工业烟气脱硫脱硝新技术研究进展

依据大量文献,综述了近几年来从工业烟气中脱除有害气体SO_2和NO_(?)的新技术。着重论述了国外在高能电子束辐射技术和脉冲流光电晕放电技术方面的新进展。通过比较单位能耗的脱除率,指出了电晕放电技术的优越性。并概述了近几年来作者参与脉冲电晕放电脱硫脱硝的研究情况,提出了进一步研究此课题的建议。     

Pharmaceutical and personal care products in tile drainage following surface spreading and injection of dewatered municipal biosolids to an agricultural field

Land application of municipal biosolids can be a source of environmental contamination by pharmaceutical and personal care products (PPCPs). This study examined PPCP concentrations/temporally discrete mass loads in agricultural tile drainage systems where two applications of biosolids had previously taken place. The field plots received liquid municipal biosolids (LMB) in the fall of 2005 at an application rate of ∼ 93,500 L ha^− 1, and a second land application was conducted using dewatered municipal biosolids (DMB) applied at a rate of ∼ 8 Mt dw ha^− 1 in the summer of 2006. The DMB land application treatments consisted of direct injection (DI) of the DMB beneath the soil surface at a nominal depth of ∼ 0.11 m, and surface spreading (SS) plus subsequent tillage incorporation of DMB in the topsoil (∼ 0.10 m depth). The PPCPs examined included eight pharmaceuticals (acetaminophen, fluoxetine, ibuprofen, gemfibrozil, naproxen, carbamazepine, atenolol, sulfamethoxazole), the nicotine metabolite cotinine, and two antibacterial personal care products triclosan and triclocarban. Residues of naproxen, cotinine, atenolol and triclosan originating from the fall 2005 LMB application were detected in tile water nearly nine months after application (triclocarban was not measured in 2005). There were no significant differences (p > 0.05) in PPCP mass loads among the two DMB land application treatments (i.e., SS vs. DI); although, average PPCP mass loads late in the study season (> 100 days after application) were consistently higher for the DI treatment relative to the SS treatment. While the concentration of triclosan (∼ 14,000 ng g^− 1 dw) in DMB was about twice that of triclocarban (∼ 8000 ng g^− 1 dw), the average tile water concentrations for triclosan were much higher (43 ± 5 ng L^− 1) than they were for triclocarban (0.73 ± 0.14 ng L^− 1). Triclosan concentrations (maximum observed in 2006 ∼ 235 ng L^− 1) in tile water resulting from land applications may warrant attention from a toxicological perspective.     

Tuning and controlling photocatalytic performance of TiO2/kaolinite composite towards ciprofloxacin: Role of 0D/2D structural assembly

Lamellar kaolinite supported monodispersed TiO₂ was prepared through rational design and 0D/2D structural assembly, which showed significantly improved photocatalytic performance towards ciprofloxacin. After systematic evaluation, the pseudo-first-order kinetic constant rate of TiO₂/kaolinite composite can reach to 0.04549 min⁻¹, which was 6.90 and 1.81 times higher than that of pure TiO₂ and P25, respectively. The nano-TiO₂/kaolinite composite photocatalyst also displayed good reusability performance, only a slight decline occurred after four repeated experiments, which is beneficial for the large-scale application of photocatalysts. Various characterizations indicated that enhanced photocatalytic performance can be ascribed to the synergistic effect between natural kaolinite and the well distributed TiO₂, which enhanced the light absorption ability, assisted the dispersion of pure TiO₂, resulted in co-catalysis effect, improved the separation facilitation of photo-induced carriers and promoted the stronger adsorption capacity, etc. These merits effectively regulated the carriers’ lifetime and migration velocity of the photogenerated charge carriers. Considering the excellent properties of natural kaolinite (low cost, abundance, stability, etc.), our study provides a promising candidate for effective degradation of trace amounts of pharmaceutical and personal care product (PPCP) or contaminants with potential high-toxic risk.     

