A robust critical path in an environment with hybrid uncertainty

In this article, we consider the project critical path problem in an environment with hybrid uncertainty. In this environment, the duration of activities are considered as random fuzzy variables that have probability and fuzzy natures, simultaneously. To obtain a robust critical path with this kind of uncertainty a chance constraints programming model is used. This model is converted to a deterministic model in two stages. In the first stage, the uncertain model is converted to a model with interval parameters by alpha-cut method and distribution function concepts. In the second stage, the interval model is converted to a deterministic model by robust optimization and min-max regret criterion and ultimately a genetic algorithm with a proposed exact algorithm are applied to solve the final model. Finally, some numerical examples are given to show the efficiency of the solution procedure.     

Prediction of scouring around an arch-shaped bed sill using Neuro-Fuzzy model

In this study, Adaptive Neuro-Fuzzy Inference System (ANFIS) has been used to model local scouring depth and pattern scouring around concave and convex arch shaped circular bed sills. The experimental part of this research study includes seven sets of laboratory test cases which were performed in an experimental flume under different flow conditions. A data set consists of 2754 data points of scouring depth were collected to use in the ANFIS model. The ratio of arch diameter, D, to flume width, W, is used as a non dimensional variables in all test cases. The results from ANFIS model were compared with the results of ANN model obtained by Homayoon et al. [24] and previously presented models. The results indicated that for D/W equal to 1 and 1.2, the ANFIS models produced a good performance for convex and concave bed sills. As a result, the ANFIS models can be used as an alternative to ANN for estimation of scour depth and scour pattern around a concave bed sill installed with a bridge pier.     

Parameter identification and design of a robust attitude controller using <Emphasis Type="Italic">H</Emphasis><Subscript>∞</Subscript> methodology for the raptor E620 small-scale helicopter

Rigorous control synthesis for an unmanned aerial vehicle necessitates the availability of a good, reasonable model for such a vehicle. The work reported in this paper focuses on the modeling of a rotary unmanned aerial vehicle (RUAV) and the development of a robust controller that can handle parameter uncertainties and disturbances. The parameters of the plant model are obtained through the use of the prediction error method with real flight data. The response of the identified linear model shows a good match with the measured flight data. The H _∞ control scheme is applied to obtain a robustly stable controller using the identified model. The proposed controller is analyzed using frequency-domain analysis and time-domain simulations. The performance of the proposed H _∞ controller is better than that of the conventional proportional derivative controller in that the proposed controller has a shorter settling time and less overshoot. Furthermore, the degradation of the proposed controller performance is negligible and stability is maintained when the input gains to the plant are doubled, which demonstrates the good performance and robustness of the controller.     

Calcium carbonate and ammonium polyphosphate flame retardant additives formulated to protect ethylene vinyl acetate copolymer against fire: Hydrated or carbonated calcium?

In this study, the effect of the chemical nature of different calcium (Ca)-based minerals as flame retardant additives in combination with ammonium polyphosphate (APP), in 1:1 proportions, on the flame retardancy behavior and performance of ethylene vinyl acetate copolymer was discussed. Combining APP with partly and completely hydrated calcium oxide led to superior flame-retardant function detected in mass loss calorimeter measurements with respect to the corresponding system containing carbonated calcium. This privileged character was attributed to the higher reactivity of hydrated Ca-based fillers toward APP in comparison with Ca carbonate, which induced the formation of an intumescent residue. The difference between reactivity potential of hydrated and dry Ca was demonstrated by the newly formed thermally stable species, and further evidenced by thermogravimetric analysis performed on APP/fillers blends. Moreover, the presence of more crystalline domains in the Ca/phosphorus-based compounds was evidenced by XRD analysis of the mass loss calorimeter test residues. The results of this work highlight the role of blend additive systems on the performance of flame retardancy of polymer materials.     

Simultaneous removal of copper and zinc ions by low cost natural snail shell/hydroxyapatite/chitosan composite

In this work, the snail shell/hydroxyapatite/chitosan composite was prepared as adsorbent. The adsorption potential of the composite was studied for simultaneous sorption behavior of Zn(Ⅱ) and Cu(Ⅱ) ions in a batch system. Chitosan and hydroxyapatite(HAP) were extracted from shrimp shell and bone ash,respectively, so this is a low cost natural composite. To prepare the composite, chitosan was dissolved in acetic acid, then HAP and snail shell powders were added to the chitosan solution. The morphology and characterization of the composite was studied by SEM and EDX analysis. Atomic adsorption was used to measure the amount of the ions. Experimental parameters were optimized with Design Expert Software and five parameters such as the concentration of ions, p H, adsorbent amount and contact time were studied at room temperature. Optimized value for the parameters of Zn(Ⅱ) and Cu(Ⅱ) concentrations, p H, adsorbent dose, and contact time were 3.01 mg·L~(-1), 5.5, 0.02 g and 95 min, respectively. The adsorption isotherms for Zn(Ⅱ) and Cu(Ⅱ) showed Langmuir and Tempkin, respectively. Kinetic and equilibrium studies showed the experimental data of Zn(Ⅱ) and Cu(Ⅱ) ions were best described by the pseudo-second-order model. Studies on thermodynamic show the adsorption process were physical and spontaneous.     

