Quantum key agreement with EPR pairs and single-particle measurements

In this paper, we present a QKA protocol with the block transmission of EPR pairs. There are several advantages in this protocol. First, this protocol can guarantee both the fairness and security of the shared key. Second, this protocol has a high qubit efficiency since there is no need to consume any quantum state except the ones used for establishing the shared key and detecting eavesdropping. In addition, this protocol uses EPR pairs as the quantum information carriers and further utilizes single-particle measurements as the main operations. Therefore, it is more feasible than the protocols that need to perform Bell measurements. Especially, we also introduce a method for sharing EPR pairs between two participants over collective-dephasing channel and collective-rotation channel, respectively. This method is meaningful since sharing EPR pairs between two participants is an important work in many quantum cryptographic protocols, especially in the protocols over non-ideal channels. By utilizing this method, the QKA protocols, which are based on EPR pairs, can be immune to these kinds of collective noise.     

Finite-time control for discrete-time Markovian jump systems with deterministic switching and time-delay

In this paper, the finite-time control problem is investigated for a class of discrete-time Markovian jump systems (MJLSs) with deterministic switching and time-delay. The considered systems are subject to a piecewise-constant transition probability (TP) matrix, which leads to both the deterministic switches and stochastic jumps. First, the stochastic finite-time boundedness (SFTB) and l ₂ gain analysis for the systems are studied by employing the average dwell time (ADT) approach. Note that a finite-time weighted l ₂ gain is obtained to measure the disturbance attenuation level. Then, the mode-dependent and variation-dependent controller is designed such that the resulting closed-loop systems are stochastically finite-time bounded and have a guaranteed disturbance attenuation level. Finally, a numerical example is given to verify the potential of the developed results.     

Stochastic reliable control of a class of networked control systems with actuator faults and input saturation

The stochastic reliable control problem for networked control systems (NCSs) subject to actuator failure and input saturation is investigated in this paper. In order to get the relationship between the maximum allowable consecutive packet dropouts, the packet dropout probability, the actuator failure matrix and the input saturation, a packet dropout probability dependent condition is given via linear matrix inequality (LMI) technology. Then, a suitable reliable controller is designed to ensure the closed-loop system to be exponentially mean square stable against actuator failures and input saturation. Finally, numerical examples are provided to show the effectiveness of the proposed method.     

对位取代酚钾与10′10′-二烃基-9,9′-联二吖啶盐电荷转移光谱的研究

对位取代酚钾与１０′１０′－二烃基－９，９′－联二啶盐电荷转移光谱的研究宋化灿＊＊英柏宁郑祥礼（中山大学化学系，广州５１０２７５）关键词硝酸１０，１０′－二烃基－９，９′－联二啶盐，对位取代酚钾，电荷转移络合物，电子亲合能１０，１０′－二烃基－９，９...     

基于贪婪路由协议的动态单/多链路故障恢复策略

针对现有的贪婪方法不能有效处理拓扑结构中链路故障的问题,提出单链路故障和多链路故障本地化恢复策略。首先,通过利用克莱因伯格的贪婪嵌入给出单链路故障恢复策略;然后,将其扩展到多链路故障的情况;最后,在基于Python/C++的仿真环境下对提出的技术进行评估。实验结果表明,该技术仅需要非常有限的资源,且造成的路由质量损耗也有限,可以实现快速切换,可依网络生成树中链路数目扩展。该技术的可扩展性、简单性和低开销使其适合于大型网络。     

EVOH／有机蒙脱土插层复合材料的制备与表征

将经有机化处理过的蒙脱土与EVOH熔融共混制备插层复合材料，并对该复合材料进行了XRD分析，分析结果表明：聚合物基体已经插入了有机蒙脱土片层间；复合体系中蒙脱土含量越小，蒙脱土被插开的片层间距越大；当复合体系中有机蒙脱土含量≤8％时，形成剥离型复合材料；当有机蒙脱土含量在8％～15％时，形成插层型复合材料；当有机蒙脱土含量大于15％时，复合材料中蒙脱土片层间距无明显变化。对EVOH与蒙脱土熔融共混过程的扭矩分析表明：该复合材料熔融混合9min之后，达到均匀混合和完全塑化的状态。     

网络边布局技术研究综述

网络边布局技术是网络可视化研究的重要内容,良好的边布局能够有效地展示网络的整体结构并从中揭示出某些隐含的信息模式.为了全面地总结和分析现有网络边布局技术,首先归纳了网络边布局的主要任务,回顾了指导网络边布局的美学标准.然后将网络边布局技术归纳为3类:边路由技术、边融合技术和边集束技术,分别阐述了各类技术中典型布局方法的主要原理和特征,并重点对边集束技术进行了分类分析.最后总结了目前研究中还存在的一些问题,展望了网络边布局技术的发展前景和面临的挑战,以期为相关领域的研究者提供有益参考.     

一种支持细粒度并行的SDN虚拟化编程框架

软件定义网络(software defined network,简称SDN)通过集中式的控制器提高了网络的可编程性,成为近年来网络领域非常热门的话题。以Openflow网络为代表的软件定义网络将逻辑控制与数据转发相隔离,为网络虚拟化技术提供了良好的平台。集中式的抽象与控制使得SDN虚拟化框架的处理效率成为主要瓶颈。现有的SDN虚拟化框架由于缺乏对细粒度并行的支持,为编程人员充分利用多核/众核资源、控制更大规模的网络带来了极大的挑战。为了提高SDN虚拟化框架的处理效率,提出一种新的SDN虚拟化编程框架,通过新颖的API和运行时,在框架内部支持细粒度的并行处理。该框架通过对网络中流和网络资源进行抽象,使开发人员可以直接通过划分流空间来定义不同的虚拟网络,利用无锁的编程方式对共享的网络资源和流进行操作。实验结果表明,该框架在逻辑控制的执行效率方面具有良好的可扩展性,可以创建出更大规模的虚拟网络,并对其进行更为复杂的控制。     

镍磷合金镀液稳定性的探讨

在电镀过程中，含亚磷酸的镍磷合金镀液的ＰＨ值和Ｎｉ＾２＋离子浓度随电镀时间的延长而增大。本文分析其原因，并提出采用不溶性阳极与可溶性阳极配合或交替地使用。可使镀液ＰＨ和Ｎｉ＾２＋离子浓度稳定。     

热压氮化硅在1200℃的高温疲劳损伤

研究了热压氮化硅陶瓷的室温和高温力学性能及在１２００℃的高温疲劳损伤行为，发现材料的弹性模量、抗变强度与断裂韧性均随温度升高而下降，但在１０００℃以上降低最为显著。在１２００℃高温疲劳寿命与应力之间符合单对数线性关系经分析发现这种现象与失效的热激活过程有关。通过对实验数据，ＸＲＤ相结构、变形动力学过程和断口的微观分析证明，陶瓷高温疲劳失效机理为“杂质空穴复合作用机制”。对热压氮化硅来说，失效机理主