Heat transfer of combined forced and natural convection from horizontal cylinder to air

Experimental investigations have been carried out for combined convective flows of air induced around uniformly heated, horizontal cylinders. Three cases of aiding, opposing, and cross flows were examined. The experiments covered the ranges of the Reynolds and modified Rayleigh numbers of Re_d=50 to 900 and Ra_d^*=5×10⁴ to 3×10⁶. The flow fields around the cylinders were visualized with smoke. The results showed that separation points gradually shift from those of the forced convection to the top edge of the cylinder with increasing wall heat fluxes. The local heat transfer coefficients of the cylinders were also measured. Although the local coefficients show complex variations with the forced flow velocities and the wall heat fluxes, the overall coefficients become higher than those estimated from pure forced and natural convections throughout the cases of aiding, opposing, and cross flows. Moreover, it was confirmed that the overall Nusselt numbers as well as the separation points can be predicted with the non‐dimensional parameter (Gr_d^*/Nu_dRe_d²). © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(8): 474–488, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20180     

Seismic tests of a pile-supported structure in liquefiable sand using large-scale blast excitation

Extensive, large-amplitude vibration tests of a pile-supported structure in a liquefiable sand deposit have been performed at a large-scale mining site. Ground motions from large-scale blasting operations were used as excitation forces for vibration tests. A simple pile-supported structure was constructed in an excavated 3 m-deep pit. The test pit was backfilled with 100% water-saturated clean uniform sand. Accelerations were measured on the pile-supported structure, in the sand in the test pit, and in the adjacent free field. Excess pore water pressures in the test pit and strains of one pile were also measured.Vibration tests were performed with six different levels of input motions. The maximum horizontal acceleration recorded at the adjacent ground surface varied from 20 Gals to 1353 Gals. These alternations of acceleration provided different degrees of liquefaction in the test pit. Sand boiling phenomena were observed in the test pit with larger input motions. This paper outlines vibration tests and investigates the test results.     

Near-IR sensitization of nanocrystalline TiO2 with a new ruthenium complex having a 2,6-bis(4-carboxyquinolin-2-yl)pyridine ligand

A new ruthenium(II)–polypyridine complex (1) having a 2,6-bis(4-carboxyquinolin-2-yl)pyridine ligand was synthesized as a sensitizer for dye-sensitized solar cells (DSCs). This complex exhibited remarkable light-harvesting properties in the near-IR region. DSCs sensitized with 1 showed a 35% incident photon-to-current conversion efficiency (IPCE) at 900 nm.     

Gibbs Energy Change of Carbothermal Nitridation Reaction of Al2O3 to Form AlN and Reassessment of Thermochemical Properties of AlN

The experimental method for the high-temperature reaction equilibria in the AlN-Al₂O₃ system has been established. The equilibrium N₂-CO gas compositions coexisting with AlN- Al₂O₃-graphite have been successfully measured by quadrupole mass spectrometry and gas chromatography. From the obtained results, the standard Gibbs energy change of the forming reaction of AlN by carbothermal nitridation is determined at temperatures ranging from 1723 to 1899 K:
From the obtained result, the standard Gibbs energy of formation of AlN and the third-law enthalpy of formation of AlN at 298.15 K are derived as
The disagreement between the present results and values in the NIST–JANAF thermodynamic table is discussed.     

Effects of Spraying Ozonated Water on the Severity of Powdery Mildew Infection on Cucumber Leaves

Effects of spraying ozonated water on the severity of powdery mildew infection, visible disorder/injury occurrence, and net photosynthesis in cucumbers were investigated. The severity in the ozonated water treatment was contained to almost the same level throughout the 14-day period of the experiment, while the severity steadily increased in the non-treated control and distilled water treatment. Neither visible disorder/injury on the leaves nor a large difference in net photosynthesis between before and after spraying the ozonated water was observed. The results indicate that ozonated water can be at least a partial alternative to agricultural chemical fungicides for powdery mildew on cucumber leaves.     

An automatic Euler solver using the unstructured upwind method

A fully-automatic grid generator and an unstructured upwind method for the Euler equations are developed in order to achieve automation in flow computations. The unstructured grid is generated using two techniques: a geometry-adaptive refinement; and a solution-adaptive refinement. The former introduces information about the flowfield geometry into the grid, and the latter introduces the fluid physics. A combination of these two techniques enables the generation of a grid in a fully-automatic manner. Flowfields are solved by an unstructured upwind solver, which is an extension of the flux-vector splitting method of Van Leer for use on arbitrary-shaped unstructured meshes. This robust flow solver with the automatic grid generator can be a useful CFD tool for routine engineering work. The method is applied to external and internal flow problems to demonstrate its capability.     

Performance evaluation of heat exchanger using alternative refrigerant R407C

R22 (HCFC22) has been widely used as the refrigerant in air conditioners. According to the Montreal protocol for ozone layer protection, the total production of HCFCs has been capped since the beginning of 1996. Zeotropic refrigerant mixture R407C and nearly azeotropic refrigerant mixture R410A have been selected as alternatives to R22. We examined refrigerant passages in heat exchangers used in heat pump‐type room air conditioners using zeotropic refrigerant R407C through simulation, and obtained the following conclusions. In an indoor heat exchanger, a counter flow configuration when operating as a condenser has higher temperature efficiency. When an outdoor heat exchanger operates as an evaporator, a configuration that suppresses the temperature glide by partially reducing the refrigerant passage not only produces high efficiency, but also reduces the frost formation on fins. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(8): 626–638, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10064     

Multiple trait genomic evaluation of conception rate in Holsteins

A national data set of artificial inseminations in US Holsteins was used to obtain genetic evaluations for conception rate (CR). The objective of this study was to investigate the feasibility and resulting accuracy from using all available phenotypic, pedigree, and genomic information. Evaluations were performed by regular BLUP or by BLUP with the traditional pedigree and genomic relationships combined in a unified single-step procedure (SSP). Genetic parameters of CR in the first 3 parities were estimated with data from New York State only. Heritability estimates were around 2% and genetic correlations between CR in different parities were >0.73. The R² obtained with the SSP were almost twice as large as those achieved with regular BLUP. Computing the SSP took 2 h, and it was 33% slower than a regular BLUP. A multiple-trait evaluation of CR using the SSP is both possible and advantageous.     

PIV measurement and turbulence scale in turbulent combustion

We have investigated turbulent combustion by PIV (Particle Image Velocimetry) technique. Comparing with LDV data, the validity of PIV measurements has been confirmed. Particularly, the conditions of sampling number and spatial resolution have been shown to yield reliable data using PIV. Based on the velocity fields in cold flow and combustion, the interaction between flame and flow has been discussed. It was observed that the flow field is changed by combustion and the turbulence is reduced. In order to determine statistical quantities such as mean velocity and RMS of velocity fluctuation, a sampling number of 1000 is needed. Moreover, the velocity correlation coefficient was evaluated to obtain the integral length scale of the flow. For both cold flow and combustion, the PIV estimated scale is very close to that of LDV based on the assumption of Taylor's hypothesis. As a result, the spatial resolution in this study is about 6 times smaller than the integral length scale. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(7): 501–512, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20129