Requirement of ultra-high voltage GIS arrester to voltage gradient of metal-oxide varistor

The surge arrester with excellent protection characteristics would decrease the overvoltage level ap- plied on the power apparatus to reduce their insulation levels and manufacturing bottleneck. The arrester for the 1000-kV ultra-high voltage ac power transmission system is designed as tank-type structure. The field-circuit combination numerical method combining the three-dimensional finite element method with circuit is proposed to analyze the potential distribution of GIS arrester. By comparing several design schemes, the most effective method to improve the potential distribution along the varistor column is to increase the voltage gradient of the ZnO varistor. Synthesizing several influential factors, the suitable voltage gradient of ZnO varistor should be controlled to 435 V/mm, and the resulted nonuniform degree of the potential distribution along the varistor column inside the GIS arrester would be controlled smaller than 10%. The result in this paper provides the fundamental technical index for the study of the high voltage gradient ZnO varistors.     

Effect of coagulation temperature on structures and properties of poly(<Emphasis Type="Italic">p</Emphasis>-phenylene benzobisoxazole) (DHPBO) fibers during dry-jet wet-spinning process

The effect of coagulation temperature on the morphology, microstructures and mechanical properties of dihydroxy poly(p-phenylene benzobisoxazole) (DHPBO) fibers was investigated during dry-jet wet-spinning process, in which the coagulation bath concentration and drawn ratio were kept as 10 wt% of PPA in water and 1.7, respectively. The structures and mechanical properties of the as-spun DHPBO fibers were characterized by FTIR, XRD, SEM, and single fiber tensile testing. The results indicated that in PPA/H₂O coagulation system, when the coagulation temperature was 25°C, highly crystallized DHPBO as-spun fibers possessing fine crystallites, circular and smooth morphology, and excellent mechanical properties could be achieved. Supported by the National Natural Science Foundation of China (Grant No. 50673017), Shanghai Leading Academic Discipline Project (Grant No. B603) and the Program of Introducing Taleuts of Discipline to University of People’s Republic of China (“111” Program) (Grant No. 111-2-04)     

Costate estimation for dynamic systems of the second order

The dynamics of a mechanical system in the Lagrange space yields a set of differential equations of the second order and involves much less variables and constraints than that described in the state space. This paper presents a so-called Legendre pseudo-spectral (PS) approach for directly estimating the costates of the Bolza problem of optimal control of a set of dynamic equations of the second order. Under a set of closure conditions, it is proved that the Karush-Kuhn-Tucker (KKT) multipliers satisfy the same conditions as those determined by collocating the costate equations of the second order. Hence, the KKT multipliers can be used to estimate the costates of the Bolza problem via a simple linear mapping. The proposed approach can be used to check the optimality of the direct solution for a trajectory optimization problem involving the dynamic equations of the second order and to remove any conversion of the dynamic system from the second order to the first order. The new approach is demonstrated via two classical benchmark problems. Supported by the National Natural Science Foundation of China (Grant Nos. 10372039, 10672073), and the Innovation Fund for Graduate Students of NUAA (Grant No. 4003-019016)     

Development of Zr/ZrO<Subscript>2</Subscript> high temperature and high pressure sensors for <Emphasis Type="Italic">in-situ</Emphasis> measuring chemical parameters of deep-sea water

In order to in situ measure chemical parameters of deep-sea water and hydrothermal fluids at midocean ridge(MOR), it is necessary to use high temperature and high pressure chemical sensors.Developing new sensors is essential to measure in-situ pH and other chemical parameters(dissolved H2, dissolved H2S) of deep-sea water and hydrothermal fluids in a wide temperature range(2℃―400℃) at MOR vents.The YSZ(Yttria Stabilized Zirconia, 9%Y2O3) ceramic-based(HgO/Hg) chemical sensors possess excellent electrochemic...     

