亲水性PET共混材料的制备及性能研究

以机械共混法制备亲水性聚对苯二甲酸乙二醇酯（PET）共混材料，并通过接触角测定仪、差示扫描量热仪(DSC)和电子万能材料试验机等对共混材料的亲水性能、热性能和力学性能等进行研究与分析。结果表明，亲水处理剂聚乙二醇（PEG）、聚丙烯酸钠（PAAS）、聚乙烯吡咯烷酮（PVP）均能改善PET的亲水性能，影响PET的结晶性能，但亲水处理剂对PET的力学性能影响较小，其中PET/PEG共混材料的亲水性最优；随着PEG含量的增加，PET/PEG共混材料的亲水性先逐渐增强，当PEG含量高于5 %后，共混材料的亲水性变化很小；且PET的结晶度随着PEG的加入呈现先增大后减小的趋势。     

Bilayer-mediated assembly of cationic nanoparticles adsorbed to lipid bilayers: Insights from molecular simulations

Understanding interactions between functionalized gold nanoparticles (NPs) and lipid bilayers is essential for biomedical applications. Experiments have shown that NPs that are stable in solution can assemble into clusters when adsorbed to a lipid bilayer, suggesting that bilayer-mediated interactions facilitate assembly. In this work, we use coarse-grained molecular dynamics simulations to study bilayer-mediated interactions between NPs adsorbed to single- and multicomponent lipid bilayers. We perform unbiased simulations and umbrella sampling calculations using an implicit solvent force field to determine the thermodynamic contributions to assembly. We show that bilayer-mediated interactions drive the assembly of NPs into linear aggregates on liquid-disordered bilayers, which we attribute to a reduction in bilayer curvature. Similar bilayer-mediated interactions induce the alignment of NP clusters with phase boundaries in phase-separated bilayers. Together, these simulation results provide new physical insight into the balance of forces that dictate the assembly of charged NPs at multicomponent lipid bilayer interfaces.     

Preparation of micrometer‐sized,monodisperse, magnetic polymer particles

Micrometer‐sized, monodisperse, magnetic composite particles were prepared by heating micrometer‐sized, monodisperse, hollow polystyrene/polydivinylbenzene composite polymer particles at 200°C for 4 h (particles had been dipped in pentacarbonyliron) and then washed in 12 N HCl and water. The hollow polymer particles were produced by seeded polymerization by the dynamic swelling method that was proposed by authors. The magnetic composite particles contained Fe₃O₄, the content of which was 49% based on total weight, and were attracted easily in water by a 1650 G magnet. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 428–433, 2003     

Preparation,structural elucidation,molecular weight determination,and molecular recognition of first‐ and second‐tier dendrimer molecules

1,3,5‐Triglyceratetriazine [first tier (G₁)] and tri(1,3,5‐triglycerate) triazine [second tier (G₂)] dendrimers were prepared with 1,3,5‐trichlorotriazine and sodium glycerate in a 1 : 3 mass ratio in an ethanolic medium.G₁ and G₂ were amorphous, white, solid substances. Their structures were elucidated with IR, ¹H‐NMR, and ¹³C‐NMR, and their thermal stability was studied with thermogravimetric analysis. The activation energy was calculated with the Freeman–Carroll model. Densities, viscosities, and surface tensions for 0.01–0.08 mol/kg aqueous solutions increased at 0.01 mol/kg for sodium glycerate, 1,3,5‐trichlorotriazine, 1,3,5‐triazine triglycerate chloride, G₁, and G₂. These values were measured at 298.15 K. The apparent molal volume, reduced viscosity, and inherent viscosity were calculated from the densities and viscosities, respectively. The data were regressed for the limiting densities, limiting apparent molal volumes, intrinsic viscosities, limiting inherent viscosities, and limiting surface tensions for solute–solvent interactions. The positive limiting apparent molal volume values were noted in the order of G₂ > 1,3,5‐triazine triglycerate chloride > G₁ > 1,3,5‐trichlorotriazine > sodium glycerate, with weaker hydrophilic intermolecular interactions of G₂. The higher intrinsic viscosity and limiting inherent viscosity values for G₂ implied stronger G₂–H₂O hydrophilic interactions, and the higher limiting apparent molal volume of G₂ indicated slightly higher dynamic conformational changes in comparison with G₁, with stronger structural activities. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

