Immune clonal coevolutionary algorithm for dynamic multiobjective optimization

In this paper, a new evolutionary algorithm, called immune clonal coevolutionary algorithm (ICCoA) for dynamic multiobjective optimization (DMO) is proposed. On the basis of the basic principles of artificial immune system, the proposed algorithm adopts the immune clonal selection to solve DMO problems. In addition, the theory of coevolution is incorporated in ICCoA in global operation to preserve the diversity of Pareto-fronts. Moreover, coevolutionary competitive and cooperative operation is designed to enhance the uniformity and the diversity of the solutions. In comparison with NSGA-II, immune clonal algorithm for DMO and direction-based method, the simulation results obtained on 5 difficult test problems and on related performance metrics suggest that ICCoA can achieve better distributed solutions and be very effective in maintaining the uniformity of Pareto-fronts.     

水热法制备ZrO_2纳米微晶及对乙醇和丁烷气敏性研究

用水热法制备 Zr O2 纳米微晶的平均尺寸为直径 5 nm,长 7.5 nm。由 X射线衍射确认晶相为单斜相。并对其形状和大小进行了透射电镜和激光散射分析 ,结果表明 Zr O2 纳米粒子在水溶液中存在软团聚 ,团聚体平均尺寸约 90 nm。着重研究了 Zr O2 纳米微晶对乙醇及丁烷的气敏性能 ,结果表明用纳米级 Zr O2 粒子制备的气敏元件对乙醇和丁烷有好的气敏性。并且随着纳米粒子尺寸降低 ,对气体敏感性增强     

聚羟基脂肪酸酯的合成和应用研究进展

介绍了聚羟基脂肪酸酯(PHA)的合成方法，重点讨论了微生物合成法、碳源、化学合成、分离方法及降低PHA生产成本的方法，介绍了PHA的性能及其改性研究，论述了PHA在生物医学、农业、电子、食品包装等领域的应用。     

Studies on grafting of acrylic acid onto polypropylene melt‐blown nonwovens induced by electron‐beam preirradiation

We report the graft copolymerization of acrylic acid onto the polypropylene (PP) melt‐blown nonwovens induced by electron beam (EB) preirradiation in this article. The occurrence of the graft copolymerization was confirmed by means of XPS, FTIR, and SEM. The effects of preirradiation dose, monomer concentration, bath ratio, reaction time, and temperature on the graft ratio were investigated. The water conservation, water absorption rate, and K⁺ exchange capacity were also determined on the grafted PP melt‐blown nonwovens, which showed that EB preirradiation‐induced grafting was an effective way to improve the hydrophicility of PP melt‐blown nonwovens. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4971–4977, 2006     

超重力旋转填料床的有效比表面积

以CO2-NaOH为介质,研究了填料结构、超重力因子、液体流量和气体流量等对两种多孔板错流旋转床有效比表面积的影响规律.结果表明,不锈钢多孔波纹板的有效比表面积大于聚丙烯多孔板,不锈钢多孔波纹板填料利用周期性变化的波纹表面不仅可以有效利用填料自身的比表面积,而且可起到良好的雾化扩展比表面积的作用,使有效比表面积增大至2.66倍.对实验数据进行回归得出了两种填料结构有效比表面积的关联式,根据关联式计算的有效比表面值与实验值吻合较好.     

基于逐次散射法的海洋-大气矢量辐射传输模式

首先推导了粗糙洋面双向偏振反射模型pBRDF(Bidirectional Polarized Reflectance Distribution Function),并将其与SOSVRT(Successive Order of Scattering Radiative Transfer)矢量辐射传输模式耦合,建立了海洋-大气耦合的矢量辐射传输模式,并对该耦合模式的模拟结果与前人模拟结果进行对比,验证了该耦合模式的可靠性与有效性。不同大气和洋面状态、不同高度的主平面内辐射强度和偏振度的模拟结果表明:pBRDF模型可以很好地模拟不同风速下洋面的偏振反射分布特征;洋面在特定角度具有很高的偏振度,并对大气顶的偏振辐射有很大影响。因此,该耦合模式可以更准确地处理辐射光谱在海洋-大气两种介质间的传输问题,对矢量辐射传输、大气遥感问题的研究有重要意义。     

一种基于拒绝应答的路由协议算法AR-AODV

针对AODV协议进行了研究, 并在此基础上进行改进。通过更改路由请求包和路由回复包的结构, 增加负载因子项, 给出了一种拒绝应答策略的AR-AODV算法以适应重负载网络, 并平衡节点能量消耗。通过NS2环境进行仿真实验, 结果表明AR-AODV协议比AODV协议拥有更低的端到端时延和路由开销, 可缓解网络中心节点的负载并提高网络的性能。     

浅谈多媒体教学以信息管理中心为例

高职教育的特点就是以适应社会需要为目标、以培养技术应用能力为主线设计学生的知识、能力、素质结构和培养方案,毕业生应具有基础理论知识适度、技术应用能力强、知识面较宽、素质高等特点.以“应用”为主旨来构建课程和教学内容体系.     

乙烯二聚制高纯丁烯－1技术经济评价

本文对生产高纯度丁烯－１的Ａｌｐｈａｂｎｔｏｌ工艺进行了技术经济评价，认为该工艺条件简单、反应条件温和，而且投资少，所以很适合事在发展中国家应用。     

Effect of structural and electrochemical properties of different Cr-doped contents of Li[Ni1/3Mn1/3Co1/3]O2

Layered Li[Ni_(1−x)/3Mn_(1−x)/3Co_(1−x)/3Cr_x]O₂ materials with x = 0, 0.01, 0.02, 0.03, 0.05 are prepared by a solid-state pyrolysis method. The oxide compounds were calcined with various Cr-doped contents, which result in greater difference in morphological (shape, particle size and specific surface area) and the electrochemical (first charge profile, reversible capacity and rate capability) differences. The Li[Ni_(1−x)/3Mn_(1−x)/3Co_(1−x)/3Cr_x]O₂ powders were characterized by means of X-ray diffraction (XRD), charge/discharge cycling, cyclic voltammetry, and SEM. XRD experiment revealed that the Li[Ni_(1−x)/3Mn_(1−x)/3Co_(1−x)/3Cr_x]O₂ (x = 0, 0.01, 0.02, 0.03, 0.05) were crystallized to well layered -NaFeO₂ structure. The first specific discharge capacity and coulombic efficiency of the electrode of Cr-doped materials were higher than that of pristine material. When x = 0.02, the sample showed the highest first discharge capacity of 241.9 mAh g⁻¹ at a current density of 30 mA g⁻¹ in the voltage range 2.3–4.6 V, and the Cr-doped samples exhibited higher discharge capacity and better cycleability under medium and high current densities at room temperature.