Introduction of fluorin into PBO polymer chains: Toward higher thermal stability and lower dielectric constant

A series of novel fluorinated benzoxazole polymers (6FPBO's) with high thermal stability and low dielectric constant were synthesized by copolymerization of 1,3-diamino-4, 6-dihydroxybenzene dihy-drochloride (DAR), 1,4-benzenedicarboxylic acid (PTA) and various amount of 4'4- (hexafluoroisopro-pylidene) bis (benzoic acid) (BIS-B-AF) in the medium of polyphosphoric acid (PPA). 6FPBO fibers were then obtained via dry-jet wet-spinning technique and characterized by means of Fourier transform infrared (FTIR) spectra, thermogravimetric analysis (TGA), single fiber tensile testing machine and scanning electron microscopy (SEM). FTIR spectrum of 6FPBO fibers indicated that the fluorine groups had been incorporated into PBO molecular chains successfully. TGA curves revealed that 6FPBO fibers possessed high thermal stability just as pure PBO fibers. Moreover, dielectric constant spectrum of 6FPBO exhibited that the polymers had low dielectric constant, especially in the range of high- frequency.     

Earth pressure balance control for EPB shield

This paper mainly deals with the critical technology of earth pressure balance (EPB) control in shield tunneling. On the assumption that the conditioned soil in the working chamber of the shield is plasticized, a theoretical principle for EPB control is proposed. Dynamic equilibrium of intake volume and discharge volume generated by thrust and discharge is modeled theoretically to simulate the earth pressure variation during excavating. The thrust system and the screw conveyor system for earth pressure cont...     

数字校园混合模式下答疑系统的设计与实现

针对传统答疑系统中文字消息通信实时性不强、语音流量过于集中, 以及邮件空问答疑等问题, 提出了由Web服务端、答疑客户端和监控服务端组成的基于组件的混合模式答疑设计模型.嵌入WehBrowser组件和UDP组件设计的客户端除了常规的Web访问和解析功能外, 通过与监控服务端的连接实现了多个用户的实时文字消息答疑和分学科分组的语音答疑.提出了邮件空间答疑的设计方法.分析了3端结构中基于对称加密算法的UDP消息传递的通信过程.运行结果表明, 该模型设计是可行的.     

ZnO一维纳米结构在金属基底上的原位生长和表征

以Cu—Zn合金片为基底并提供Zn源,在含氧气氛中通过调控反应温度和氧偏压,采用热氧化法直接在Cu-Zn合金片上大面积可控地合成了多种形貌的ZnO一雏纳米材料薄膜（包括纳米带、纳米片、纳米梳和纳米线等）,采用多种分析方法对产物的形貌、结构进行了详细的表征,并对其相应的生长模型进行了讨论。结果表明,反应温度和氧偏压对ZnO纳米结构的生长至关重要,随着反应温度升高或氧含量的减少,气相Zn／O物种的偏压比增加,ZnO纳米结构尺寸变小。     

纳米聚丙烯酸酯微乳液改性纳米CaCO3研究

分别采用聚丙烯酸酯乳液和纳米级聚丙烯酸酯微乳液对纳米CaCO3进行改性,通过红外光谱分析、热重分析和扫描电镜分析研究改性纳米CaCO3的结构和性能。结果表明,改性后的纳米CaCO3由亲水疏油性变为亲油疏水性,纳米级聚丙烯酸酯微乳液与纳米CaCO3粒子表面发生了化学反应,并包覆到纳米CaCO3粒子表面。     

基于Visual C＋＋的虚拟PLC仿真软件开发

为了能够不依托于实际硬件可编程控制器来实现基于可编程控制器的控制,研究了利用Visual C++开发的虚拟可编程控制器仿真软件.研究了基于面向对象方法的梯形图的绘制技术,以及基于二叉树的梯形图向指令表的转换问题.十字路口交通灯的虚拟仿真表明,该虚拟可编程控制器仿真软件可以用于可编程控制器的实训和实验教学.