Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

An optimum design of robotic food handling by using Burger model

This paper discusses an optimum design approach on robotic food handling by considering the characteristics of viscoelasticity of object. We pick up a traditional Japanese food, “Norimaki” as a typical example with the viscoelastic characteristics. We first show that the dynamic characteristics of Norimaki can be expressed by utilizing the Burger model. After testing the parameter sensitivity, we show an example of the optimum design for determining the combination of the hand stiffness and the operating velocity. We further show that the resultant plastic deformation can be formulated with the exact solution.     

Observation of three-dimensional elemental distributions of a Si device using a 360 degrees -tilt FIB and the cold field-emission STEM system

A technique for preparation of a pillar-shaped specimen and its multidirectional observation using a combination of a scanning transmission electron microscope (STEM) and a focused ion beam (FIB) instrument has been developed. The system employs an FIB/STEM compatible holder with a specially designed tilt mechanism, which allows the specimen to be tilted through 360 degrees [T. Yaguchi, M. Konno, T. Kamino, T. Hashimoto, T. Ohnishi, K. Umemura, K. Asayama, Microsc. Microanal. 9 (Suppl. 2) (2003) 118; T. Yaguchi, M. Konno, T. Kamino, T. Hashimoto, T. Ohnishi, M. Watanabe, Microsc. Microanal. 10 (Suppl. 2) (2004) 1030]. This technique was applied to obtain the three-dimensional (3D) elemental distributions around a contact plug of a Si device used in a 90-nm technology. A specimen containing only one contact plug was prepared in the shape of a pillar with a diameter of 200nm and a length of 5mum. Elemental maps were obtained from the pillar specimen using a 200-kV cold-field emission gun (FEG) STEM model HD-2300C equipped with the EDAX genesis X-ray energy-dispersive spectrometry (XEDS) system through a spectrum imaging technique. In this study, elemental distributions of minor elements with weak signals were enhanced by applying principal component analysis (PCA), which is a superior technique to extract weak signals from a large dataset. The distributions of elements, especially the metallization component Ti and minor dopant As in this particular device, were successfully extracted by PCA. Finally, the 3D elemental distributions around the contact plug could be visualized by reconstruction from the tilt series of maps.     

Homo- and copolymerizations of 3-(N-carbazolyl)-1-propyne and its homologues by Mo and W catalysts

Summary 3-(N-Carbazolyl)-1-propyne polymerized with MoCl₅- and WCl₆-based catalysts to produce a polymer in high yields. The MoCl₅ and MoCl₅-n-Bu₄Sn catalysts were the most effective (the systems solidified immediately after initiation of polymerization with these catalysts). The product polymer was a yellow solid insoluble in any solvent. Copolymerization of the present monomer with tert-butylacetylene by MoCl₅-n-Bu₄Sn produced a copolymer; it had a high molecular weight (M _w 350,000), completely dissolved in toluene, CHCl₃ etc, and formed a free-standing film by solution casting. -N-Carbazolyl-1-hexyne and-1-octyne produced toluene-insoluble polymers with WCl₆-Ph₄Sn.     

Clinical application of single-shot echo-planar diffusion-weighted imaging with compressed SENSE in prostate MRI at 3T: preliminary experience

Magnetic Resonance Materials in Physics, Biology and Medicine - Image quality (IQ) of diffusion-weighted imaging (DWI) with single-shot echo-planar imaging (ssEPI) suffers from low signal-to-noise...     

Design methodology of magnetic fields and structures for magneto-mechanical resonator based on topology optimization

Magneto-mechanical resonators—magnetically-driven vibration devices—are used in many mechanical and electrical devices. We develop topology optimization (TO) to configure the magnetic fields of such resonators to enable large vibrations under specified current input to be attained. A dynamic magneto-mechanical analysis in the frequency domain is considered where we introduce the surface magnetic force calculated from the Maxwell stress tensor. The optimization problem is then formulated involving specifically the maximization of the dynamic compliance. This formulation is implemented using the solid-isotropic-material-with-penalization method for TO by taking into account the relative permeability, Young’s modulus, and the mass density of the magnetic material as functions of the density function. Through the 2D numerical studies, we confirm that this TO method works well in designing magnetic field patterns and providing matching between the external current frequency and eigenfrequency of the vibrating structure.     