Behavior of pharmaceuticals, cosmetics and hormones in a sewage treatment plant

Two cosmetic ingredients (galaxolide, tonalide), eight pharmaceuticals (carbamazepine, diazepam, diclofenac, ibuprofen, naproxen, roxithromycin, sulfamethoxazole and iopromide) and three hormones (estrone, 17beta-estradiol and 17alpha-ethinylestradiol) have been surveyed along the different units of a municipal Sewage Treatment Plant (STP) in Galicia, NW Spain. Among all the substances considered, significant concentrations in the influent were only found for the two musks (galaxolide and tonalide), two anti-inflammatories (ibuprofen and naproxen), two natural estrogens (estrone, 17beta-estradiol), one antibiotic (sulfamethoxazole) and the X-ray contrast medium (iopromide), where the other compounds studied were below the limit of quantification. In the primary treatment, only the fragrances (30-50%) and 17beta-estradiol (20%) were partially removed. On the other hand, the aerobic treatment (activated sludges) caused an important reduction in all compounds detected, between 35% and 75%, with the exception of iopromide, which remained in the aqueous phase. The overall removal efficiencies within the STP ranged between 70-90% for the fragrances, 40-65% for the anti-inflammatories, around 65% for 17beta-estradiol and 60% for sulfamethoxazole. However, the concentration of estrone increased along the treatment due to the partial oxidation of 17beta-estradiol in the aeration tank.     

Evaluation of pharmaceuticals and personal care products (PPCPs) in drinking water originating from Lake Erie

This project evaluated pharmaceuticals and personal care products (PPCPs) concentrations in drinking water originating from Lake Erie. Raw and treated water samples were collected from the local water treatment plant in Erie, Pennsylvania over a 10 month period. Along with grab samples, long-term samples were collected using Polar Organic Chemical Integrative Samplers (POCIS). The samples were analyzed for 17 PPCPs (acetaminophen, ampicillin, atrazine, bisphenol-A, caffeine, carbamazepine, cimetidine, ciprofloxacin, digoxin, gemfibrozil, ibuprofen, metformin, naproxen, simazine, sulfamethoxazole, sulfathiazole, trimethoprim) in raw and treated drinking water. For grab samples, six of the 17 PPCPs were found at detectable levels in raw or treated drinking water including atrazine, bisphenol-A, caffeine, ibuprofen, metformin, and simazine. Detectable PPCP levels in treated water samples were usually lower than those in raw water. For long-term samples, an additional four PPCPs (ten total) were found at detectable levels including gemfibrozil, naproxen, sulfamethoxazole, and trimethoprim. Aqueous phase concentrations of PPCPs were estimated using sampling rates, deployment periods, and analytical results of POCIS samplers.     

Assessment of the anaerobic degradation of six active pharmaceutical ingredients

Research examined the anaerobic degradation of 17α-ethynylestradiol, acetaminophen, acetylsalicylic acid, ibuprofen, metoprolol tartrate, and progesterone by methanogenic bacteria. Using direct sample analysis and respirometric testing, anaerobic degradation was examined with (a) each compound as the sole organic carbon source and (b) each compound at a lower concentration (250 µg/L) and cellulose serving as the primary organic carbon source. The change in pharmaceutical concentration was determined following 7, 28, 56, and 112 days of anaerobic incubation at 37 °C. Only acetylsalicylic acid demonstrated significant degradation; the remaining compounds showed a mixture of degradation and abiotic removal mechanisms. Experimental results were compared with BIOWIN, an anaerobic degradation prediction model of the US Environmental Protection Agency. The BIOWIN model predicted anaerobic biodegradability of the compounds in the order: acetylsalicylic acid > metoprolol tartrate > ibuprofen > acetaminophen > 17α-ethinylestradiol > progesterone. This corresponded well with the experimental findings which found degradability in the order: acetylsalicylic acid > metoprolol tartrate > acetaminophen > ibuprofen.     

