Photoluminescence and X-ray Diffraction of Distributed Bragg Reflector

Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double- crystal X- ray diffraction measurement. The expected high quality epitaxial DBR structure was verified. In the X- ray double- crystal rocking curves of DBR the zeroth- order peak, the first and second order satellite peaks were measured. Splitting of diffraction peak appeared in the rocking curves was analyzed. The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.     

Experimental Research on Erbium-doped Superfluorescent Fiber Source

The effects of the variations in fiber length, fiber mirror reflectance on efficiency and output power are experimentally investigated for erbium-doped double pass backward superfluorescent fiber sources (SFSs). The influence of fiber length on mean wavelength stability (MWS) has also been demonstrated. By incorporating a short section of un-pumped erbium-doped fiber (EDF) at the output port, the pump power dependent on MWS becomes independent of pumped EDF length. This is a novel phenomenon that hasn‘t been reported up to now,and should be helpful to SFS fabrication and theory analysis. By using a fiber Michelson interferometer as spectrum slicing component,a multi-wavelength fiber source (MWFS) with ～20 channels (from 1542nm to 1559nm) is got. The MWFS has a channel spacing of ～0. 8 nm which satisfies ITUstandard. The intensity fluctuation among channels is less than 0.5dB,and the extinction ratio of all channels is above 14dB. This kind of MWFS should be useful to wavelength division multiplexing systems.     

一种动态开关电容运算放大器共模负反馈电路

本文主要介绍了一种应用于Cascode结构运放中的开关电容共模负反馈电路，它具有稳定性好、对运放频率特性影响小、不消耗额外功率等优点。对电路运用Hspice进行了模拟，并给出了模拟结果。     

Ca^2＋、Sr^2＋掺杂对Pr0.6CaxSr0.4-xFeO3-δ物相、结构及电性能的影响

采用柠檬酸-硝酸盐法合成了碱土金属双掺杂的Pr0.6CaxSr0.4-xFeO3-δ（X=0.0-0.4）系列复合氧化物粉体,用TG-DTA，XRD，FT-IR，SEM等手段对产物中钙钛矿物相的形成及微结构进行了表征,结果表明，样品在800℃焙烧2h后显现钙钛矿结构的主要衍射峰；随热处理温度的升高，XRD谱峰强度逐渐增大，1000℃煅烧2h即得到正交钙钛矿结构的单相固溶体；系列样品结晶化程度和晶粒尺寸随样品中Ca含量的增大而减小；电导率测试结果表明，Ca^2＋、Sr^2＋双掺杂样品的电导率随Sr^2＋含量的增大而增大，低温段（T≤650℃）烧结陶瓷体的导电行为遵循小极化子导电机制。     

土卡河水电站混凝土新型复合掺合料研究与应用

土卡河水电站采用磨细矿渣加石灰石粉的新型复合掺合料替代粉煤灰作为混凝土中掺合料。文章介绍了这种新型复合掺合料的性能和应用情况。     

用网络计划技术优化企业生产计划问题

应用网络计划技术对杭州开关厂在生产计划控制中存在的实际问题进行了深入的研究。在充分剖析理论的基础上，结合实际工作情况，对大型机电一体化设备CTH500kW中频加热机的生产技术准备工作进行了网络计划的编制。其中有工程分解的“条块”结合、工序编码系统、资源优化与时间优化的兼容等，取得了良好的成果。     

端电压比较法直接寻找无刷直流电动机换相点及其斩波调速

提供了一种利用端电压比较结合软件算法直接寻找直流无刷无位置传感器电动机换相点的方案，解决了直流无刷无位置传感器电动机控制的关键问题－转子位置检测，并以单片机PIC16C72为核心构成先进的数字控制系统，实现了软件斩波调速。     

项目管理软件的开发思路

详细介绍了项目管理的发展及项目管理软件的现状。通过对P3管理软件的分析论述，得出项目管理软件系统的开发方案。     

固定背景下的随机波形提取模型

分析了当前对于从固定背景下的特征符号与背景符号相粘连的图表中提取信息所存在的问题，设计了适用于此类问题的方法模型。提出了一种在固定背景下通过背景符号检测和背景符号擦除来实现随机波形提取的方法。     

无后坐控爆拆除砖砌水塔的实践

介绍了对一砖砌水塔进行无后坐拆除爆破时爆破参数的选取,以及控制后坐的措施.实践证明:用控制爆破方法,选择合理的爆破参数完全可以控制水塔在倾倒时的后坐.