Delignification kinetics of empty fruit bunch (EFB): a sustainable and green pretreatment approach using malic acid-based solvents

Recently, the development of efficient and environmentally benign solvents has received great attention to replace current harsh organic solvents. In this context, low-transition-temperature mixtures (LTTMs) have emerged as favorable green solvents for biomass delignification. Palm oil biomass, empty fruit bunch (EFB) was pretreated with commercial l-malic acid and microwave hydrothermally extracted cactus malic acid-derived LTTMs at 60, 80, and 100 °C. The LTTMs applied in this study were derived from malic acid–choline chloride–water and malic acid–monosodium glutamate–water with a molar ratio of 2:4:2 and 3:1:5, respectively. Three first-order reactions were used to express the delignification kinetic model of EFB. The first term was based on the initial stage and assigned as infinite due to the fast rate of delignification which could not be detected. The second and third terms were proportional to bulk and residual delignification stages. A good agreement was obtained between the kinetic model and the experimental data obtained in this study with R²?≥?0.91. The activation energies for the delignification reactions using l-malic acid and cactus malic acid-based LTTMs in the bulk and residual stages were approximated as 36–56 and 19–26 kJ/mol and 34–90 and 47–87 kJ/mol, respectively.     

Solar or surplus heat-driven actuators using metal hydride alloys

A metal hydride (MH) actuator provides mechanical work by applying the hydrogen pressure transition that originates from the reversible reaction of the MH alloy as it absorbs and desorbs hydrogen gas. The MH actuators that have been reported employ a Peltier element or an electrical heating resistance wire as a heat source. This paper describes the design of an MH actuator that is driven by low-quality heat sources, such as solar heat or surplus heat. A certain composition of a LaNi₅-based alloy that produces desorbing and absorbing reactions through a low-temperature difference is specified. This alloy composition can provide a large amount of hydrogen desorption using solar heat or surplus heated water and a large amount of hydrogen absorption by natural air cooling in an adequate reaction time. To improve the moving speed and to control the performance, a reciprocating air compressor that applies this solar or surplus heat-driven MH actuator is proposed. These findings support the efficacy of an MH actuator operating without electric or fossil fuel energy consumption.     

Stiffness-Damping Simultaneous Identification under Limited Observation

A more reliable and stable method, compared to the previous one developed by the present writers, of stiffness-damping simultaneous identification of shear-type building structures is proposed using stationary random records under limited observation. It is shown that when stationary random horizontal accelerations are recorded at the floors just above and below a specific story in a shear building model, the story stiffness and the damping ratio can be identified uniquely. The viscous damping coefficient and the material damping ratio can also be identified simultaneously in a numerical model structure. It is also shown that unfavorable effects by extraneous noises, including measurement noises, due to wind excitation, building facilities, and the motion of the occupants can be eliminated partially by using the present method. The accuracy of the present identification method is investigated through the actual records under limited observation in a base-isolated building.     

螺杆压缩机性能模拟的误差分析及稳定性判据

在螺杆压缩机作动室的压力脉动模拟分析中,针对采用的数值计算方法———Rouge＿Kutta法可能由于计算舍入误差累积而造成计算发散,提出导入Simpson误差评价公式,建立了评价作动室排气过程中的计算误差的数学模型.同时针对排气行程中,由于作动室压力和排气室压力非常接近,造成计算误差增大的倾向,通过数学推证,得到对处于排气行程的作动室的压力脉动进行数值计算的稳定性判据,对模拟计算结果的收敛性提供保障.