中频用极薄热轧硅钢片的研制

选用合适成分，采用两次折叠、16层叠轧的方法开发出性能优异的0．25mm厚的中频（400、1000Hz）用权薄热轧硅钢片，已用于生产，并取得良好成绩。     

Semi-automated feature-tracking of East Antarctic sea ice from Envisat ASAR imagery

While feature tracking of sea ice using cross-correlation methods on pairs of satellite Synthetic Aperture Radar (SAR) images has been extensively carried out in the Arctic, this is not the case in the Antarctic. This is due to the dynamic nature of Antarctic pack ice, its microwave signature, the tendency for SAR swath paths to be poorly aligned with the often narrow sea ice zone around the continent and inadequate satellite sampling. A semi-automated system, known as IPADS (IMCORR [IMageCORRelation] Processing, Analysis and Display System), has been developed to map fast ice and pack ice in Antarctica using multiple pairs of SAR images. The software processing pipeline uses overlapping image pairs which are geocoded and roughly registered using only data contained in the image headers. Next, fast ice maps are rapidly generated using zero motion features located within ocean regions. This also provides precise image registration. Finally, the same image pairs are re-examined for pack ice motion in a slower off-line batch process. The pack and fast ice are identified using a cluster-based search method which compares both location and motion information. Each image pair generates a NetCDF file which adds to a growing database of Antarctic sea ice motion and ice roughness. Five image-pair examples are presented to illustrate the methods used as well as their strengths and limitations. Substantial pack ice motion can often be detected in the marginal ice zone on SAR images only a few days apart.     

山西境内可开发利用水力资源分析

山西省境内水力资源蕴藏量丰富 ,技术可开发量非常可观 ,在分析全省各河流水力资源的基础上 ,探讨了最具发展潜力河流和河段的开发价值 ,并提出开发过程中应注意的事项。     

IPv6实验网的组建和测试分析

主要介绍设计、搭建IPv6实验网，并在此基础上捕获数据包，测试协议性能。通过分析数据包的结构，验证了IPv6网络的特点：地址匹配的方便性、数据报头的简洁性。通过设计和组建IPv6／IPv4双协议栈路由器，介绍了一种通过IPv4网络转发IPv6数据包的双协议栈隧道技术。     

Territorial development in the Cape Verde archipelago under the Estado Novo dictatorship (1953–1974)

Despite Portugal's neutrality in the Second World War (1939–1945), the subsequent new world order meant that the Portuguese Government felt obliged to revise its overseas policies. A new regional awareness could be seen in the Six-Year National Development Plans launched by Estado Novo from 1953 until the revolution of 1974. The territory and its strategic potential were emphasized in the context of national policies of overseas urbanization. Interventions in Cape Verde are visible particularly in the First Development Plan, which was based on equipping the province's public facilities. The methodology of intervention involved setting up missions aimed at planning a set of specific public works which were essential to the development of existing settlements. A sharp increase in the development of the territory through the work of specialized brigades took place in the Third Development Plan, when a set of public works on road, hydraulic and electricity networks was undertaken. The planning of infrastructures that was undertaken in these years was essential to the development of the archipelago and the resulting regional and urban land-use planning of the various islands.     

阳城煤矿1307综放工作面支架安装工艺与实践

 针对阳城煤矿1307综放工作面切眼倾角较大的实际情况,通过校核提运系统绞车强度,确定工作面基本支架采取顺槽组装、切眼内整体下放安装,过渡支架切眼内直接安装的方法,采用相关安装工艺,制定相关安全技术措施,实现了大倾角综放工作面支架安全、快速安装。     

Corrosion Behavior of Fe–Al Coatings Fabricated by Pack Aluminizing Method

In this study,the two kinds of Fe–Al coatings were fabricated by pack aluminizing on low-carbon steel at different temperatures.The corrosion behavior of the Fe–Al coatings in artificial seawater was investigated by the electrochemical and weight loss techniques.Results show that the thickness of coating layer increases with increasing aluminizing temperature.The coatings exhibit high micro-hardness and good metallurgical bonding with the substrate.In comparison with the steel substrate,the corrosion current density Icorrof the Fe–Al coatings is always lower than that of substrate,about 1/38 or 1/33 after 2 h immersion,and 1/3 or 1/6 for 720 h immersion.As can be seen from the weight loss curve,the Fe–Al coatings show less loss than that of the substrate within 30-day immersion.The corrosion products formed on the surface of the coatings include oxides of Al,Mg,Fe and Ca,and pitting defect has also been found.The Fe–Al coating with higher content of Fe_2Al_5 has better corrosion resistance.     

Novel pack cementations: direct current field assisted pack cementations

Abstract

Direct current field (DCF) assisted pack cementation processes are designed to overcome the problems of higher processing temperature and longer time in conventional pack cementations (CPCs). Anode and specimen as cathode are parallel with each other, and are embedded in powder agents, all of which are sealed in a stainless steel box. Effects of DCF on pack cementations, including boriding, nitrocarburising, aluminising, siliconising and chromising, have been investigated by applying DCF between the electrodes during soaking. The results indicate that DCF can greatly enhance all these cementations. Effective pack cementations can be carried out at a lower temperature and/or by shorter soaking time with the help of DCF. Direct current field endows the treated specimen with properties being the same as or superior to that by CPC. It is proposed that DCF makes the concentrations of required element at and around the cathode specimen’s side facing the anode much higher than in any other positions in the CPC process by forcing required element containing species diffusing towards the cathode, which leads to reduction of the absorption of the required element by inner wall of the box and the non-working surface of the specimen. The physical effects of the DCF on the enhanced cementation are discussed.     

挑斜向顺山大棚拆除综采支架

百善矿利用挑斜向顺山大棚拆除综采支架,摸索出一种既安全又快捷的支架拆除方法.     

Hot Corrosion Behavior of a Cr-Modified Aluminide Coating on a Ni-Based Superalloy

A Cr-modified aluminide coating is prepared on a Ni-based superalloy using arc ion plating and subsequent pack cementation aluminizing.Hot corrosion behavior of the Cr-modified aluminide coating exposed to molten Na2SO4/K2SO4(3:1) or Na2SO4/NaCl(3:1) salts at 900 °C in static air are evaluated as well as the aluminide coating.The results indicate that compared with the aluminide coating,the anti-corrosion properties of the Cr-modified aluminide coating in the both salts are improved,which should be attributed to the beneficial effect of the Cr in the coating.The corrosion mechanism of the Cr-modified aluminide coating,especially the role of Cr in the mixture salt corrosion,is discussed.