Tuning of shear thickening behavior and elastic strength of polyvinylidene fluoride via doping of ZnO-graphene

ZnO rice like nonarchitects are grafted on the graphene carbon core via a rapid microwave synthesis route. The prepared grafted systems are characterized via XRD, SEM, RAMAN, and XPS to examined the structural and morphological parameters. Zinc oxide grafted graphene sheets (ZnO-G) are further doped in β-phase of polyvinylidene fluoride (PVDF) to prepare the polymer nanocomposites (PNCs) via mixed solvent approach (THF/DMF). β-phase confirmation of PVDF PNCs is done by FTIR studies. It is observed that ZnO-G filler enhances the β-phase content in the PNCs. Non-doped PVDF and PNCs are further studied for rheological behavior under the shear rate of 1–100 s⁻¹. Doping of ZnO-G dopant to the PVDF matrix changes its discontinuous shear thickening (DST) behavior to continues shear thickening behavior (CST). Hydrocluster formation and their interaction with the dopant could be the reason for this striking DST to CST behavioral change. Strain amplitude sweep (10⁻³% -10%) oscillatory test reveals that the PNCs shows extended linear viscoelastic region with high elastic modulus and lower viscous modulus. Effective shear thickening behavior and strong elastic strength of these PNCs present their candidature for various fields including mechanical and soft body armor applications.     

基于儒可夫斯基变换的涡轮钻具叶片设计及性能分析

为提高涡轮钻具叶片使用性能和创新叶片设计理论,提出了基于儒可夫斯基保角变换法与经典水力翼型相结合的涡轮钻具叶片设计新方法,以?127涡轮钻具叶片为研究对象,运用搭建的涡轮钻具叶型参数化设计平台和自主设计的涡轮钻具性能测试台架,完成了5种翼型的造型设计,研究了5种叶片流场性能,开展了设计叶片的性能测试实验,对比分析了设计叶片与塔里木油田某型在役?127涡轮叶片的实际效能。实验及仿真结果表明,基于新方法设计的NACA-0012翼型加厚叶片在600 r/min转速及15 L/s流量的设计工况下,其单级扭矩达5.83 N·m,较相同条件下某在役?127涡轮的单级扭矩提高约6.4%,级效率提高约1.16%,整体性能有了实质提升。     

咸味米粥增稠稳定剂的研究

以粘度和悬浮时间这两项指标作为性能评价指标,对常见的几种增稠稳定剂进行复配增效实验的研究评价,筛选出一种高粘度的复合增稠稳定剂,应用于咸味米粥罐头中,有效解决了咸味米粥罐头分层、稳定性能差的难题。     

Analytic Model of Laminar‐Turbulent Transition for Bingham Plastics

It is often desirable to operate industrial pipelines transporting non‐Newtonian materials near the transition from laminar to turbulent flow. For the commonly used Bingham plastic model, the Hedström technique overestimates turbulent flow friction losses because it does not take account of viscous‐layer thickening. In the present paper, the Wilson‐Thomas model is applied to predict the transition point for Bingham plastics. Laminar and turbulent friction losses are calculated to show that conditions at transition depend only on the Hedström number. The results are approximated by simplified fit functions. Comparison with existing empirical correlations and experimental data from various sources shows satisfactory agreement.     

Rheological properties of bitumen in water emulsions with added solids

Experimental work was carried out to investigate the rheological properties of bitumen in water emulsions containing solids of different shape and size. The bitumen volumetric concentration was varied up to 60%, solids free basis, and the solids volume fraction (total volume basis) was varied up to 0.2. Irregular-shaped silica sand (average diameter: 9 and 33 μm) and smooth spherical glass beads (average diameter: 27 and 44 μm) were used as the added solids. In the low shear stress range, shear thinning behavior was observed for bitumen in water emulsions. At high shear stress, the viscosity of the emulsions became fairly independent of the shear stress. The addition of solids to the bitumen emulsions increased the mixture viscosity. The addition of irregular-shaped silica sand gave a higher viscosity than a similar addition of the spherical glass beads. The viscosity of the emulsion/solids mixtures was influenced by the solids size as well; the smaller size particles gave a higher viscosity. The addition of solids to the bitumen emulsions also induced shear thickening (dilatancy) behavior at high solids volume fraction. The degree of the shear thickening increased with the oil concentration.     

羟丙基糯米粉糊的特性及应用初探

研究了羟丙基糯米粉糊的性质，以及流变特性和温度影响流变特性的规律，并对其在蚝油食品中作为增稠稳定剂的应用做了初步研究。结果表明，糯米粉经羟丙基化后，凝沉性更弱，受热易于成糊和分散，糊的粘度提高，冻融稳定性极佳，透明度大为提高，但是抗剪切稳定性反而降低。在实验测定的温度下，羟丙基糯米粉糊呈现假塑性流体的特征且假塑性随醚化程度的提高而增强。应用试验表明其增稠效果好、稳定性高，可用做增稠稳定剂。     

两段浓缩、两段回收模式的煤泥水流程

介绍了选煤厂通常采用的单段浓缩、单段回收模式的煤泥水处理流程存在的局限性,阐述了两段浓缩、两段回收模式煤泥水处理流程中四个作业的主要作用及工艺要求,根据多年的设计经验和选煤厂生产实践,对煤泥水浓缩及粗、细煤泥脱水回收设备的选型提出了看法和建议。     

基于动态硼酸酯键改性黄原胶的性能

基于苯硼酸聚合物可以与存在于黄原胶糖环单元结构中的伯、仲醇羟基通过硼酸酯键形成动态共价微交联结构的性质对黄原胶进行改性。以偶氮二异丁基脒二盐酸盐（AIBA）为引发剂，通过水相自由基聚合，制备了不同共聚比的丙烯酰胺（AM）、N-(3-二甲氨基丙基)丙烯酰胺（DMAPAM）和3-丙烯酰胺基苯硼酸（AMBB）的三元共聚物P(AM-co-DMAPAM-co-AMBB)。通过1H NMR、FTIR、元素分析和光散射对聚合物结构及相对分子质量进行了表征，并对其与黄原胶复配体系的增黏性、流变性、抗老化性及抗干扰性进行了评价。结果表明：P(AM-co-DMAPAM-co-AMBB)与黄原胶复配后对黄原胶溶液具有明显的增黏性，其中苯硼酸单体的摩尔比为1.0 mol%的聚合物对黄原胶溶液的增黏幅度达43.8%，在8074 mg/L的矿化水中增黏幅度高达56.4%，且复配体系具有良好的抗老化降解性，对乙二醇和1,3-丙二醇具有较强的抗干扰性。     

在压力机一次行程中冲孔、翻边和增厚边缘

研制了可在压力机一次行程中实现冲孔、翻边和增厚边缘的装置。还研制了在板坯的预冲孔上增加边缘厚度用装置。列出了零件制造过程的主要参数计算方法。     

THICKENING TECHNIQUE OF CYCLONEFLOCCULATED SEDIMENTATION

ＴＨＩＣＫＥＮＩＮＧＴＥＣＨＮＩＱＵＥＯＦＣＹＣＬＯＮＥＦＬＯＣＣＵＬＡＴＥＤＳＥＤＩＭＥＮＴＡＴＩＯＮ￥Ｙａｎｇ，Ｘｉａｏｓｈｅｎｇ；ｃｈｅｎＪｉｎ；Ｌｕ，Ｇｕｉｚｈｉ；Ｃｈｅｎ，Ｔｉｎｇｚｈｏｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＭｉｎｅｒａｌＥｎｇｉｎ...