在二(2-乙基己基)磷酸钠的微乳液中金属萃合物对水增溶的影响

测算了由二（2－乙基己基）磷酸钠，金属盐（CoSO4,NiSO4,ZnSO4,MgCl2或Cr(NO3)3)水溶液，正辛醇和正辛烷组成的微乳液中正辛醇从连续油相到界面的ΔGo→i^o和水的极限增容量φ'H2O。用金属萃取络合物反胶束的形成及其亲油性解释了金属离子对φ'H2O和ΔGo→i^o的影响。     

Preparation of BaMgAl10O17∶Eu2+ and Its Phase Behavior in Microemulsion System

BaMgAl10O17∶Eu2 (BAM) was prepared in the microemulsion system and its phase behavior was studied. There exists a small region in the reverse microemulsion system where the dispersed particles are of spherical form. In this way, BAM blue phosphor with good dispersion can be synthesized. The microemulsion phase diagrams of the pseudo-ternary system (Triton X-100/cosurfactant-oil-BAM brine) were first established intuitively by the dilution method. The microstructure of microemulsions was determined through eyeballing, conductance technique, and polar optical microscopy. Its phase behavior is affected by various factors, such as temperature (room temperature, 30, 40 ℃), oil, surfactants, and cosurfactants in microemulsions. According to the phase diagrams, the microemulsion system of Triton X-100/1-hexanol-hexane-BAM brine was chosen to prepare the precursor. The BAM phosphor can be obtained via sintering the precursor at a comparatively low temperature. The phosphors were characterized by XRD and vacuum ultraviolet (VUV) spectra.     

硫化锌纳米粒子的微乳液合成

介绍了微乳液制备纳米粒子的基本原理。对影响微乳液体系形成的主要因素如油相、水相、表面活性剂种类及用量等进行了研究，以表面活性剂TWEEN80和SPAN80作乳化剂，通过调整其比例控制乳化剂的HLB值，制备了乳化剂浓度为0.3mol/L、水/乳化剂比为6：1的W/O型庚烷/ST80/水微乳液体系。在此微乳液中制备了ZnS纳米粒子，采用TEM和XRD对超细样品的结构进行表征，表明得到的样品为β型立方晶系ZnS粒子、粒子粒径10-30nm。     

新型阳离子聚丙烯酰胺微粒的研究 Ⅱ.含PEO支链阳离子聚丙烯酰胺微粒的絮凝性能

以丙烯酰胺、丙烯酰氧基乙基三甲基氯化铵、聚氧乙烯大单体和N ,N’ -亚甲基双丙烯酰胺为单体 ,进行四元反相微乳液共聚合 ,制备出新型含PEO支链的阳离子微粒絮凝剂。然后用该微粒絮凝剂分别对针叶木纸浆和特种纸白水进行了助留和絮凝性能的研究 ,结果表明 ,本新型微粒具有能单独使用、絮凝效果好和抗剪切性强等优点。     

新型阳离子聚丙烯酰胺微粒的研究--含PEO支链阳离子聚丙烯酰胺微粒的合成、助留性能及作用机理

本文采用反相微乳液聚合的方法合成了丙烯酰胺(AM)/丙烯酰氧基乙基三甲基氯化铵(AD-AMQUAT)/聚氧乙烯大单体(PEO-A)/N,N'-亚甲基双丙烯酰胺(Bis)的四元共聚物微粒.研究了该微粒助留剂的结构与性能.这种微粒和纸纤维能够通过离子键和氢键作用显著地增强助留效果.     

Negative effect of [bmim][PF6] on the catalytic activity of alcohol dehydrogenase: mechanism and prevention

BACKGROUND: [bmim][PF₆] is a hydrophobic ionic liquid which could be considered as an environmentally friendly solvent for biocatalysis. In pure [bmim][PF₆], however, alcohol dehydrogenase from yeast (YADH) has no catalytic activity. The aim of the present work was (1) to quantitatively study the negative effect of [bmim][PF₆] on the catalytic activity of YADH and the related mechanism and (2) to made an attempt to lessen the negative effect of [bmim][PF₆] on YADH by microemulsifying [bmim][PF₆]. RESULTS: The activity of YADH in the homogeneous solution formed by H₂O, CH₃CH₂OH and [bmim][PF₆] decreased rapidly with the increase of the molar fraction of [bmim][PF₆]. The inhibitory effect of [bmim][PF₆] on YADH was probably caused by the competition of the imidazole group of [bmim][PF₆] with the coenzyme NAD⁺ for the binding sites on YADH. In a water‐in‐[bmim][PF₆] microemulsion, YADH was catalytically active due to the formation of the interfacial membrane of the nonionic surfactant TritonX‐100, which separated YADH from [bmim][PF₆] and avoided the direct inactivation of [bmim][PF₆] on YADH. Under optimal conditions, the activity of YADH was as high as 51 µmol L^?1 min^?1. CONCLUSION: [bmim][PF₆] was an inhibitor of YADH and its negative effect on YADH could be lessened by its microemulsification. Copyright © 2008 Society of Chemical Industry     

