Verifying anonymity in voting systems using CSP

We present formal definitions of anonymity properties for voting protocols using the process algebra CSP. We analyse a number of anonymity definitions, and give formal definitions for strong and weak anonymity, highlighting the difference between these definitions. We show that the strong anonymity definition is too strong for practical purposes; the weak anonymity definition, however, turns out to be ideal for analysing voting systems. Two case studies are presented to demonstrate the usefulness of the formal definitions: a conventional voting system, and Prêt à Voter, a paper-based, voter-verifiable scheme. In each case, we give a CSP model of the system, and analyse it against our anonymity definitions by specification checks using the Failures-Divergences Refinement (FDR2) model checker. We give a detailed discussion on the results from the analysis, emphasizing the assumptions that we made in our model as well as the challenges in modelling electronic voting systems using CSP.     

Test-data generation for control coverage by proof

Many tools can check if a test set provides control coverage; they are, however, of little or no help when coverage is not achieved and the test set needs to be completed. In this paper, we describe how a formal characterisation of a coverage criterion can be used to generate test data; we present a procedure based on traditional programming techniques like normalisation, and weakest precondition calculation. It is a basis for automation using an algebraic theorem prover. In the worst situation, if automation fails to produce a specific test, we are left with a specification of the compliant test sets. Many approaches to model-based testing rely on formal models of a system under test. Our work, on the other hand, is not concerned with the use of abstract models for testing, but with coverage based on the text of programs.     

Novel positive‐working aqueous‐base developable photosensitive polyimide precursors based on diazonaphthoquinone‐capped polyamic esters

Novel positive‐working aqueous‐base developable photosensitive polyimide (PSPI) precursors based on partially diazonaphthoquinone (DNQ)‐capped polyamic esters bearing phenolic hydroxyl groups and a DNQ photosensitive compound (PIC‐3) were developed. The partially DNQ capped polyamic esters were prepared from an esterification reaction of 1,2‐naphthoquinone diazide‐5‐sulfonyl chloride with the polyamic esters. The partially DNQ capped polyamic esters decreased the dark film loss effectively in the aqueous‐base developer and were able to make thicker film resists compared to the uncapped polyamic esters. The 25 mol % DNQ‐capped BisAPAF–PMDA polyamic ester and BisAPAF–ODPA polyamic ester containing 25 wt % PIC‐3 photosensitive compound showed a sensitivity of 176 and 185 mJ/cm², and a contrast of 1.68 and 1.02, respectively, in a 3‐μm film with 1.25 wt % tetramethylammonium hydroxide developer. A pattern with a resolution of 5 μm was obtained from both PSPI precursor compositions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2293–2300, 2003     

Reactive Laser Ablation Synthesis of Nanosize Alumina Powder

An aluminum (Al) target was laser ablated in an oxygen (O₂) atmosphere, producing nanosize alumina (Al₂O₃) powder. The powder surface area decreased (and the particle size increased) with both increasing oxygen pressure and laser fluence. All powders produced had surface areas between 135 and 250 m²/g, corresponding to primary particle sizes ranging from 7 to 3 nm in radius. Phase evolution with temperature was studied via X-ray diffraction. These powders showed a direct transformation from γ- to α-alumina at approximately 1200°C, bypassing other transition alumina phases, while still maintaining small particle size ( 30 nm). Despite the nanosize particles, green densities equal to 54% of the skeletal density (i.e., true density of the solid phase) were obtained by uniaxial pressing at 40 MPa.     

Synthesis and electrochemical characteristics of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion batteries

LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials have been coated with Al₂O₃ nano-particles using sol-gel processing to improve its electrochemical properties. The X-ray diffraction (XRD) pattern of the as-prepared Al₂O₃ nano-particles was indexed to the cubic structure of the γ-Al₂O₃ phase and had an average size of ∼4 nm. The XRD showed that the structure of LiNi_1/3Co_1/3Mn_1/3O₂ was not affected by the Al₂O₃ coating. However, the Al₂O₃ coatings on LiNi_1/3Co_1/3Mn_1/3O₂ improved the cyclic life performance and rate capability without decreasing its initial discharge capacity. These electrochemical properties were also compared with those of LiAlO₂-coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode material. The electrochemical impedance spectroscopy (EIS) was studied to understand the enhanced electrochemical properties of the Al₂O₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ compared to uncoated LiNi_1/3Co_1/3Mn_1/3O₂.     

