喷雾型地板上光蜡的研制

喷雾型地板上光蜡也称乳剂型地板上光蜡，是蜡和乳化剂在加热搅拌条件下进行乳化反应而生成的水乳状液蜡上光剂，生产工艺简单，稳定性和上光效果较好，本文对新型光蜡的典型配方和影响乳液稳定性，上光效果的诸因素进行研究，找出配制稳定剂乳液及提高上光效果的最佳工艺条件。     

非木本木质素磺酸镁对水泥净浆和砂浆性能的影响

用红外光谱法等测定了非木本木质素磺酸镁的结构特征参数,研究了其对水泥净浆和砂浆性能的影响,并与木本木质素磺酸钙进行了对比。非木本木质素磺酸镁结构中的甲基、酚羟基、芳香环比木质素磺酸钙少;特性黏度为 0. 61mL/g,仅是木质素磺酸钙的 61%;磺化度为 0 78mmol/g,比木质素磺酸钙低约 40%。木质素磺酸镁溶液的最低表面张力为 49 82mN/m,起泡性能与木质素磺酸钙相近。非木本木质素磺酸镁对水泥净浆和砂浆减水分散作用为木本木质素磺酸钙的 86 6% ~91 1%。但掺质量分数 0 5%的木质素磺酸镁的砂浆, 28d的抗压强度比掺木质素磺酸钙的高 70 5%。     

Spectral‐ALS data fusion for different roughness parameterizations of forested floodplains

Natural river floodplains and adjacent wetlands grow typically a diverse and heterogeneous combination of herbs, shrubs and trees, which play an essential role in determining the total flow resistance. Hydrodynamic effects of trees in forested floodplains can provide the majority of flow resistance during flood events. Nevertheless, ground‐based techniques to acquire vegetation parameters are expensive and difficult to apply over long reaches. This paper presents a novel method of automated roughness parameterization of riparian woody vegetation by fusion of Quickbird multi‐spectral image with airborne laser scanning (ALS) data. The data fusion approach includes: individual tree detection and estimation of vegetation metrics from light detection and ranging (LiDAR) data, assessment of predictive models for the vegetation parameters and spatial mapping of the vegetation parameters for the forest plants in the riparian corridor. The proposed method focuses on estimation of plant density (d), crown diameters (D_C), tree height (h), stem diameter (D_S), crown base height (cbh) and leaf area index (LAI). The procedure is tested along a 14‐km reach of the Sieve River (Tuscany, Italy) characterized by high woody plant density. Due to the complex study area, the data fusion approach explains with variable reliability the local vegetation properties (R²(D_C) = 0.14, R²(h) = 0.84, R²(D_S) = 0.25, R²(cbh) = 0.66). The generated structural parameter maps represent spatially explicit data layers that can be used as inputs to hydrodynamic models used to analyse flow resistance effects in different submergence conditions of vegetation. A simple flow resistance model was applied over a test area comparing the results of the proposed method and a traditional ground‐based approach. The modelling results showed that the new method is able to provide accurate output data to describe the interaction between water levels and bio‐mechanical characteristics of vegetation. The proposed methodology provides a fast, repeatable and accurate way of obtaining floodplain roughness, which enables regular updating of vegetation characteristics. Copyright © 2010 John Wiley & Sons, Ltd.     

华东地区水湿生木本植物综合评价与 筛选

随着海绵城市建设的推进,水湿生木本植物的应用受到越来越多的关注和重视。运用层次分析法从观赏性、新优性、生物学特性、生态性和经济性5个方面,筛选评价指标,确定各指标的权重,建立综合评价体系,并对124种水湿生木本植物(含少量品种)进行评价,根据综合得分将其分为4个等级：其中评分为Ⅰ级的树种26种,Ⅱ级的树种38种,这2级可以作为华东地区水湿生植物群落营造的推荐树种,Ⅲ级和Ⅳ级树种共60种,这2级适宜作为群落多样性的备选或补充树种。研究结果可为华东地区营造水湿生植物景观、湿地造林、生态修复以及海绵城市建设提供科学依据。     

