Mechanism of smoke suppression by melamine in rigid polyurethane foam

The smoke suppression of rigid polyurethane foam (RPUF) modified by melamine was investigated based on three sections: the condensed phase, the carbon layer, and the gas phase. In the condensed phase, the results of thermogravimetry, X‐ray photoelectron spectroscopy (XPS) N1S spectrum, and Fourier transform infrared spectroscopy indicated that melamine could suppress the degradation of RPUF by reacting with the aromatic hydrocarbons. It also reduced the smoke generation because the volatilizable aromatic hydrocarbons were the principal smoke precursors in a fire. In the carbon layer, the decrease from 38.50% to 24.76% of the inner layer oxygen content identified by XPS full‐spectrum and C1S spectrum indicated that melamine could prevent oxygen from transferring into the inner foam by the formation of an enhanced surface carbon layer, and the enhanced carbon layer could also block the release of smoke precursors. In the gas phase, the content of total aromatic hydrocarbons declined to 59.12% according to pyrolysis gaseous chromatography mass spectroscopy and indicated that melamine could reduce the smoke precursors. The results of smoke density chamber and cone calorimeter tests revealed that the addition of the melamine could decrease the smoke density of burning RPUF. Copyright © 2014 John Wiley & Sons, Ltd.     

Indoor Air Quality: Exploring Policy Options to Reduce Human Exposures

Deciding between the different policy approaches available for reducing human exposures to indoor pollutants is an exceptionally complex task. These options can range from waiting until more definitive information is available to enacting regulatory standards, with many variations in between. This paper presents some of the factors policy-makers must consider in establishing indoor air quality policies, and the role researchers should play in ensuring that indoor air policies are based on the best available scientific information.     

暖通空调工程设计常见问题

通过对施工图审查工作进行总结，指出了暖通空调和防火防排烟设计中存在的问题及防火规范本身的一些不足。     

55t/h锅炉技术改造成功经验

介绍了35t／h锅炉扩容改造为55t／h非标锅炉的技术成功经验。从增加锅炉的容积、受热面面积、燃烧器喷嘴改造三个方面介绍了对锅炉本体的改造，改造后实现了锅炉的水位、汽温及燃烧自动调节，提高了锅炉的热效率为以后的锅炉扩容改造提供了实践经验。     

钼酸盐阻燃抑烟剂研发现状

简要地叙述了钼酸盐类阻燃抑烟剂 ,如八钼酸铵、钼酸锌、钼酸钙、钼酸钴和三氧化钼等阻燃抑烟剂的研发现状     

抗红外成像制导技术浅析

红外成像制导导弹自诞生以来 ,经过数十年的发展 ,技术日臻完善 ,应用日趋广泛 ,研究和探讨对抗红外成像制导的技术和方法就显得尤为重要。介绍了红外成像制导的基本原理、发展和在战争中的重要作用 ,重点探讨了对抗红外成像制导的几种技术手段。     

锻钢退火炉消烟除尘技术改造

介绍了锡钢集团公司锻压分厂车底式热处理退火炉消烟除尘综合治理改造情况。包括烧嘴重新选型、配置，增设空气预热器及重油加热系统，并将下排烟改为地上排烟。改造的主要目的是消烟除尘，提高产品退火质量，提高炉子装备水平及节省燃油消耗。改造后运行结果基本达到了预定目标。     

制丝线FT651型叶片垂直分片机控制系统的改进方案

针对叶片垂直分片机使用过程中出现的劈坏烟箱、纵向移动刀架失控和系统无报警功能等问题,分析故障产生的原因,并对其控制系统进行改进。     

基于北斗卫星的森林火灾监控终端设计

针对传统森林火灾监控方式存在的受地形限制,导致火灾发现不及时和定位难的缺陷,设计了基于北斗卫星的森林火灾监控系统,实现了火灾智能识别和预警,并且可以对火源、火场进行快速定位和信息通报;终端包括烟采集处理模块、图像采集模块、DSP处理模块、ARM主控模块和北斗卫星通信模块五部分,从烟和火焰两个方面对森林实时进行监控,分别采用离子烟雾传感器和DSP火焰识别混合算法,提取火焰图像差值和火焰图像边界参数的方法,提高了识别的准确率;试验证明,系统具有结构简单、使用方便和识别智能化的特点。     

Simulation of smoke flow and longitudinal ventilation in tunnel fire

1 Introduction The tunnel is one of the important facilities of railroad and highway transportation, and also a throat of railroad and highway. With the development of transportation, there are more and more tunnels. Although the tunnel fire occurs seldo…