一种低压低功耗SRAM/SOI单元设计

提出一种改进4管自体偏压结构SRAM/SOI单元.基于TSUPREM4和MEDICI软件的模拟和结构性能的分析,设计单元结构并选取结构参数.该结构采用nMOS栅下的含p+埋沟的衬底体电阻代替传统6管CMOSSRAM单元中的pMOS元件,具有面积小、工艺简单的优点.该结构可以在0.5V的电源电压下正常工作,与6管单元相比,该单元瞬态响应正常,功耗只有6管单元的1/10,满足低压低功耗的要求.     

准噶尔盆地加快天然气勘探有利条件及预探领域分析

准噶尔盆地天然气资源十分丰富,勘探潜力巨大。该盆地具备形成大气区的地质背景,发育石炭系、二叠系、侏罗系三套气源岩,演化程度高,气源条件充足;发育多类型、多套储集体和四套区域盖层,形成了有利的储盖组合及成藏配置。通过对五彩湾、滴西、莫索湾、莫北地区典型气藏的分析研究,该盆地发育多种气藏类型,包括构造型、古潜山型、火山岩内幕型及地层(不整合遮挡)型。通过研究指出,天然气勘探的现实领域有陆东—五彩湾地区、陆西—莫北—莫索湾地区;待突破的领域有腹部下组合大型古隆起及岩性气藏、南缘冲断带;正在准备的勘探领域主要为煤层气。     

应用改进的BP神经网络预测导弹的研制费用

结合导弹武器系统研制的特点，分析并确定了影响导弹武器系统研制费用的主要因素，并在前人研究的基础上，提出了基于改进的BP神经网络的费用预测模型。该模型不仅克服了以往由于专家主观因素而造成的负面影响，而且提高了算法的运行效率和模型的预测精度。通过具体的实例分析比较，充分证明了利用该方法的科学合理性。最后探讨了利用BP神经网络进行数值预测的方法和应该注意的问题，并给出了一些有益的建议。     

正交试验在摩擦焊工艺参数优化中的应用

通过正交试验得出摩擦焊工艺参数中对接头抗拉强度的影响的顺序是摩擦压力、顶锻压力、摩擦时间。为在生产实际中制定摩擦焊接工艺规范提供了重要的参考依据。     

污水泵站自动控制系统的改造

简要介绍了原有污水泵站自动控制系统在结构和控制方面所存在的问题,并以此为基础,分别从系统的结构、各泵站的自动控制、通信网络结构和中央控制室等方面,对改造后的污水泵站自动控制系统的设计方案和实施手段进行了重点介绍。     

Statistics of mesoplasma channel formation upon thermal breakdown stabilization in thin semiconductor films

A phenomenological model of the development of thermal breakdown in semiconductor films is considered, and it is shown that the average number of mesoplasma channels experimentally observed in the regime of thermal breakdown stabilization can substantially vary. The probability distribution function for the number of such luminous channels arising as a result of thermal fluctuations in a thin semiconductor film is calculated within the framework of a simple approximation.     

A Computerized Monitoring and Control System for the Gas-Mixture Preparation Complex for Experiments on Muon-Catalyzed Fusion

A computerized system for monitoring and controlling the gas-mixture preparation complex of the TRITON installation is described. The installation is designed for experimental investigations of muon-catalyzed fusion in triple mixtures of hydrogen isotopes H/D/T over wide ranges of temperature and pressure. The system is used to control the entire complex of gas-mixture preparation, the target parameters, and the gas-mixture composition, as well as to carry out radiation monitoring. Good performance characteristics, the high reliability of the system, and the possibility of its rapid adaptation to new tasks have been demonstrated in physics experiments.     

结构参量对脉冲高斯光束布拉格衍射特性的影响

利用二维耦合波理论,研究了体光栅对时间和空间都为高斯型分布的脉冲激光光束的衍射性质,得到了衍射和透射光振幅的解析表达式.讨论了体光栅的结构参量对衍射光束的空间和频谱强度分布以及衍射效率的影响.结果表明,体光栅的波长选择带宽和衍射光束带宽随着结构参量的增大而增大,衍射效率随着入射脉冲时间宽度的增大而增大,并趋于定值,结构参量值越小,达到饱和的速度越慢,饱和值越大.     

Temperature effect on the formation of a relief of diamond-like carbon coatings and its modification by ion bombardment

Diamond-like coatings (DLCs) have been obtained on a UVNIIPA-001 unit employing the method of pulse arc sputtering of a graphite target. DLCs of about 1.5 μm thick were applied onto substrates of the R6M5 steel. The relief of the coatings that were deposited using different temperature regimes has been studied. It has been established that a temperature rise of the surface of a growing DLC (condensation at a high frequency of arc pulses f) leads to the growth of films with numerous protrusions on their surface. The deposition of films at a low frequency f is more preferable to form smooth and hard DLCs under the conditions of unfiltered beam of carbon ions. The modification of the surface of diamond-like carbon coatings after their application has been investigated upon bombardment with accelerated ions of inert gas (argon) or chemically active oxygen. It has been established that the argon-ion bombardment is more preferable to smooth out the DLC relief. It has been shown that the relief of DLCs must be taken into account when measuring their microhardness, whereas the transformation of interatomic bonds in the near-surface layers after ion irradiation should be taken into consideration when analyzing the coatings by the methods whose informative depth is several monolayers.     

Efficient 3-d capacitance extraction considering lossy substrate with multilayered green's function

An efficient algorithm for extraction of three-dimensional (3-D) capacitance on multilayered and lossy substrates is presented. The new algorithm presents a major improvement over the quasi-3-D approach used in a Green's function-based solver and takes into consideration the sidewalls of 3-D conductors. To improve the efficiency of the computation and the transformation of the Green's function, a nonuniform grid is adopted. The most computationally intensive part in the transformation of the Green's function is computed separately as technology-independent matrices Tk foremost. Once computed, Tk can be stored and used for any technology, thus the storage requirement and computational complexity are reduced from O (S/sup 2/) and O (S/sup 2/ log S/sup 2/), respectively, to just O [(log S/sub max/)/sup 2/]. Extensive tests have been performed to verify the new algorithm, and its accuracy has been established by comparing with other programs.