血液过滤用熔喷PBT非织造布紫外辐照接枝改性研究

研究了血液过滤用熔喷PBT非织造布的紫外辐照气相接枝改性方法。通过实验选择了丙烯酸(AAc)为接枝单体 ,探讨光照时间、预辐照时间、单体温度、引发剂浓度、氮气压力对接枝率和表面润湿张力的影响 ,结果得到最佳的紫外辐照接枝条件为 :室温下 ,光距 2 0cm ,预浸 10min ,二苯甲酮 (BP) 0 .0 37mol/L ,冲入单体的氮气流量 87.5h/L ,反应时间 30min。PBT非织造布AAc紫外辐照接枝后表面润湿张力可以达到 85mN/m左右 ,且表面润湿张力随接枝率的提高而增加     

Continuous emulsion polymerization of vinyl acetate. II Operation in a single Couette–Taylor vortex flow reactor using sodium lauryl sulfate as emulsifier

Continuous emulsion polymerizations of vinyl acetate were conducted at 50°C in a single continuous Couette–Taylor vortex flow reactor (CCTVFR) using sodium lauryl sulfate as emulsifier and potassium persulfate as initiator. The polymerization can be carried out very smoothly and stably, but the steady‐state monomer conversion attained in a CCTVFR is not as high as that in a plug flow reactor (PFR), but only slightly higher than that in a continuous stirred tank reactor (CSTR), even if the Taylor number is adjusted to an optimum value. Also, the effects of operating variables, such as the emulsifier, initiator, and monomer concentrations in the feed and the mean residence time on the kinetic behaviors were almost the same as those observed in a CSTR. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2755–2762, 2002     

Effect of the nature and degree of crosslinking on the Rose Bengal uptake by DVB‐, NNMBA‐, HDODA‐, and TTEGDA‐crosslinked aminopolyacrylamides

Polyacrylamides with 2–20 mol % divinyl benzene (DVB), N,N′‐methylene‐bisacrylamide (NNMBA), 1,6‐hexanediol diacrylate (HDODA), and tetraethyleneglycol diacrylate (TTEGDA) crosslinking and without crosslinking were prepared by free radical solution polymerization. Amino functions were incorporated into these polymers by transamidation with excess ethylenediamine. The dye uptake of nonprotonated and protonated aminopolyacrylamides was followed by batch equilibration method towards Rose Bengal (RB), Methyl Orange (MO), Methyl Red (MR), and Methylene Blue (MB). RB uptake by the polyacrylamide‐supported systems is higher than other dyes. Generally the dye uptake by the protonated systems is higher than the nonprotonated systems. To optimize the conditions of dye uptake, the effect of the concentration of RB solutions, temperature, and pH were followed. Kinetic studies showed that the uptake of RB by both nonprotonated and protonated crosslinked aminopolyacrylamides is a phase boundary process followed by three‐dimensional diffusion. The extent of RB uptake by the various systems depends on the nature and degree of crosslinking, and the relative rigidity/flexibility ofthe polyacrylamide support. Thus, the dye uptake followed the order: linear > NNMBA‐ > DVB‐ > TTEGDA‐ > HDODA‐crosslinked system. The dye uptake followed the same trend as the variation of amino capacity with degree of crosslinking in the respective crosslinked system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

混合催化剂合成水性环氧丙烯酸酯的研究

通过环氧丙烯酸树脂和双羟基化合物反应,获得具有亲水性链段的水性环氧丙烯酸酯。研究了催化剂用量和反应温度对转化率的影响,确定了以混合催化剂的最佳反应条件。采用FT-IR红外光谱对所合成的数值进行了表征,实验结果表明可以获得目的产物。     

地下水多孔介质中胶体与污染物协同运移规律研究进展

在总结国内外地下水中污染物运移规律研究的基础上,阐述了地下水多孔介质中胶体与污染物协同运移的研究进展。讨论了胶体运移的基本过程、相关机理,探究污染物-胶体-微生物(生物胶体)协同运移的作用方式、影响因素、实验分析、模型构造,并指出该领域目前研究存在的主要问题,以及对该领域研究趋势的展望。