Novel analysis of the size and orientation dependent resonance phenomenon of the microstrip line coupled complementary split‐ring resonator

The purpose of this article is to provide a comprehensive investigation on the resonance phenomenon of microstrip line coupled complementary split‐ring resonator (CSRR) with different orientation and relative size. It is shown that when the relative size of the CSRR is smaller than the host line, the CSRR with its slit oriented orthogonal to the line axis will not excite effectively and show weak resonance behavior. However, when the slit is positioned along the line axis, the cross‐polarization effect comes into play, which excites the CSRR through the mixed coupling. To ensure the correctness, several numerical simulations are carried out for different substrate height and relative permittivity. Finally, a prototype is fabricated and measured for the experimental validation.     

Compression artifacts reduction with multiscale tensor regularization

Multidimensional Systems and Signal Processing - We study a multiscale tensor regularization based JPEG decompression artifact removal in digital images. Structure tensor eigenvalues based robust...     

Polymers from renewable resources: Kinetics studies of the radiochemical graft copolymerization of styrene onto cellulose extracted from pine needles and the effect of some additives on the grafting parameters in an aqueous medium

In an attempt to develop an alternative to petro‐based polymers, we graft‐copolymerized cellulose isolated from the needles of Pinus roxburghii with styrene in a limited aqueous medium in air by simultaneous irradiation using gamma rays as the initiator. The optimum conditions for obtaining maximum grafting were determined as a function of monomer concentration, total dose of irradiation, and amount of water. Maximum percentage of grafting (P_g; 79.9) was obtained at a total dose of 1.152 × 10⁴ Gy with 1.325 × 10^?4 mol of styrene. The effect of methanol, LiNO₃, Cu(NO₃)₂, Mohr's salt, H₂SO₄, HNO₃, and AcOH on P_g was studied. All the additives were found to decrease graft yield, contrary to some reported studies. Total percentage conversion and rates of polymerization, grafting, and homopolymerization were evaluated. Evidence of grafting was provided by the characterization of cellulose and its graft copolymers by Fourier transform infrared spectroscopy, thermogravimetry, and observation of the swelling behavior in some solvents. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1490–1500, 2002     

Pressurised flash drying of Yallourn lignite

A previously developed 1D model of lignite drying for pulverised lignite feeding into a conventional pulverised fuel boiler during the coal milling process is applied to lignite in an entrained flow configuration at elevated pressure. A combustor fired with diesel and air was used to produce a flue gas at 800 °C and 10 atm to flash dry Yallourn lignite at a nominal feed rate of 725 kg/h along a 50 m duct. A coal feeder arrangement was also developed which provides a simple positive feeding device for feeding against a back pressure. The feeder takes as an input coal which is nominally <50 mm and discharges it as a finely divided product with a mean particle size of approximately 1.0-1.5 mm. The comparison between model predictions and measured temperature profiles for the flue gas and final moisture content of the dried coal product showed excellent agreement. Coal moisture was reduced from 67 wt% to between 30 and 40 wt%, depending upon on the coal feed rate and particle size. The small variation in the final outlet temperature observed between the model and experimental results is due to heat losses from the exposed duct work to the environment.     

A study of the synthesis,kinetics, and characterization of reactive graft copolymers of poly(vinyl imidazole) and cellulose for use as supports in enzyme immobilization and metal ion uptake

In continuation to our earlier work to use bioresource for developing alternate materials for use at the interface of biotechnology and polymer science, we have utilized pine needles as a renewable stock of cellulose to synthesize graft copolymers of vinyl imidazole. Kinetics of N‐VIm by simultaneous γ‐irradiation method has been investigated as a function of total dose, monomer concentration, and amount of water. Effect of water–methanol solvent composition on graft yields and polymerization kinetics has also been studied at the optimum grafting conditions of the total dose and monomer concentration. Effect of some additives such as ZnCl₂, Mohr salt, tetramethylethylene diamine, potassium persulfate, ammonium persulfate as grafting accelerators and promoters has also been studied. Graft copolymers have been characterized by elemental analysis, FTIR, and swelling studies. The graft copolymers have been used as supports for metal ions sorption, enzyme immobilization, and as potential biomimicking catalysts. Sorption behavior of Fe²⁺ ions and Cu²⁺ ions and the immobilization of bovine serum albumin and protease as a function of graft yield has been reported. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1522–1530, 2006     

