三维PDP放电过程数值模拟软件

介绍了三维PDP放电过程模拟软件，该软件可较真实地反映放电单元的实际情况，对放电性能进行优化设计，且具有通用性强、界面友好、使用方便、功能完善等特点。可对不同结构、不同气体成份、不同驱动电压及波形等情况进行计算。     

带有块间串扰MC-CDMA的时域信道估计和多用户检测

本文把带有IBI的MC-CDMA系统等效解释为特殊的直接序列码分多址（DS-CDMA）系统，并给出了相应的时域信道估计方法和时域线性最小均方误差（MMSE）多用户检测方法。仿真实验表明了本文方法的性能。     

浅谈变频器供电条件下电动机的温升与对策

随着变频调速技术的蓬勃发展，变频器供电电机的温升问题已引起人们的广泛关注。本文首先讨论了电动机的温升限度；然后结合感应电机温升实验的相关数据分析了变频器供电对电动机温升的影响及其原因；最后从降低发热量和提高散热能力两方面提出缓解电机温升的措施，并指出了实际应用中应注意的问题。     

CMOS图像传感器在视频监控系统中的应用

介绍了CMOS图像传感器的工作原理、总体结构,并具体介绍了一种CMOS图像传感器MT9M001的内部结构、特点及应用.在此基础上给出了CMOS图像传感器MT9M001在视频监控系统中的具体应用实例.该设计在低成本的条件下具有图像质量好、图像分辨率高等显著特点,具有较宽的应用范围和较高的研究价值.     

Synthesis and aqueous solution behaviors of sodium sulfonate‐terminated dendritic poly(ester‐amine)

Sodium sulfonate‐terminated dendritic poly(ester‐amine) (SPEA) was synthesized by sulfonation of acrylic double bond‐terminated dendritic poly(ester‐amine) (APEA) with sodium hydrogen sulfite (NaHSO₃) in mixture of diglycol and 2‐butanone under normal pressure. The structure of SPEA was characterized by IR, ¹H‐NMR, and elemental analysis. SPEA was water‐soluble. 1.0–40.0% (mass) SPEA aqueous solutions appeared as dilatant fluid. When pH value varied from 1.5 to 12.0, the viscosity of 1–5% (mass) SPEA aqueous solutions changed very small, and the electric conductivity almost kept stable within pH 3.0–10.0. The relationship between the viscosity and the concentration of SPEA water solutions was similar to that of NaCl water solutions. The surface tension of SPEA water solutions was lower than that of polyethylene glycol 2000 water solutions with the same concentration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Green and self-lubricating polyoxymethylene composites filled with low-density polyethylene and rice husk flour

Polyoxymethylene (POM) composites filled with low-density polyethylene (LDPE) and rice husk flour (RHF) were prepared by injection molding. The POM/5 wt % LDPE/7.5 wt % RHF composite exhibited the lowest wear rate, whereas the coefficient of friction remained low, and the POM/5 wt % LDPE/5 wt % RHF composite had the best mechanical properties. X-ray diffraction analysis was carried out, and the worn surfaces were examined with scanning electron microscopy. The results showed that the addition of the filler reduced the crystallinity degree of the POM composites. The main wear mechanism for unfilled POM was adhesion, whereas for the POM composites, wear seemed to occur mainly by fatigue and abrasion. It was experimentally confirmed that the POM composite filled with LDPE and RHF, which is well-performing, low-cost, and environmentally friendly, could be a potential material for tribological applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

饮用水中挥发性三卤甲烷(THM)_s测定方法的改进

本文使用吹扫捕集法来前处理水样,用带有电子捕获检测(ECD)的气相色谱仪来测定水中三卤甲烷(THM)_s。水样加标回收率在85%～115%之间,相对标准偏差在5%左右。实验结果表明,该法具有简单、快速、灵敏的特点。     

胨冻样芽孢杆菌(Bacillus mucilaginosus)对烟草灰霉病菌(Botrytis cinerea)的抑制作用

本文首次报道胨冻样芽孢杆菌XDB1和D4B1对烟草灰霉病菌(Botrytis cinerea)的抑制作用。实验表明,XDB1和D4B1的发酵原液和无细胞提取物具有相同的抑菌效果,而经121℃处理30分钟后,抑菌活性丧失。D481菌株的抑菌活性高于XDB1,钾长石作为基质时的活性高于土壤矿物。但是,XDB1和D481对立枯丝核病菌(R..solani)、西瓜尖孢镰刀菌(F.oxysporum)、腐霉(Pythium sp)、小麦全蚀病菌(G.graminis)、烟炭疽病菌(C.gloeosporides)、烟草赤星病菌(A.alternata)、烟草黑胫病菌(P.nicotianae、串珠镰刀病菌(F.moniliforme)和水稻稻瘟病菌(P.grisea)无抑制作用。     

以硅氧烷醇锂为催化剂的氟硅生胶的合成

介绍了单体三氟丙基甲基环三硅氧烷通过硅氧烷醇锂催化剂聚合成氟硅生胶,讨论了不同催化剂及其用量,原料中水分含量、不同乙烯基含量对氟硅生胶分子量的影响.