Pharmaceuticals, personal care products and endocrine-disrupting chemicals in U.S. surface and finished drinking waters: A proposed ranking system

This study developed a comprehensive ranking system, for the first time as per authors' knowledge, for prioritizing the monitoring of pharmaceuticals and personal care products and endocrine-disrupting chemicals (together termed as EOCs, hereafter; a total of 100 EOCs considered) in U.S. stream water/source water and finished drinking water (termed as “EOCRank,” hereafter). The EOCRank system was developed using a total of 4 criteria: (1) occurrence, (2) treatment in drinking water treatment plants, (3) ecological effects, and (4) health effects and characterized using 7 attributes: prevalence, frequency of detection, removal, bioaccumulation, ecotoxicity (for fish, daphnid, and algae aquatic indicator species), pregnancy effects, and health effects. The health effects attribute was characterized using 7 sub-attributes: carcinogenicity, mutagenicity, impairment of fertility, central nervous system acting, endocrine effects, immunotoxicity, and developmental effects. Rank scores of EOCs were calculated as summations of multiplications of importance weights and utility functions of multiple criteria and were arranged to highlight EOCs needing immediate attention. Two different ranking lists of EOCs were developed for U.S. finished drinking water and stream water/source water and observed to differ with each other, indicating the effect of water type on ranking of EOCs. A ranking list of priority EOCs, developed using a particular criterion, was observed to differ with that, developed using multiple criteria. Health effects and treatment criteria were observed to be important criteria influencing overall data gap rank scores and need further data collection. The generalized nature of the system could be customized for specific geographical locations (occurrence information and importance weights of different components). The developed database of the EOCRank system is available on: http://www.egr.msu.edu/~xagorara/research.html).     

新型醇醚羧酸盐对PPCP/PBAT复合膜的增塑效果研究

目的 比较不同质量分数新型绿色增塑剂醇醚羧酸盐(PPEC)对PPCP/PBAT复合膜的增塑效果。方法 采用实验室自制的PPEC，以PPCP与PBAT为基体材料，经双螺杆造粒后吹膜制备出PPCP/PBAT/PPEC复合膜，并对其进行微观形貌、热性能、光学性能、力学性能等多方面的表征。结果 复合膜截面由明显的海岛形貌与相分离界面逐渐变得光滑平整，红外图证明了PPCP与PBAT的存在，且伴随着游离态羟基向结成氢键的转变。复合膜的玻璃化转变温度逐渐降低，透光率呈上升趋势且雾度呈下降趋势，但变化幅度均不大，PPEC有效提高了PPCP与PBAT的界面相容性。复合膜断裂伸长率达到了520%，弹性模量降低到618 MPa，屈服强度降低到4.83 MPa。结论 PPCP/PBAT/PPEC复合膜具有良好的增塑效果，且PPEC的最佳掺量为2.0%。     

A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites

Carbon materials particularly in the form of sparkling diamonds have held mankind spellbound for centuries, and in its other forms, like coal and coke continue to serve mankind as a fuel material, like carbon black, carbon fibers, carbon nanofibers and carbon nanotubes meet requirements of reinforcing filler in several applications. All these various forms of carbon are possible because of the element's unique hybridization ability. Graphene (a single two-dimensional layer of carbon atoms bonded together in the hexagonal graphite lattice), the basic building block of graphite, is at the epicenter of present-day materials research because of its high values of Young's modulus, fracture strength, thermal conductivity, specific surface area and fascinating transport phenomena leading to its use in multifarious applications like energy storage materials, liquid crystal devices, mechanical resonators and polymer composites. In this review, we focus on graphite and describe its various modifications for use as modified fillers in polymer matrices for creating polymer-carbon nanocomposites.     

等离子体法在烟气脱硫中应用进展

从应用研究角度出发阐述了近年来等离子体技术在烟气脱硫领域中的研究趋向及应用成果,包括等离子体活化处理烟气机理、等离子体与催化剂协同作用进行烟道气脱硫的最新研究进展,并对等离子体脱硫反应机理和实验模型加以讨论,提出了利用等离子体法进行烟气脱硫应用研究中存在的问题及今后的研究方向.