用攀枝花钛矿和云南钛矿冶炼钛渣工业试验研究

通过磁性测量和X-射线衍射研究了Gd2(Co，Al)17化合物的结构和磁晶各向异性。当x≤4时，样品具有菱方Th2znl7型结构，x=5时，具有六方CaCu5型结构。随着Al浓度增加，晶格常数和单胞体积单调增大，而居里温度和自发磁化强度近似线性地减小；在x≥l时，观察到Co亚点阵的磁晶各向异性变号，室温易磁化方向由易面转变为易轴，且易轴各向异性场和各向异性常数随Al原子浓度增加出现极大值；基于补偿温度(65K)下自由粉末颗粒的磁化曲线，导出了亚点阵间的分子场系数和Gd-co交换耦合常数，结果表明，Al原子对Gd-Co交换耦合作用的影响较小。根据Al原子在Co亚点阵4种晶位的择优占位，分析了磁晶各向异性的演变。     

Gd2O2S：Ti的长余辉性能研究及机理探讨

利用高温固相法合成了一种长余辉发光材料Gd2O2S：Ti，利用XRD测试了其结构并测试了其在紫外光激发下的发光特性；停止照射，有橙色的余辉，时间接近2h。分析该磷光体的发光和余辉产生细节，认为空穴和电子的复合导致Ti^3＋的^2E→^2T2的跃迁是产生发光和余辉的原因；并根据缺陷和空位对Gd2O2S：Ti的余辉机理进行探讨，提出了余辉机理模型。     

Ce、Gd、Ce/Tb、Gd/Tb单双掺杂ZCB基质光致发光性质

采用高温固相法在弱还原气氛下,分别合成了单掺Ce3+、Gd3+和双掺Ce3+/Tb3+、Gd3+/Tb3+的ZnO-CdO-B2O3(ZCB)基质系列荧光体.光谱分析表明:Ce3+的5d→4f(2F7/2,2F5/2)和Gd3+的8P7/2→8S7/2跃迁的强发射分别对应于427 nm和574 nm,而Ce3+/Tb3+和Gd3+/Tb3+的强发射分别对应于546 nm和548 nm.双掺Ce3+/Tb3+、Gd3+/Tb3+的荧光体比单掺Tb3+的发射强度显著增强,这表明存在Ce3+→Tb3+、Gd3+→Tb3+的能量传递,且Ce3+和Gd3+都是Tb3+的优异敏化剂.     

钆内嵌金属富勒烯的制备、分离及质谱表征

利用自制的电弧炉,通过电弧放电法合成了内嵌金属富勒烯Gd@C82,研究并获得了制备钆金属富勒烯的最佳工艺条件：摩尔比Gd：C=1：15,电流I=90～100A,氦气压力0．08MPa;探讨并获得了Gd@C82新的萃取分离条件：常温下以DMF为溶剂,抽真空至压强为0．01MPa下萃取;讨论了内嵌金属富勒烯的生成和分离机理。     

Synthesis of Polycrystalline Yb:Gd_3Ga_5O_(12) Nanopowders by Homogeneous Precipitation Method

The Ytterbium doped gadolinium gallium garnet [Yb3+:Gd3Ga5O12, Yb:GGG] precursor powders were synthesized via homogeneous precipitation method using Yb2O3, Ga2O3, Gd2O3 and ammonium bicarbonate [NH4HCO3] as precipitator, and ammonium sulfate [(NH4)2SO4] as additive. The evolution of phase composition and micro-structure of the powders were characterized by TG- DTA, XRD, IR, and TEM. The results indicate that all precursor powders completely transform to Yb:GGG phase by calcining at 900 ℃ for 8 h, the resultant powders are well dispersed and have smaller particle size approximately 80 nm owing to the electrostatic effect.     