Solid acid (superacid) catalyzed regioselective adamantylation of substituted benzenes

Adamantylation of substituted benzenes with 1-bromo-adamantane was catalyzed by solid acids including acidic ion exchange and ionomer resins, HY zeolite, sulfated zirconia and supported superacids on HY zeolite and SiO₂. Adamantylation generally takes place in excellent yield giving predominantly para products without formation of byproducts. The reactions did not require the usual workup of Friedel-Crafts reactions as catalysts were simply filtered of. Cross-linked polystyrene resin sulfonic acid (Amberlyst) was found particularly suitable as besides its high catalytic activity, high regioselectivity was observed with almost exclusive formation ofp-adamantylated benzenes. AMI, PM3 and MNDO semiempirical calculations of heats of formation showed that of all regioisomers, the para isomer is the most stable. The temperature dependence of adamantylation was also investigated allowing the optimization ofp-substituted product in high yield and excellent selectivity. Lack of isomerization of 1-p-tolyla-damantane using solid (Amberlyst, Nafion-H) and liquid acids (neat and modified trifluoromethanesulfonic acid) indicates absence of product isomerization, while the intramolecular rearrangement of the intermediate arenium complex is still possible.Catalysis by solid superacids, Part 30. For part 29, see ref.[1A].     

Nanotechnology and health safety--toxicity and risk assessments of nanostructured materials on human health

The field of nanotechnology has recently emerged as the most commercially viable technology of this century because of its wide-ranging applications in our daily lives. Man-made nanostructured materials such as fullerenes, nanoparticles, nanopowders, nanotubes, nanowires, nanorods, nanofibers, quantum dots, dendrimers, nanoclusters, nanocrystals, and nanocomposites are globally produced in large quantities due to their wide potential applications, e.g., in skincare and consumer products, healthcare, electronics, photonics, biotechnology, engineering products, pharmaceuticals, drug delivery, and agriculture. Human exposure to these nanostructured materials is inevitable, as they can enter the body through the lungs or other organs via food, drink, and medicine and affect different organs and tissues such as the brain, liver, kidney, heart, colon, spleen, bone, blood, etc., and may cause cytotoxic effects, e.g., deformation and inhibition of cell growth leading to various diseases in humans and animals. Since a very wide variety of nanostructured materials exits, their interactions with biological systems and toxicity largely depend upon their properties, such as size, concentration, solubility, chemical and biological properties, and stability. The toxicity of nanostructured materials could be reduced by chemical approaches such by surface treatment, functionalization, and composite formation. This review summarizes the sources of various nanostructured materials and their human exposure, biocompatibility in relation to potential toxicological effects, risk assessment, and safety evaluation on human and animal health as well as on the environment.     

Ambient- and High-Temperature Properties of Titanium Carbide–Titanium Boride Composites Fabricated by Transient Plastic Phase Processing

Ambient- and high-temperature properties of a class of titanium carbide-titanium boride composites that have been produced by transient plastic phase processing are presented. The composites produced are comprised of Ti₃B₄, TiB₂, and TiC_0.65 at their equilibrium composition (34.5, 30.5, and 34.9 vol%, respectively), and the Ti₃B₄ phase in these composites occurs either as equiaxed grains or as platelets, depending on the starting mixture composition. Measurements of the ambient- and high-temperature flexure strength and fracture toughness, thermal shock susceptibility, oxidation resistance, and wear resistance of this class of composites are presented. The role of various microstructural parameters—such as the morphology of the Ti₃B₄ phase, the length scale of the microstructure, and the volume fraction of borides—on these properties has been identified.