PIXE study on recovery of making-technology of Chinese Longquan celadon made in the Southern Song Dynasty (1127–1279 CE)

Proton induced X-ray emission (PIXE) technique and factor analysis were used to study the recovery of making-technology of Chinese Longquan celadon made in the late Southern Song Dynasty (1127–1279 CE). Based on factor analysis, for the raw material for body and the recipe for glaze, there is a close but slightly different relationship between these Longquan celadons unearthed from the core area of Dayao and the non-core area, despite all the Longquan celadons belong to the high-calcium-glaze system. The chemical compositions of most of the tentative body and glaze samples are very close to those of Longquan celadons unearthed from the core area of Dayao and the non-core area. This study can provide a guidance for recovery of making-technology of Longquan celandon.     

SnO2纳米材料气敏性能的研究进展

近年来,金属氧化物半导体气敏传感器已经广泛地应用于人们的日常生活中,并成为传感器领域的重要分支。其中,SnO_2是最早被研究的一类气敏材料,属于典型的n型半导体金属氧化物,具有制备简单、成本低廉、性质稳定等优点。主要介绍了SnO_2纳米材料气敏性能的研究进展,详细描述了该材料的气敏机理、改性手段,并对其实用化的前景进行了展望。     

A novel bio‐based phthalonitrile resin derived from catechin: synthesis and comparison of curing behavior with petroleum‐based counterpart

The development of bio‐based thermosetting resins with good thermal stability can potentially afford sustainable polymers as replacements for petroleum‐based polymers. We report a practical route to a novel catechin‐based phthalonitrile resin precursor (CA‐Ph), which contains free phenolic hydroxyl groups that result in ‘self‐curing’ at elevated temperatures to afford a thermostable polymer. Comparison of the performance of this CA‐Ph resin with that of a conventional petroleum‐based bisphenol A phthalonitrile resin (BPA‐Ph; containing 5 wt% of the curing agent 4,4′‐diaminodiphenylsulfone) revealed that CA‐Ph exhibits a lower melting point and curing temperature. Cured CA‐Ph resin retains 95% of its weight at 520 °C under a nitrogen atmosphere, which compares favorably with results obtained for BPA‐Ph resin that retains 95% of its weight at a lower temperature of 484 °C. Kinetic results indicated that the curing reactions of both CA‐Ph and BPA‐Ph systems follow an autocatalytic mechanism. These results suggest that catechin is a useful bio‐based feedstock for the preparation of self‐curing and thermally stable phthalonitrile resins for advanced technological applications. © 2017 Society of Chemical Industry     

内插法在相关干涉仪测向体制中的应用

测向误差的减小一直以来都是无线电测向精度提高的一个难点,对于不同的测向体制所采用的减小测向误差的方法都不尽相同。本文主要介绍的是相关干涉仪测向体制的基本原理以及通过内插法的应用来减小测向误差的方法。     

Design and optimization of ceramic membrane structure: From the perspective of flux matching between support and membrane

The support flux was first investigated as a separate influencing factor for its effect on performances of ceramic filtration membranes. Three pre-membranes were prepared by tape-casting and then transfer-coated to supports to form dual-layer ceramic membranes after sintering. Experiments demonstrated that membrane layers with almost the same properties were obtained despite the huge difference in support flux. When the support flux increases from 3.120 to 97.53 m³m^?2h^?1, the flux of these three membrane series have increased by 75%, 186% and 228%, respectively. Experimental rules can provide structural design and evaluation from the perspective of permeability. The limit membrane flux of a certain system was derived according to the resistance distribution law of internal membrane structure and the Darcy's theorem. On this basis, a method for designing support flux was proposed. Furthermore, we present a criterion to quickly and easily evaluate the match between the support and the top layer, which is the ratio of membrane resistance to total resistance. Finally, the filtration resistance of penetration caused by suction of membrane particles into the support was measured for the first time, taking the advantage of the transfer-coating method that inherently free of penetration. Our works are expected to deepen the understanding of the ceramic membrane structure and provided guidance for its rational design and optimization.     

基于子系统的非线性时变系统辨识方法

针对非线性时变系统提出一种基于子系统的辨识方法，用于时变多自由度（multiple degree-of-freedom，简称MDOF）系统中非线性的定位和估计，并且无需关于系统的先验知识。所提出的新方法提供一个连续时间模型，MDOF系统按照自由度被分解为不同的子系统。设计正交化算法和误差减小率（error reduction ratio, 简称ERR），可以确定子系统中质量和自由度之间的线性及非线性连接的所有信息。在辨识过程中，时变参数的时间表达式可以由新方法准确给出。用一个3自由度（degree-of-freedom, 简称DOF）集中质量系统和一个机械臂结构的辨识过程为例，对所提出的方法进行验证。由于简单性及高效性，此方法将在实际工程中取得广泛的应用。     

随车起重机伸缩臂截面多目标优化

为了提高某火箭炮弹药装填车随车起重机伸缩臂的结构刚度,减轻结构质量,建立了随车起重机伸缩臂参数化模型,并对伸缩臂在水平受载状态下进行仿真分析。以伸缩臂截面尺寸参数为设计变量,借助最优拉丁超立方试验设计建立样本空间,构造响应面多项式函数近似模型。在此基础上,利用NSGA-Ⅱ型遗传算法对伸缩臂自身重量、挠度进行多目标优化。优化结果表明:伸缩臂质量减轻了24.5%,减重效果明显。文中所采用的将参数化建模、有限元分析和数值寻优相结合的优化方法,可为起重机伸缩臂截面优化提供一定的参考。