润滑油金属清净剂合成机理的剖析

结合润滑油清净剂合成机理以及微反应器理论的研究成果，认为清净剂合成中的过碱化反应机理与微反应器理论中渗透反应模型所描述的反应机理相一致。过碱化过程是利用有机酸生成的有机盐将水、促进剂、金属氢氧化物包裹起来形成反相胶束微粒（微反应器），二氧化碳通过渗透进入反相胶束微粒与金属氢氧化物反应得到纳米金属碳酸盐粒子的过程。利用微反应器理论对过碱化反应中各种因素的影响结果进行了分析，结果表明，清净剂过碱化反应过程中的现象可通过微反应器理论得到合理的解释。     

丙烯酰胺-二甲基二烯丙基氯化铵反相微乳液体系的制备及表征

采用石油醚为连续相、失水山梨糖醇酐单油酸酯(Span80)和聚氧乙烯失水山梨醇单硬脂酸酯(Tween80)为复合乳化剂、正己醇为助乳化剂,建立了丙烯酰胺(AM)和二甲基二烯丙基氯化铵(DMDAAC)反相微乳液体系。使用Zeta电位/粒度/相对分子质量分析仪对该体系的形成及聚合过程中乳胶粒子粒径及其分布进行了测试。实验结果表明,当体系达到微乳液状态时,体系主要由10~100nm的单体微珠及少量粒径小于10nm的胶束组成;随聚合过程的进行,胶束消失,乳胶粒子体积增大。乳胶粒子体积的增大主要是通过扩散和碰撞两种机理完成的。最佳的复合乳化剂亲水-亲油平衡值为8.045,复合乳化剂在油相中的质量分数为33%,助乳化剂在油相中的质量分数为1.6%。在此条件下达到微乳液状态时的水相增容体积最大。     

仿生黏附性聚多巴胺丁香酚抑菌微胶囊的制备

以丁香酚（EO）为芯材,多巴胺（DA）为壳材,通过乳液模板-界面聚合法成功制备出尺寸可控的聚多巴胺丁香酚（PDA@EO）微胶囊。通过FTIR、TG、UV-Vis、SEM和TEM对微胶囊的化学结构、形貌、粒径及性能进行表征和分析,结果表明,所制备的微胶囊呈规整球形,粒径在55～94 nm之间,丁香酚包封率为25.35%,包封量为0.6288 g/g,24 h时累积释放率达到68.39%。通过对比实验证明,PDA@EO微胶囊在不同材料表面均具有优异的黏附性能;作用于口腔感染部位常见细菌金黄色葡萄球菌和大肠杆菌24 h,PDA@EO微胶囊较游离丁香酚的抑菌活性分别提高了36.84%和35.52%;当微胶囊质量浓度达到2.0 g/L时,PDA@EO微胶囊对两种细菌的抑菌活性均达到99%以上。     

微乳液泡沫驱油技术原理、挑战和研究进展

微乳液驱和泡沫驱是强化采油领域中的两个重要技术。前者利用表面活性剂形成油-水微乳液提高增溶能力,降低油水界面张力和毛细管阻力,从而提高驱替效率和微观采收率;后者利用泡沫剂将气体稳定地分散在水相中,在油藏孔隙中形成泡沫,封堵优势通道和已驱替区域,从而扩大波及体积并提高宏观采收率。通过综述两个技术的国内外发展历史和研究进展,阐明了其优势和局限性。近年来提出的微乳液泡沫驱油技术,又称为低张力泡沫驱,其既可以保留两个独立技术的优势,又可以克服他们的缺点,最终同时提高微观和宏观采收率。但是在实际研究中,微乳液泡沫驱技术却面临理论和应用上的双重挑战。通过调查国内外相关研究进展,详细阐述了微乳液泡沫驱技术目前面临的挑战、研发思路和研究建议。