中温固体电解质Ce_(0.8)Gd_(0.2-x)Y_xO_(2-δ)(x=0,0.05,0.10)的制备与性能研究

用溶胶-凝胶法合成了固体电解质Ce0.8Gd0.2-xYxO2-δ(x=0,0.05,0.10).用X射线衍射谱、拉曼光谱分析了样品的微观结构,用交流复阻抗谱研究了样品的电学性能.结果表明:800℃焙烧的所有样品均为具有氧缺位的单相立方萤石结构,晶胞参数随钇(Y)掺杂量增加而减小.钇掺杂量x=0.05的样品Ce0.8Gd0.15Y0.05O2-δ的电导率最高,导电活化能最小,(σ700℃=5.58×10-3S·cm-1,Eα=0.92 eV),高于未掺杂Y的Ce0.8Gd0.2O2-δ样品的电导率(σ700℃=5.38×10-3S·cm-1Eα=1.09 eV).说明适量双掺杂Y提高了Ce0.8Gd0.2-xYxO2-δ的电导率并且降低了其活化能.     

Mg-6Al-1Nd-1.5Gd合金的高温蠕变机制

采用高温蠕变装置,研究了Mg-6Al-1Nd-1.5Gd合金在150、175、200℃以及50、70、90 MPa条件下的高温压缩蠕变行为,分析合金在高温蠕变过程中的蠕变机制。结果表明,Mg-6Al-1Nd-1.5Gd合金的平均应力指数及蠕变激活能分别为4.64和73.87kJ/mol,其主要蠕变机制是由位错攀移和晶界扩散共同作用,合金的蠕变本构方程为:ε=1.877×10-8σ4.641exp[-73 865/(RT)];合金在高温蠕变过程中,微观组织中的位错密度逐渐增大,出现位错缠结及位错堆积,合金蠕变后的晶粒变得粗大,金属间化合物Al3Nd和Al3Gd在晶界上出现偏聚。     

Ag-Pd-5Ru-Gd四元系部分相图的700℃等温截面

在Ag Pd Gd ,Ag Pd Ru ,Ag Ru Gd和Pd Ru Gd三元系合金相图的基础上 ,采用X射线衍射 ,差热分析、扫描电镜和显微金相分析等方法研究了Ag Pd Ru Gd(x(Ru) =5 % ,x(Gd) <2 5 % )四元系相图的 70 0℃等温截面。结果表明 :该截面上包含有 2个单相区 ,即Pd(Ag)和Pd3 Gd ;4个两相区 ,即Pd(Ag) (Ru) ,Pd(Ag) Pd3 Gd ,(Ru) Ag51Gd14 ,(Ru) Pd3 Gd ;3个三相区 ,即Pd(Ag) Pd3 Gd (Ru) ,Pd(Ag) Ag51Gd14 (Ru) ,Pd3 Gd Ag51Gd14 (Ru) ;1个四相区 ,即Pd(Ag) Pd3 Gd Ag51Gd14 (Ru)。未发现新的四元中间相     

Phase equilibria and microstructure development in Mg-rich Mg-Gd-Sr alloys: Experiments and CALPHAD assessment

Mg-Sr alloys are promising to fabricate orthopedic implants. The alloying of rare earth elements such as Gd may improve the comprehensive mechanical properties of Mg-Sr alloys. The information on the phase diagram and the microstructure development are required to design chemical composition and microstructure of Gd alloyed Mg-Sr alloys. The phase equilibria and the microstructure development in Mg-rich Mg-Gd-Sr alloys (Gd, Sr < 30 at. %) are experimentally investigated via phase identification, chemical analysis, and microstructure observation with respect to the annealed ternary alloys. The onset temperatures of liquid formation are measured by differential scanning calorimetry. A thermodynamic database of the Mg-rich Mg–Gd–Sr ternary system is developed for the first time via CALPHAD (CALculation of PHAse Diagram) approach assisted by First-Principles calculations. The thermodynamic calculations with the developed database enable a well reproduction of the experimental findings and the physical-metallurgical understanding of the microstructure formation in solidification and annealing.