Reactive Laser Ablation Synthesis of Nanosize Aluminum Nitride

An aluminum (Al) target was laser ablated in a nitrogen (N₂) atmosphere, producing aluminum nitride (AlN) powder. These powders were calcined at 900°C for 2 h. Powders were produced at various nitrogen pressures, and the calcined powders were tested for unreacted aluminum content, using differential thermal analysis (DTA). The AlN powder, produced at a laser fluence of 12 J/cm² and a nitrogen pressure of 10.0 kPa (75 torr), showed no evidence of unreacted aluminum by DTA and was phase-pure AlN by X-ray diffraction (XRD). The surface area of this powder is 82 m²/g, corresponding to a particle size of ∼11 nm, which is in good agreement with TEM observations.     

CO2 Retention in High-Alkali Borate Glasses

A study of the high-alkali region of glass formation in the system Na₂O +B₂O₃ reveals that retention of CO₂ from carbonate starting materials can become a serious preparative problem at the high-alkali extreme. Results presented for glasses prepared using both Na₂O and Na₂CO₃ show that residual CO₂ can lead to major differences in physical properties which in this work are represented by the viscosity-related glass transition temperature .     

Designing for reportability: sustainable gamification,public engagement,and promoting environmental debate

There is a growing emphasis in many countries on matters such as participation in e-government, e-democracy, the provision of forums for online debate, and so on. A critical issue in all of these cases is one of encouraging engagement across a broad spectrum of potentially interested parties and stakeholders. In this paper, we use an ethnographic study of an online event, designed to encourage debate, to explore some critical issues in how the mechanisms productive of debate have shifted in company with the Web 2.0 phenomenon. By contrasting this with a prior study of how players managed their gameplay in a multiplayer pervasive game, we focus upon how different ways of constructing games and events can have serious implications for their ordinary everyday reportability in routine face-to-face interactions. We conclude that designing for reportability should be an active consideration when designing the resources for online debate and consider some ways in which that might be accomplished.     

A novel synthesis method for the preparation of aromatic poly(imide benzoxazole) from trimellitic anhydride chloride and bis(o‐aminophenol)

A poly(imide benzoxazole) was prepared directly from trimellitic anhydride chloride and 2,2‐bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane (BisAPAF) monomers in a two‐step method. In the first step, a poly(hydroxyamide amic acid) precursor was synthesized by the low‐temperature solution polymerization in an organic solvent. Subsequently, thermal cyclodehydration of the poly(hydroxyamide amic acid) precursor at 350°C produced the corresponding poly(imide benzoxazole). The inherent viscosity of the precursor polymer was 0.22 dL/g. The cyclized poly(imide benzoxazole) showed a glass transition temperature (T_g) at 329°C and a 5% weight loss temperature at 530°C in nitrogen and at 525°C in air. The poly(imide benzoxazole) is amorphous as evidenced by the wide‐angle X‐ray diffraction measurement. The structures of the precursor polymer and the fully cyclized polymer were characterized by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance spectroscopy (¹H NMR). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2388–2391, 2003     

Barley Protein Isolate: Thermal, Functional, Rheological, and Surface Properties

Barley protein isolate (BPI) was extracted in 0.015 N NaOH in a 10:1 ratio solvent:flour and was precipitated by adjusting the pH to 4.5 and freeze-dried. The thermal properties of BPI were determined using modulated differential scanning calorimetry (MDSC). BPI with 4% moisture content exhibited a glass transition (T _g) with 140 °C onset, 153 °C middle, and 165 °C end temperatures and a ΔC _p of 0.454 J/g per °C. The high moisture content sample (50%) showed a T _g at 89, 91, or 94 °C and 0.067 ΔC _p. Acetylation had no apparent effect on the foaming and emulsifying properties of protein from barley flour but exhibited the least-stable foam among BPI samples. Foaming capacities of both barley protein isolates were ∼12% less than that of acid-precipitated soy protein isolate reported in the literature. Acetylated BPI showed the highest surface hydrophobicity compared to the other samples. The surface-tension test confirmed that unmodified and modified BPI possessed surface activity. BPI phosphorous oxycloride-crosslinked was the most effective in lowering the surface tension of aqueous NaCl, while the crosslinked BPI was the least effective. The G′ value of BPI suspension was greater than G″ at all frequencies from 0.1 to 100 rad/s. The strain value at which linear behavior ceased and nonlinear behavior began ranged from 3 to 10%. Names are necessary to report factually on available data; however, the United States Department of Agriculture (USDA) neither guarantees nor warrants the standard of the product, and the use of the name by the USDA implies no approval of the product to the exclusion of others that may also be suitable.