LLC-Tray在氯乙烯精馏塔工业中的开发进展

LLC-Tray(主体连续传质塔板)乃是在NewVST(新型垂直筛板)的基础上新近开发成功的、性能更优秀的新型高效喷射型塔板.本文简单描述了LLC-Tray的结构、操作工况与技术性能,并详细介绍了LLC-Tray在PVC行业低、高沸精馏塔的技术开发所取得的新进展.     

RTM工艺中气泡形成及消除研究

总结了关于RTM（树脂压铸）工艺中气泡缺陷的文献报道，对RTM中气泡缺陷的形成机理、影响因素及各研究者提出的消泡方法、理论和模型进行了概述，同时对RTM工艺中气泡缺陷的研究现状给予充分关注，并对RTM缺陷研究的未来方向进行了展望。     

利用粉煤灰生产SiC陶瓷原料

利用粉煤灰部分或全部代替石英砂,配以适量的锯末,在高温炉中特定的烧成制度下,采用SiO2-C还原法将粉煤灰中的二氧化硅与锯末中的碳结合制取高性能的SiC陶瓷原料。利用正交实验对合成工艺中的合成温度、保温时间、碳过量数进行了设计和探索性实验,并对合成产物中的碳化硅的含量进行了测试。研究表明,在经催化剂(FeCl26H2O)浸泡12小时,加入2%矿化剂,在1380℃的合成温度下,保温时间2小时,碳过量10%的情况下,生成的SiC陶瓷原料中SiC的含量在53.6%以上。     

Sol-Gel Alumina Coating for Improved Cyclic Oxidation Resistance of Silicon Nitride

A 25 nm thick α-alumina layer was deposited on a turbine-grade silicon nitride by sol-gel dip coating and subsequent heat treatment in air at 1200°C. This layer had a nanometer grain structure. Silicon nitride protected by this thin layer showed a significant improvement in oxidation resistance over its uncoated counterpart after 200 cyclic exposures in air at 1250°C. The oxide layer grown on the coated silicon nitride also exhibited superior surface morphology, compared with the uncoated silicon nitride.     

纳米层状双金属氢氧化物的制备及结构表征

采用恒定pH 12±0.2,按n(Mg2+)∶n(Al3+)∶n(OH-)∶n(CO2-3)=6∶2∶16∶1配制溶液,采用一步反应液相法,制备纳米层状双金属氢氧化物(LDH)粉体.为了获得无团聚、分散均匀的纳米粉体,探讨了溶剂置换干燥、真空干燥、常压干燥对纳米LDH粉体形成团聚的影响;用X射线衍射仪、透射电镜、红外光谱仪和元素分析仪对样品的物相、形貌、粒径和组成进行了表征.结果表明,溶剂置换干燥能够有效防止纳米粉体形成硬团聚,样品分散性好,呈针状形态,长50 nm,宽5 nm.     

高强度快干变性淀粉粘合剂的研究及在纸制品包装中的应用

本文介绍了高强度快干变性淀粉的制备原理和工艺,以及用该变性淀粉调配瓦楞纸板用粘合剂的方法和应用情况。讨论了变性淀粉粘合剂的初粘力,干燥速度等并与普通淀粉粘合剂作了比较。     

低浓度的阴离子洗涤剂实验室内的质量控制

在环境监测中低浓度的阴离子洗涤剂实验室内质量控制应采取以下措施：空白试验值测定，检出限的确定，空白试验的质量控制图，校准曲线的检验，标准样品的测定。     

Thermodynamic Calculation of the Zirconia–Calcia System

An optimal thermodynamic data set for the zirconia–calcia system is evaluated by the CALPHAD (CALculation of PHAse Diagrams) method applied to experimental phase diagram and thermodynamic data. The liquid and C _ss (cubic ZrO₂ solid solution) are described by a subregular solution model. Three compounds, CaZr₄O₉, Ca₆Zr₁₉O₄₄, and CaZrO₃, are modeled as stoichiometric compounds. A regular solution model is applied to the other phases. Comparisons between calculated and measured phase diagrams and thermodynamic quantities show that most of experimental information is satisfactorily accounted for by thermodynamic calculations. The calculations also reasonably predict the measured electromotive force concerning the metastable C _ss.     

Water Bloom Precursor Analysis Based on Two Direction S-Rough Set

In the field of water quality management, it is vital to determine the main precursory anomalies from the precursor of intricate water bloom in the context of a given area. In this paper, a water bloom precursor analysis method, based on two direction singular rough set, was proposed. This approach was produced on the basis of the different sections and pre-water bloom of water bloom precursor anomalies and characteristic of elements transferred in singular rough set. For testing the validity of two direction singular rough set application in water bloom precursor analysis, Xiangxi River, which is one of the typical tributaries of Three Gorges Reservoir in China, was selected as study area. The result showed that compared with other indexes, pH and dissolved oxygen (DO) are the most valuable indicators of water bloom in the precursory anomalies. Furthermore, regarding with water bloom precursory anomalies in Xiangxi River, most of the nutrient loading and biological community are the key indicators. Hence, this method can determine the main precursory anomaly for water bloom in the study area, which provides powerful knowledge support to water quality specialists for them to comprehensively analyze precursory anomaly so as to find out its relationship with occurrence law of water bloom.     

非水溶剂回滴法测定低镍甲烷化催化剂的表面酸性

本文采用非水溶剂回滴法测定了低镍甲烷化催化剂和载体γ—Al2O3的表面酸性，并与催化剂的活性、组成、比表面积关联。实验结果说明，助剂的种类、含量对表面酸性有明显影响，催化剂催化活性与表面酸性关系不大。