Color constancy from invariant wavelength ratios: An algorithm to simplify the chromatic adaptation model

In a recent article on color constancy, the chromatic adaptation model was of a novel type comprising three components separately calculated—hue, chromaticness, and lightness. The constant hue component was a simple calculation of predicted wavelength but the other two components were less direct. This article provides an algorithm to simplify the model's calculation. Calculation is far simpler and more intuitive than conventional models using complex 3 × 3 matrix transforms with their various and contentious adaptation primaries and potential disadvantages (e.g., in brightness and color gamut). The model is shown to be at least as accurate as six other (conventional) models and does not require high math skill. © 2015 Wiley Periodicals, Inc. Col Res Appl, 41, 468–476, 2016     

Using a cloud-centric middleware to enable mobile hosting of Web services: mHealth use case

The unceasing growth and divergence of the mobile landscape have led to the use of smartphone and tablet devices in consuming Web services (WS) in enterprises. However, in heterogeneous WS, the shift from the mobile client consumer approach to the mobile service hosting approach is insufficiently studied. With the advancement of storage and processing capabilities of these devices, coupled with the high availability of the Web, this research focuses on the use of the mobile devices as hosts of WS in a mHealth domain. In this paper, a cloud-centric middleware technique is employed to enable access to the mobile hosts. The paper presents mobile hosting of medical data which are modeled as light-weight WS which is deployed in a real-world system. Further, a workflow authorization model is proposed to ensure privacy and the prevention of unauthorized modification of data on the mobile hosts. A data encryption technique is also put forward to enforce security and privacy of the mobile hosted data. Our current implemented project, called SOPHRA, supports mobile communication over HTTP in a Wi-Fi environment.     

Bending diamonds by femtosecond laser ablation

We present a new method based on femtosecond laser ablation for the fabrication of statically bent diamond crystals. Using this method, curvature radii of 1 m can easily be achieved, and the curvature obtained is very uniform. Since diamond is extremely tolerant to high radiation doses, partly due to its densely packed lattice, such bent crystals are optimal solutions for crystal-based collimation and/or extraction. Furthermore, using interlaced ablation on both sides, the technique opens for the possibility of constructing a crystalline undulator based on the best material known, to approach the enormous beam densities required for lasing operation of such a device.     

An Empirical Testing of the Economic Base Theory

Most central cities must at present bargain with other units of their regions and the nation for the residents and industry they need; and their bargaining power is so weak as to threaten their viability unless aid from state and federal governments is supplied. Both in order to serve the disadvantaged residents they do attract, and to cultivate their attractiveness to other residents and to industry, cities must re-define “urban renewal” as consisting of large investments in the development of human, land, and transportation potentialities. Such investments must, as all investments, come from “surpluses” which are controlled by the states and the nation, not the cities.     

Effect of composition on the matrix transformation of the Co-Re-Cr-Ta-C alloys

Neutron diffraction measurement was performed in-situ at high temperatures on Co-Re-Ta-C alloys with and without Cr addition. This included alloys containing different C content with the C/Ta ratio varying between 0.5 and 1.0. The Co-Re-solid solution matrix of the experimental alloys is polymorphic (like in pure cobalt) and transformed from low temperature hexagonal ? phase to high temperature cubic γ phase on heating. This transformation is reversible and show hysteresis. The main alloying addition, Re, stabilizes the ? Co-phase and increases the transformation temperature to above 1273 K. The onset of the \(\varepsilon \rightleftharpoons \gamma\) transformation during heating and cooling was found to differ depending on the alloy composition. In alloys without Cr addition the transformation was not completed on cooling and the high temperature γ phase was partly retained at room temperature in metastable state with the amount depending on the cooling rate from high temperature. The diffraction and microstructural results showed that Cr is ? stabilizer (similar as Re) but the role of Ta is not clear. The C/Ta ratio has no direct effect on the matrix phase transformation. Nevertheless, it influences indirectly by determining the amount of Ta which is freely available in the matrix.     

