GIS气体高压开关在阳煤五矿变电站的应用

针对阳煤五矿广场变电站的高压开关老化问题,为了保证安全性,采用了GIS气体的高压绝缘开关进行了改造。在改造后,变电站的安全性得到了显著提高,设备运行可以节省成本200多万元。     

The stress intensity factors for a short crack partially penetrating an inclusion of arbitrary shape

Some approximate solutions for predicting the stress intensity factor of a short crack penetrating an inclusion of arbitrary shape have been developed under mode I and mode II loading conditions. The derivation of the fundamental formula is based on the transformation toughening theory. The transformation strains in the inclusion are induced by the crack-tip field and remotely applied stresses, and approximately evaluated by the Eshelby equivalent inclusion theory. As validated by detailed finite element (FE) analyses, the developed solutions have good accuracy for different inclusion shape and for a wide range of modulus ratio between inclusion and matrix material.     

Residual stresses and transformation toughening in MoSi2 composites reinforced with partially stabilized zirconia

The results of study of the effects of yttria stabilization (0–6 mol.%) on the room-temperature fracture behavior and toughening mechanisms in zirconia-reinforced MoSi₂ are presented in this paper. Transformation toughening is shown to occur only in composites reinforced with zirconia particles stabilized with 2 mol.% yttria. However, the fracture toughness levels are comparable in the other composites with yttria levels between 0 and 6 mol.%. Toughening in the other composites is attributed to the combined effects of residual stress, microcrack shielding/anti-shielding and/or crack deflection. A rigorous micromechanics-based model is presented for the estimation of residual stress levels in brittle materials reinforced with phases that can transform during cooling or under stress. The model is applied successfully to the rationalization of the observed fracture and toughening phenomena.     

Genetically modified starter and protective cultures

Modern approaches towards starter and protective culture improvement rely on advances in molecular biology. For most microorganisms used for food production, gene technological methods have been well developed. By recombinant DNA technology, ‘tailor-made’ starter and protective cultures may be constructed so as to combine technically desirable features. A single strain which normally would fail to accomplish a given ‘wtask’ may now be improved so as to meet a set of requirements necessary for a specific production or preservation process (e.g. wholesomeness, no off-flavour production, overproduction of bacteriocins or particular enzymes). In addition, undesirable properties (e.g. mycotoxin or antibiotic production by cheese moulds) may be eliminated by techniques such as ‘gene disruption’.     

空间RSCR四杆机构图解综合法的研究

根据空间RSCR四杆机构出现特殊位置的几何特征,运用旋转变换把空间问题转换为平面问题,对实现两特殊位置运动的空间RSCR曲柄摇杆机构的图解综合法进行了探讨。     

Parameters affecting the frequencies of transformation and co-transformation with synthetic oligonucleotides in yeast.

Factors influencing the direct transformation of the yeast Saccharomyces cerevisiae with synthetic oligonucleotides were investigated by selecting for cyc1 transformants that contained at least partially functional iso-1-cytochrome c. Approximately 3 x 10(4) transformants, constituting 0.1% of the cells, were obtained by using 1 mg of oligonucleotide in the reaction mixture. Carrier, such as heterogeneous oligonucleotides, enhanced transformation frequencies. Transformation frequencies were dramatically reduced if the oligonucleotides had a large number of mismatches or had terminally located mismatches. Transformation with oligonucleotides, but not with linearized double-strand plasmid, was efficient in a rad52- strain, suggesting that the pathway for transformation with oligonucleotides is different from that with linearized double-strand plasmid. We describe a procedure of co-transformation with two oligonucleotides, one correcting the cyc1 defect of the target allele in the host strain, and the other producing a desired amino acid alteration elsewhere in the iso-1-cytochrome c molecule; approximately 20% of the transformants obtained by co-transformation contained these desired second alterations.     

小官庄铁矿主井计量装置改造

自制的计量装置投入使用后安全高效。介绍了其工作原理及其特点。并同以前的计量装置进行了比较。新装置不仅经济效益好，且社会效益显著，保障了矿山的正常生产。     

氧化锆增韧陶瓷的相变及相变增韧

本文阐述了氧化锆增韧陶瓷（ＺＴＣ）的相变增韧机理，并探讨了热处理工艺对ＺＴＣ的相变及显微组织的影响规律。     

外源有机磷在黄棕壤中的淋溶和转化特征

采用Bowman和Cole提出的有机磷分级体系,分3个灌水量对外源活性有机磷β-甘油磷酸钠在黄棕壤中的淋溶和转化特征进行了研究。结果表明,大于50mm的灌水量可以使β-甘油磷酸钠发生淋溶。施入黄棕壤中的β-甘油磷酸钠在24h内可以转化为速效磷和中活性有机磷,灌水量愈大,速效磷和中活性有机磷积累的土层也愈深。中稳性有机磷和高稳性有机磷含量没有明显变化。     

Nitrogen utilization and transformation in red soil fertilized with urea and ryegrass

The influence of fertilization with urea and ryegrass on nitrogen utilization and transformation in red soil has been studied by using ^15N tracer method.When urea and ryegrass were applied alone or in combination,the percentage of N uptaken by ryegrass from labelled urea was 3 and 1.7 times that from labelled ryegrass for the application rate of 200mgN.kg^-1 and 100mgN.kg^-1,respectively;combining application of ryegrass and ureareduced uptake of urea N and increased uptake of ryegrass N by ryegrass plant,but the percentage of N residued in soil increased for urea and decreased for ryegrass.when urea and ryegrass were applied alone,the percentage of N residued in soil from labelled ryegrass was more than 69% while that from labelled urea was less than 25%,and much more ryegrass N was incorporated into humus than urea N.