Woody Breast短期贮藏中肉质的变化

为研究近年来速生型肉鸡鸡胸肉硬度缺陷(woody/wooden breast,WB)俗称"木质肉"在短期贮藏中生肉肉质参数的变化。实验选取68只42日龄Cobb 500肉鸡作为研究对象,经宰杀后人工分级为低(normal,NORM)、高(severe,SEV)两组(n=34只/组)。在不同时间节点下(1、3、8 d)对所有样本测定质量、挤压力(compression force,CF)、滴水损失(drip loss,DL)、肌节长度(sarcomere length,SL)及肉破碎化指数(gravimetric fragmentation index,GFI)。对所有参数进行组间(不同WB等级间,不同时间节点)显著性分析,同时对各参数与WB等级间进行相关性分析。结果表明:SEV样本质量、CF、SL、GFI在贮藏时间节点处都显著高于NORM样本(P0.05),DL在1 d时NORM与SEV间无差异,在3~8 d时显著上升(P0.05)。CF、SL、GFI在1~3 d时,所有样本都显著减小(P0.05),3~8 d时CF无显著变化(P0.05),SL、GFI在NORM样本间无差异但在SEV样本间继续减小(P0.05)。相关性分析表明,CF、累积DL与WB等级极显著相关(P0.01),SL、GFI随时间变化与WB硬度减小存在联系。综上可知,SEV生肉肉质较NORM差,WB硬度随贮藏时间变长而减小,但其生肉品质并不会发生改变,因此对WB检测应在宰杀当天在线进行,且WB硬度由多种原因共同作用导致。     

Determination of biomass accumulation in mixed belts of Salix,Corylus and Alnus species in combined food and energy production system

Given the energetic, demographic and the climatic challenges faced today, we designed a combined food and energy (CFE) production system integrating food, fodder and mixed belts of Salix, Alnus and Corylus sp. as bioenergy belts. The objective was to assess the shoot dry weight-stem diameter allometric relationship based on stem diameter at 10 (SD₁₀) and 55 cm (SD₅₅) from the shoot base in the mixed bioenergy belts. Allometric relations based on SD₁₀ and SD₅₅ explained 90–96% and 90–98% of the variation in shoot dry weights respectively with no differences between the destructive and the non-destructive methods. The individual stool yields varied widely among the species and within willow species with biomass yield range of 37.60–92.00 oven dry tons (ODT) ha⁻¹ in 4-year growth cycle. The biomass yield of the bioenergy belt, predicted by allometric relations was 48.84 ODT ha⁻¹ in 4-year growth cycle corresponding to 12.21 ODT ha⁻¹ year⁻¹. The relatively high biomass yield is attributed to the border effects and the ‘fertilizing effect’ of alder due to nitrogen fixation, benefitting other SWRC components. On termination of 4-year growth cycle, the bioenergy belts were harvested and the biomass yield recorded was 12.54 ODT ha⁻¹ year⁻¹, in close proximity to the biomass yield predicted by the allometric equations, lending confidence and robustness of the model for biomass yield determination in such integrated agro-ecosystem.     

Hydromorphological,hydraulic and ecological effects of restored wood: findings and reflections from an academic partnership approach

Large wood (re)introduction can deliver multiple benefits in river restoration, but there is a dearth of the detailed and longer‐term post‐project monitoring and evaluation required for improving best practice. We present findings from an academic partnership approach to post‐project evaluation, based on successive MSc research projects on restored large wood in the Loddon catchment, UK. Field and modelling data reveal: (i) key differences in large wood features between restored and natural reaches; (ii) increased hydraulic retention and changes to mesohabitats associated with large wood; (iii) differences in macroinvertebrate community composition around large wood but a lack of site‐level effects; (iv) interactions between macrophytes and large wood that may be specific to restored reaches; (v) a need for further field and modelling studies to inform the accurate representation of large wood in hydraulic models. Some key challenges in partnership working are identified to aid planning and effectiveness of future collaborations.