Removal of As(V) Ions from Solution by Akaganeite bgr-FeO(OH) Nanocrystals

The original method is developed for producing the new inorganic sorption material of akaganeite bgr-FeO(OH). The material in question is characterized relative to arsenic contained in aqua. The possibility is established for removing arsenate ions from water by contemporary physicochemical methods.     

复合吸附剂提高催化裂化柴油安定性的研究

用改性活性白土吸附精制催化裂化柴油，精制后柴油的安定性得到显著提高。对精制后柴油的分析表明：复合吸附剂能够大幅降低油品中的总硫和碱性氮含量，对油品其它性质无大的影响。     

重油催化裂化干气氢提纯技术的开发

石家庄炼油厂和西南化工研究设计院合作开发的中国石化系统第一套利用变压吸附技术进行RFCC干气氢提纯工业试生产装置一年的平稳运行说明：提纯后产品氢纯度达99．9％，回收率大于85％；操作简便灵活；装置负荷弹性裕度大；经济效益显著。实践证明它是一项富有吸引力的新工艺，为重油催化裂化装置的挖潜增效展示了美好的前景。     

膨润土在废水处理中的应用综述

随着环境保护标准的日益严格，开发新型、廉价、高效的水处理材料也日趋紧迫。首先简要地介绍了非金属矿物材料——膨润土的矿物学特征。这些特征使得膨润土具有许多优良的基本特性，如电负性、离子交换性能等等。如果进一步针对膨润土的一种或者某些特性加以改性，膨润土就非常有可能在实际工程中被广泛应用。其次较为详细地综述了膨润土在废水处理中应用的现状，主要是作为制备吸附剂和絮凝剂的原料。而且，由膨润土改性所制成的吸附剂或絮凝剂对废水中的无机、有机污染物都有较为理想的去除率。最后，对膨润土的应用前景进行了展望。     

Effects of multiple weak interactions on the binding of phenolic compounds by polymeric adsorbents

To investigate the effects of multiple weak interactions on the binding of phenolic compounds by polymeric adsorbents, macroporous polystyrene (PS) resin and PS‐based adsorbents with different hydrogen‐bond acceptor atoms (PS CH₂( OCH₂CH₂)_n OCH₃, n = 0, 1, 2, and 3, denoted as PS‐EG₀, PS‐EG₁, PS‐EG₂, and PS‐EG₃) were prepared. The phenol adsorption strength order on these adsorbents was PS/PS‐EG₀ < PS‐EG₁ < PS‐EG₂ < PS‐EG₃, indicating that the adsorption on PS and PS‐EG₀ was driven by hydrophobic and π–π interactions, and the adsorption on PS‐EG₁, PS‐EG₂, and PS‐EG₃ was driven by a hydrogen bond in addition to hydrophobic and π–π interactions. PS‐EG₂ may adsorb a second phenol molecule on each binding site and PS‐EG₃ may adsorb second and third ones. The adsorption strength of resorcinol increased in the order of PS, PS‐EG₁, and PS‐EG₂, indicating that the adsorption was driven by 0, 1, and 2 hydrogen bonds in addition to hydrophobic and π–π interactions. Similarly, the adsorption of phloroglucinol on PS, PS‐EG₁, PS‐EG₂, and PS‐EG₃ was driven by 0, 1, 2, and 3 hydrogen bonds in addition to hydrophobic and π–π interactions because the adsorption strength increased in this order. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4652–4658, 2006     

分形理论在固体吸附式制冷系统中的应用研究

固体吸附式制冷系统中吸附剂一般是多孔介质结构，吸附剂的内部结构特征对传热特性和吸附质的传质特性有直接影响，进而影响吸附解吸时间。本文探讨利用分形理论来分析固体吸附剂的结构特点，为目前通过对吸附剂的固化处理来提高吸附剂的传热速率的处理方法提供理论上的分析，并指出最佳分形维数的分形结构。     

吸附法脱除乙烯中少量氧气的吸附剂研究

采用重量法在电子天平上研究了Ｃ２Ｈ４和Ｏ２单组份在５Ａ、１３Ｘ、丝光沸石和碳分子筛等不同吸附剂上的吸附平衡性质和扩散动力学性质。结果表明，在沸石类吸附剂上，Ｃ２Ｈ４的平衡吸附量远大于Ｏ２的平衡吸附量，Ｃ２Ｈ４的吸附扩散速率也大于Ｏ２的扩散速率；在碳分子筛吸附剂上Ｃ２Ｈ４的平衡吸附量大于Ｏ２的平衡吸附量，但Ｏ２的吸附扩散速率远大于Ｃ２Ｈ４的扩散速率，其扩散系数是Ｃ２Ｈ４的２３９倍。单柱评价结果表明，Ｃ２Ｈ４－Ｏ２混合组份通过该碳分子筛吸附剂时，Ｏ２的破点时间长，Ｃ２Ｈ４的纯度可达１００％。加压有利于选择吸附Ｏ２，而且加压吸附、常压脱附再生性能好。该碳分子筛是脱除高浓度乙烯中少量氧气的理想吸附剂。     

Study of Desorption Agent for LADS Process

This article refers to the procedure for selection, evaluation and development of the LADS-D desorption agent associated with the LADS-A adsorbent used in the non-hydroprocessing adsorptive desulfurization (LADS) process for FCC naphtha developed by LPEC Refining Research Institute. The LADS-D desorption agent can effectively remove the sulfides adsorbed on the LADS-A adsorbent. The saturated LADS-A adsorbent can be instantly regenerated by the LADS-D desorption agent to recover its adsorption activity. The LADS-D desorption agent can not only effectively remove all impurities adsorbed on the adsorbent, but also has strong ability to dissolve the impurities to keep a stable desorption efficiency of adsorbent to be basically commensurate with fresh adsorbent after extended use.     

钛掺杂硅胶块体吸附剂

以陶瓷纤维纸片为基材,顺次经水玻璃、酸性钛盐溶液浸渍共沉淀制得新型陶瓷基钛掺杂硅胶块体吸附剂.多孔介质表面分析显示:掺杂硅胶孔径在0.5～6 nm范围,以中孔为主.Fourier变换红外谱在波数954 cm 1处的特征吸收峰表明吸附剂中形成了Si-O-Ti键.根据掺杂前后固体魔角核磁共振硅谱中硅原子化学位移的变化(向高场方向移动)及X射线光电子能谱中各原子结合能的变化(Ti2p3/2的结合能随钛含量的增加而增加,而Si2p,O1s的结合能则呈相反趋势)进一步表明:钛原子替代硅原子进入硅胶网络.热重分析及烧结实验结果显示:钛掺杂吸附剂具有更好的热稳定性.新型吸附剂优异的吸附性能除了与其高的比表面积相关外,还与Ti-O键对水分子的亲合力紧密相关,其耐热性能增强与形成高热稳定性Ti-O Si键及材料表面导热性能提高有关.     

活性炭变压吸附回收环氧乙烷装置排放气中的乙烯

以活性炭为吸附剂，对工业环氧乙烷装置排放气中乙烯的回收进行了研究。测定了环氧乙烷装置排放气中主要组分的吸附等温线及脱附性能，发现活性炭对乙烯的吸附量较高，与氧气、氮气和氩气等组分的分离度较大。在此基础上，研究了活性炭的变压吸附性能，在常规真空脱附工艺条件下，乙烯的回收率较低，但通过提高脱附真空度或进行甲烷反向吹扫，可以大大提高乙烯回收率和惰性气体的脱附率。