mol and M_n[equals]50 kg/mol) in mixed solvents of toluene (TL) and ethanol (EtOH) at 30, 40, 50 and 60 °C. The experimental ternary phase diagrams can be modeled quantitatively from the determined concentration and temperature dependent binary interaction parameters χ_ij if the experimentally inaccessible composition dependence of χ_EtOH/PDMS is adjusted. The relations between σ and the equation of state of the system differ from that applying to single solvents. The exponents as well as the amplitude prefactors of the corresponding scaling laws (e.g. the dependencies of σ on the length of the tie lines or on the hump energy, i.e. on the intrusion into the two phase regime quantified in terms of Gibbs energies) change considerably with temperature. However, this variation can be reduced significantly by normalizing the independent variables. Dividing the length of the tie lines by the length for the corresponding binary subsystem proves more efficient than the distance of these tie lines from the critical point of the ternary system relative to the maximum distance of the binary subsystem. A combined normalization does not improve the situation.     

一种在秘密共享中骗子的检测方案

提出了一种能正确确定欺骗者的方案。此方案具有在验证时运算简单、快速的特点。对此方案的攻击如同大数分解一样困难。     

Contamination of the Chalk Aquifer by Chlorinated Solvents: A Case Study of the Luton and Dunstable Area

A detailed investigation of contamination by chlorinated solvents of the Chalk Aquifer underlying the towns of Luton and Dunstable was undertaken to assess the extent, causes and mechanisms of pollution. The research programme incorporated land-use surveys, regional groundwater surveys, monitoring of groundwater abstraction points and aquifer profiling by means of the drilling of observation boreholes, the analysis of the recovered core material and the depth sampling of these and other boreholes.
Low-level solvent contamination of the Chalk Aquifer was found to be widespread with 'hotspots'of higher concentrations. At the drilling sites, both the saturated and unsaturated zones were contaminated with solvents, although free product was not observed. The presence of an additional contaminant, oil, at some sites was noted to influence the distribution of solvents within the aquifer.
Clean-up of the aquifer is not a practical option, and treatment of the groundwater at the abstraction points has been adopted.     

Productivity and costs of slash bundling in Nordic conditions

The number of slash bundlers and the volume of slash bundling have been rapidly increasing during the last few years in Finland. However, no comprehensive time or follow-up studies have been carried out on slash bundling technology in Finland or in any other country. Metsäteho Oy carried out studies on the productivity and costs of slash bundling in different Nordic recovering conditions. The study methods included both time and follow-up studies. Data were collected during the summer and winter period primarily in Norway spruce (Picea abies L. Karst.) dominated clear cutting sites. The bundling techniques performed by different types of bundler (Fiberpac 370, Timberjack 1490D, Pika RS 2000, Valmet WoodPac) were studied.

The average productivity of slash bundling was 18.1 bundles per operating (E₁₅, including delays shorter than 15 min) hour with the Timberjack 1490D and Fiberpac 370 bundlers in the follow-up study. The operator of the slash bundler had the greatest effect on the productivity of bundling. The prerequisite for increased bundling volumes is a reduction in the costs of the most expensive sub-stage of the bundling supply chain, i.e. bundling itself. This requires improved recovery conditions at bundling sites, increased bundling productivity, larger sized bundles, and the execution of bundling operations in two work shifts using an efficient bundler and effective operator working methods. Implementation of these development measures will bring the bundling supply chain up to a speed that makes it the most competitive supply chain for forest chips in terms of total supply costs for long-distance transportation distances of more than 60 km.