Liner services network design and fleet deployment with empty container repositioning

Transportation demand of shipping container fluctuates due to the seasonality of international trade, thus, every 3–6 months, the liner company has to alter its current liner shipping service network, redeploy ships and design cargo routes with the objective of minimizing the total cost. To solve the problem, the paper presents a mixed integer linear program model. The proposed model incorporates several relevant constraints, such as weekly frequency, the transshipment of cargo between two or more service routes, and transport time. Extensive numerical experiments based on realistic date of Asia–Europe–Oceania shipping operations show that the proposed model can solve real-case problems efficiently by CPLEX. The results demonstrate that the model can reduce ship’s capacity consumption and raise ships’ capacity utilization.     

Synthesis,structure, CO oxidation,and H2 production activities of CaCu3−xMnxTi4−xMnxO12 (x = 0, 0.5, and 1.0)

Synthesis of nanocrystalline pristine and Mn-doped calcium copper titanate quadruple perovskites, CaCu_3?xMn_xTi_4?xMn_xO₁₂ (x = 0, 0.5, and 1.0) by modified citrate solution combustion method has been reported. Powder X-ray diffraction patterns attest the phase purity of the perovskite materials. Average particle sizes of all the materials obtained from the Scherrer's formula are in the range of 55–70 nm. The specific surface areas for all the perovskites obtained from BET isotherms are found to be low as expected for the condensed oxide systems and fall in the range of 13–17 m² g^?1. Transmission electron microscopy studies show a reduction in particle size of CaCu₃Ti₄O₁₂ with increase in Mn doping. Ca and Ti are present in +2 and +4 oxidation states in all the materials as demonstrated by X-ray photoelectron spectroscopy analyses. Cu²⁺ gets reduced in CaCu₃Ti₄O₁₂ with higher Mn content. Mn is observed to be present only in +3 oxidation state. All the materials have been examined to be active in CO oxidation as well as H₂ production from methanol steam reforming. CaCu₃Ti₄O₁₂ with ~14 at.% Mn is found to show best catalytic activities among these materials. A comprehensive analysis of the catalytic activities of these perovskites toward CO oxidation and H₂ production from MSR reveal the cooperative activity of copper-manganese in the doped perovskites and it is more effective at lower manganese content.     

协同作战能力简析

协同作战能力(CEC)是一种充分利用网络技术的新型海岸防空技术，给系统的作战能力带来了革命性的交破。本文对协同作战能力的产生、功能、组成以及未来的发展趋势作了详细的介绍，阐述了CEC系统的总体设计思想。在此基础上，将CEC系统与传统的作战系统的性能和设计思想在各方面进行了比较，交出了CEC系统各方面的优越性能。协同作战能力是现代和未来作战系统的发展方向，CEC系统的发展必将成为衡量各国国防科技现代化的重要指标。     

David W. Johnson: Award for Distinguished Contributions of Applications of Psychology to Education and Training.

Provides the biography of David W. Johnson and announces that he has won the Award for Distinguished Contributions of Applications of Psychology to Education and Training for programmatic research, comprehensive research reviews, and revision of theory over four decades of persistence that have provided the knowledge foundation for cooperative learning, constructive controversy, conflict resolution, and peer mediation training. A selected bibliography is also provided. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Alleviating convergence problems in Group Support Systems

Not all Group Support Systems are identical, as is demonstrated by their software implementations. We discuss two existing implementations of group support tools and the process models underlying them. We demonstrate that fundamental to both processes is the merging or integration of individual data. Based on this and other empirical research, the Shared Context Model (SCM) of cooperative work is adopted and we show that it supports existing processes and others. We expect that groups will find merging their work easier with the SCM. This model is presented and embedded in the architecture and implementation of four group tools. Because these tools are destined to be used by dispersed groups, synchronously or asynchronously, an object-based communication and control mechanism is incorporated. Finally, as graphics and multi-tasking have been shown to be increasingly important, the tools are implemented in Microsoft Windows for personal computers attached to local area networks.     

