广州中信商城地下连续墙施工工艺

本文介绍了广州中信商城地下连续墙的施工工艺。该工艺采用膨润土制浆配制方式，施工质量高，效果好。     

基于OpenGL五轴联动数控仿真系统碰撞干涉检验实时仿真技术及算法研究

介绍了Com-5NCSS五轴联动数控仿真系统运用的“实时仿真”技术，在此基础上提出基于规则实体表面网格化遍历的八叉树单球组合模型，该模型应用于Com-5NCSS仿真系统中，实现了碰撞干涉的快速检测，满足了数控仿真系统的“实时性”要求。     

消光剂TiO_2悬浮液配制工艺优化

讨论了在配制过程中减少凝聚粒子形成的有效措施。分散系统由分散器和弱搅拌组成 ,悬浮液初始浓度为 5 0 % ,分散时间应在 0 .5h以上。莫诺泵最佳转速在 85r min左右 ,球磨后TiO2 大粒子通过离心机分离出去 ,使产品中的大于 10 μm的凝聚粒子数小于 0 .4个 mg。     

Mechanical properties and antibacterial activity of peroxide‐cured silicone rubber foams

Silicone rubber (SR) foams were prepared by the peroxide curing of a silicone compound with 2,4‐dichlorobenzoyl peroxide (DCBP), di‐t‐butyl peroxide (DTBP), or 2,5‐dimethyl‐2,5‐di(t‐butylperoxy) hexane (DBPH) in the presence of 2,2′‐azobisisobutyronitrile (AIBN) as a blowing agent. The cells were formed in the foam as a result of nitrogen produced by the decomposition of AIBN during the foaming process. The cell size, hardness, and tensile properties of the SR foams were examined as a function of the peroxide concentration. When the peroxide concentration increased, the hardness and tensile strength of the SR foams increased, whereas the cell size and elongation at break decreased. The antibacterial activity of the prepared foams was also evaluated via their effects on Staphylococcus aureus and Escherichia coli. The peroxide‐cured SR foams had antibacterial activity because a toxic residue was generated by the peroxide decomposition. The foam prepared by the AIBN/DCBP system showed more antibacterial activity than the AIBN/DBPH and AIBN/DTBP ones. However, after postcuring at 250°C for 2 h, the antibacterial activity of the SR foams significantly decreased. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Report on a new OED project: A study of the history of new words in the new OED

The study of the history of new words in theNewOED described in this paper was undertaken in 1986-87, and is based on the material then available. Since then, theNewOED has been finished, and PAT, the inquiry system developed at the University of Waterloo for the investigation of theNewOED data base, has been much altered and improved. Nevertheless, this report should prove useful in indicating the potentiality for analyzing the computerizedNewOED and some of the problems. This project is a study of the ways in which new words are created in English at various periods of time. A chronological dictionary 's created listing words introduced into the language over 50 year increments. These words are then classified by the processes used in forming them to show, in proportional terms, if certain processes are more common at some times than at others.H. M. Logan, Associate Professor, Department of English, University of Waterloo, Waterloo, Ontario, Canada, has written The Dialect of the Middle English Life of St. Katherine (Mouton, 1973), making use of the computer in a study of medieval dialectology. He has also written articles on computer stylistics and literary analysis inCHum, ALLC Journal, Language and Style, College Literature, and on the dictionary inDictionaries.     

聚酰胺66的复配阻燃研究

采用35％磷-溴-锑复配阻燃体系对聚酰胺66进行阻燃，极限氧指数可提高到33．6％，达到UL94-V0级(1．6mm)，且无熔融滴落。阻燃体系的添加会导致聚酰胺66力学性能的下降，但与无机阻燃体系相比较，磷-溴-锑复配阻燃体系对聚酰胺66的力学性能影响较小。采用扫描电镜观察阻燃剂在聚酰胺66中的分散效果，发现分散均匀的体系，在水中或者在110℃的析出实验条件下，阻燃剂的析出量很小，可以维持较长时间的阻燃效果。     

Improvement of polymer blend properties by changing sequence of mixing

The basic objective of this article is to improve the polymer blend properties by changing mixing sequence. Blending of two elastomers does not lead to a molecularly homogeneous blend (true solution), but to a heterogeneous system in which both polymer phases are present. In this article, the detailed study of heterogeneous distribution of carbon black as well as blend inhomogenity and the physicomechanical including dynamic mechanical properties of the blend has been carried out. The choice of the blend was natural rubber/polybutadiene rubber as 85:15. Heterogeneous carbon black distribution study was also performed in differential scanning calorimeter. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2735–2742, 2007     

耐热性橡胶配合技巧(上)

介绍了耐热橡胶的等级划分，各种橡胶的使用温度和性能特点，及13种橡胶（天然橡胶、聚氨酯橡胶、丁苯橡胶、顺丁橡胶、氯丁橡胶、丁腈橡胶、氯磺化聚乙烯橡胶、氯醚橡胶、丁基橡胶、乙丙橡胶、丙烯酸酯橡胶、氟橡胶、硅橡胶）的78个耐热配方实例，并对配方做了简要说明。所述配方可基本满足橡胶材料从A～I级9个耐热等级的不同要求。     

纳米蒙脱土/环氧树脂胶粘剂制备工艺优化选择

介绍了制备纳米蒙脱土/环氧树脂胶粘剂的方法,并通过正交试验的方法分析了固化时间、固化温度、搅拌时间、搅拌温度对纳米蒙脱土/环氧树脂胶粘涂层拉伸剪切强度的影响,给出了上述四个工艺参数的最佳工艺规范并通过试验验证了结论。     

白色纯聚酯粉末涂料的性能研究

简要介绍了粉末涂料的特点 ,并从涂膜性能的优化角度论述了粉末涂料原料的选择和使用情况。从羧基聚酯树脂 -TGIC体系纯聚酯粉末涂料配方设计入手 ,研究了基料、填料、助剂对其涂膜性能 (主要物理机械性能 :涂膜之耐冲击力、柔韧性、倾斜流动性、硬度、附着力、抗UV老化等 )的影响 ,得到了一个在给出原料中涂膜综合性能最好的配比