Geometry Dependence of Magnetization Reversal in Nanocomposite Alloys

The geometrical optimization of aligned hard-soft permanent-magnet nanocomposites is investigated by model calculations. Considered criteria are the shapes of the soft and c-axis-aligned hard phases, the packing fraction of the soft phase, and magnetostatic interactions. Taking into account that the energy product is enhanced via the volume fraction of the soft phase, subject to maintaining coercivity, we find that the best structures are soft-magnetic cubes as well as long rods with a square cross section. Comparing embedded soft cubes with embedded soft spheres of the same size, our nucleation-field analysis shows that the volume fraction of the soft phase is enhanced by 91%, with a coercivity reduction of only 25%. Magnetostatic interactions often but not always deteriorate the permanent-magnet performance, as exemplified by the example of MnBi:FeCo bilayers and multilayers.     

Misalignment-Induced Bending in Pin-Loaded Tensile-Creep Specimens

In this paper, we have examined the possibility that elastic bending induced by load misalignment can affect creep measurements on pin-loaded tension specimens of silicon nitride (Si₃N₄). We have shown that elastic bending at room temperature can be as great as 42% of the axial strain when clean pins were used but was reduced to ∼3% when lubricated pins were used. Creep tests at the same applied stress and temperature were conducted on two groups of Si₃N₄ test specimens: one group used clean pins, and the other group used lubricated pins. By measuring the shapes of the specimens before and after the creep tests, we have determined that the loading holes were slightly misaligned before the creep tests and that small amounts of bending were induced by the creep tests. Bending occurred both in the gauge section of the specimen and in the transition region between the gauge section and the heads of the specimen (the latter phenomenon is defined as hinge bending). Our study indicated that the secondary creep rate, the hinge bending, and the bending of the gauge section was not dependent on pin lubrication, because the results from the clean and lubricated groups were statistically indistinguishable. Hinge bending was dependent on initial misalignment of the loading holes, whereas bending of the gauge section was independent of such factors.     

Influence of steel substrate roughness on morphology and mesostructure of TiO2 porous layers produced by template-assisted dip coating

Mesoporous titania films were prepared by template-assisted dip coating on 1.4301 stainless-steel substrates processed by grinding and spark erosion to different degrees of roughness. The influence of substrate roughness on the morphology and mesostructure of deposited films was studied. Textures produced by grinding with roughness R_a ranging from 0.10 to 0.78 μm did not noticeably affect the pore structure as confirmed by similar pore size and a single cubic mesophase formed on grinded steel. Grinding had a modest effect on the film integrity which manifested in fractures developed in the texture depressions. Greater roughness of the steel produced by spark erosion affected the micelle self-assembly process yielding two different mesophases on a substrate of 1.08 μm roughness, and resulting in a predominant loss of templated mesostructure on a rougher (R_a = 2.69 μm) substrate surface. Film surface area expressed as m² BET per m² of the substrate planar dimensions increased with substrate roughness. Higher roughness resulted in higher photocatalytic activity of crystalline films when tested in methylene blue decomposition. Given that a moderate surface texture had a negligible effect on the film mesostructure, introducing controlled substrate roughness may serve as a technique to enhance the total film surface area.     

Experimental investigations on liquid flow and heat transfer in rectangular microchannel with longitudinal vortex generators

The behaviors of improved Heat transfer and the associated higher pressure drop for liquid flow in rectangular micochannels with longitudinal vortex generators (LVGs) were determined experimentally for the Reynolds numbers of 170–1200 with hydraulic diameter of 187.5 μm and aspect ratio of 0.067 for LVGs with different number of pairs and angles of attack. It was found that the range of critical Reynolds numbers (600–730) were at a much smaller value by adding LVGs than the one without (Re ～ 2300); heat transfer performance was improved (9–21% higher for those with laminar flow and 39–90% for those with turbulent flow), while encountering larger pressure drop (34–83% for laminar flow and 61–169% for turbulent flow). Empirical correlations for these two parameters were then obtained by curve-fittings for a variety of rectangular microchannels under study.