不锈钢管子—管板的激光焊接

试验研究了不锈钢的深溶焊接。研究了聚焦光束回转的光具。在工件不动的情况下,焊接管子—管板连接环缝。焊缝质量满足压力容器的要求,焊接效率大大提高。     

Case Study of an Aerosol Explosion and a Method to Determine Explosion Temperatures

A failure analysis case study is presented for a two-piece aerosol containing tetrafluoroethane, commonly referred to as Refrigerant 134a. A gentleman was preparing to recharge the air conditioning system of an automobile when the bottom exploded off the aerosol container, propelling the body of the aerosol container like a rocket, which hit the man in the eye and blinded him in that eye. The aerosol was never connected to the air conditioner, therefore backpressure from the air conditioner (AC) compressor was ruled out as a cause for the explosion. The objective of the study was to determine why the aerosol exploded. Several recently developed test methods were used, including two types of heat-to-burst tests and a puncture chamber to measure the pressure-versus-temperature behavior of aerosols. More common test methods were also used, such as water bath pressure tests, hydro pressure burst tests, pneumatic pressure burst tests, hardness measurements, weight measurements, metallography, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and an accident scenario recreation. A semi-empirical correlation between the hardness and weights of the container bottoms was used to determine the explosion temperature and/or pressure. This semi-empirical correlation agrees in principle with an analysis of the explosion pressures using finite-element analysis (FEA). The root cause for the explosion was determined to be a lack of strength of the bottom of the two-piece aerosol coupled with heating the aerosol to temperatures significantly above room temperature.     

水溶液辐射分解产物对金属材料腐蚀的影响

实验研究了水辐射分解作用对高放废物深地质处置容器材料的影响。在高放废物深地质处置库附近的地下水,受辐射线作用后分解出氧、氢和氧化产物(例如H_2O_2等),于是在高放废物容器周围形成一个氧化场,导致高放废物中的某些重要放射性核素(例如U,Np和Tc)易溶于水,并向远域迁移。本实验中的含FeSO_4(0.13 mol/L)水溶液在吸收剂量为0、20、60、180、500kGy的射线作用下,其氧化还原电位(Eh)值由+357mV增至+414 mV;在不同吸收剂量的射线作用下,金属Cu、金属Al、0.357 mv金属Fe和不锈钢(后者是我国拟采用的高放废物包装容器材料),在水溶液中的氧化侵蚀强度,分别比在无辐射情况下的大0.2-6.1倍。     

焦化生产中含硫容器自燃氧化倾向性分析

分析了炼焦化工生产过程中硫的分布和存在形态、硫铁化合物自燃的影响因素,提出了防止储罐、管道等设备自燃事故的安全控制方法.     

Restoration of small lakes through cooperative management: A suitable strategy for poverty‐laden areas in developing countries?

Lake Rupa is a small, subtropical, shallow lake with a surface area of 100 ha situated 600 m a.s.l. in Central Himalaya, Nepal. This degraded lake was studied between 2000 and 2006, with the goal of determining whether or not it could be restored by a community‐based cooperative of local people living in its catchment. Main threats to the lake, its aquatic life and its very existence include encroachment by excessive aquatic vegetation, sedimentation, and low in‐lake concentrations of dissolved oxygen (DO). Small lakes (≤ 500 ha) are relatively prone to the process of ‘succession and climax’, although they also can be of social, environmental and ecological importance. Thus, their disappearance could spark social chaos and disorder in areas already having to cope with other rapid environmental changes. This means that credible mechanisms for revitalizing or protecting small lakes are an important goal. Accordingly, a lake cooperative of 329 households living in close vicinity to Lake Rupa was formed in 2002, by prioritizing traditional fishers, women and other deprived community members with the goals of respecting the citizenry and equity. Following the cooperative's campaigns directed at weed removal and fish stocking, encroachment of vegetation on the lake margins was halted, its aquatic weeds became under control, and its fisheries improved. In addition to the cooperative's restoration activities, several water quality parameters, including water transparency and DO and chlorophyll‐a concentrations, were monitored on a monthly basis. The measured water transparency was inconsistent, exhibiting large variations between 2000 and 2003. Relatively low, but consistent, values, however, were measured after 2004. The results imply that the removal of weeds, and sufficient nutrients and solar radiation are subsequently available to the lake's phytoplankton communities. Supporting this notion is that the chlorophyll‐a concentration spiked to 205 µg L⁻¹ in November 2006, the water transparency became consistent, and the DO concentration increased to >3.8 mg L⁻¹ during the critical months (March–May) after 2004. These water quality indicators indicated improvement in the degraded Lake Rupa, suggesting that the establishment of cooperatives such as that highlighted in this study could be a powerful and sustainable mechanism for restoring degraded lakes in similar socioeconomic settings by maintaining equity, by connecting communities with their resources, and by facilitating integrity, equity, citizenry and social justice.