Improving the Pressurized Flushing Efficiency in Reservoirs: an Experimental Study

Sediment flushing in many reservoirs of the world is accomplished with low efficiency. In this study, a new configuration was proposed for reservoir bottom outlet to increase the pressurized flushing efficiency. In the new configuration, a projecting semi-circular structure was connected to the upstream edge of bottom outlet. It was observed that by employing the projecting bottom outlet, the sediment removal efficiency increased significantly compared to the flushing via typical bottom outlet. In the case of new-configuration bottom outlet with L _sc /D _outlet  = 5.26 and D _sc /D _outlet  = 1.32, the dimensionless length, width and depth of flushing cone increased 280%, 45% and 14%, respectively, compared to the reference test. The proposed structure can ensure the sustainable use of reservoirs.     

Using the genetic algorithm to enhance nonnegative matrix factorization initialization

Nonnegative matrix factorization (NMF) algorithms have been utilized in a wide range of real applications; however, the performance of NMF is highly dependent on three factors including: (1) choosing a problem dependent cost function; (2) using an effective initialization method to start the updating procedure from a near‐optimal point; and (3) determining the rank of factorized matrices prior to decomposition. Due to the nonconvex nature of the NMF cost function, finding an analytical‐based optimal solution is impossible. This paper is aimed at proposing an efficient initialization method to modify the NMF performance. To widely explore the search space for initializing the factorized matrices in NMF, the island genetic algorithm (IGA) is employed as a diverse multiagent search scheme. To adapt IGA for NMF initialization, we present a specific mutation operator. To assess how the proposed IGA initialization method efficiently enhances NMF performance, we have implemented state‐of‐the‐art initialization methods and applied to the Japanese Female Facial Expression dataset to recognize the facial expression states. Experimental results demonstrate the superiority of the proposed approach to the compared methods in terms of relative error and fast convergence.     

The Shape Boltzmann Machine: A Strong Model of Object Shape

A good model of object shape is essential in applications such as segmentation, detection, inpainting and graphics. For example, when performing segmentation, local constraints on the shapes can help where object boundaries are noisy or unclear, and global constraints can resolve ambiguities where background clutter looks similar to parts of the objects. In general, the stronger the model of shape, the more performance is improved. In this paper, we use a type of deep Boltzmann machine (Salakhutdinov and Hinton, International Conference on Artificial Intelligence and Statistics, 2009) that we call a Shape Boltzmann Machine (SBM) for the task of modeling foreground/background (binary) and parts-based (categorical) shape images. We show that the SBM characterizes a strong model of shape, in that samples from the model look realistic and it can generalize to generate samples that differ from training examples. We find that the SBM learns distributions that are qualitatively and quantitatively better than existing models for this task.     

An analytical framework for event mining in video data

With the high availability of digital video contents on the internet, users need more assistance to access digital videos. Various researches have been done about video summarization and semantic video analysis to help to satisfy these needs. These works are developing condensed versions of a full length video stream through the identification of the most important and pertinent content within the stream. Most of the existing works in these areas are mainly focused on event mining. Event mining from video streams improves the accessibility and reusability of large media collections, and it has been an active area of research with notable recent progress. Event mining includes a wide range of multimedia domains such as surveillance, meetings, broadcast, news, sports, documentary, and films, as well as personal and online media collections. Due to the variety and plenty of Event mining techniques, in this paper we suggest an analytical framework to classify event mining techniques and to evaluate them based on important functional measures. This framework could lead to empirical and technical comparison of event mining methods and development of more efficient structures at future.     

An improved Differential Evolution algorithm using learning automata and population topologies

A new variant of Differential Evolution (DE), called ADE-Grid, is presented in this paper which adapts the mutation strategy, crossover rate (CR) and scale factor (F) during the run. In ADE-Grid, learning automata (LA), which are powerful decision making machines, are used to determine the proper value of the parameters CR and F, and the suitable strategy for the construction of a mutant vector for each individual, adaptively. The proposed automata based DE is able to maintain the diversity among the individuals and encourage them to move toward several promising areas of the search space as well as the best found position. Numerical experiments are conducted on a set of twenty four well-known benchmark functions and one real-world engineering problem. The performance comparison between ADE-Grid and other state-of-the-art DE variants indicates that ADE-Grid is a viable approach for optimization. The results also show that the proposed ADE-Grid improves the performance of DE in terms of both convergence speed and quality of final solution.