Shear viscosity of the B phase of superfluid3He

The shear viscosity (T) in the Balian-Werthamer (BW) state of superfluid ³ He is calculated variationally throughout the region 0t 1(t=T/T _c) from the transport equation for Bogoliubov quasiparticles. Coherence factors are treated exactly in the calculation of the collision integral. The numerical result for =_s= _s(T)/_n(T_c) agree very well with experiment in the range 0.8t1.0. Analytic expressions = 0.577 (1–1.0008t) and =1–(23/64) [=(T)/k _B T] are obtained in the low-temperature region and in the vicinity ofT _c, respectively. From the numerical analysis it is shown that the latter equation is valid only in the temperature range 0.9997t1.0.Supported by the Research Institute for Fundamental Physics, Kyoto University.     

High-temperature and broadband immersion ultrasonic probes

Immersion ultrasonic probes for measurements and imaging at high temperature are presented. The probes consist of sol-gel-sprayed thick films as piezoelectric ultrasonic transducers (UTs) directly deposited onto steel buffer rods. They operate in pulse-echo mode at temperatures up to 500/spl deg/C. The operating ultrasonic frequency is between 5 MHz and 20 MHz, controlled by the film thickness. The ultrasonic thickness measurement of a steel plate with the probe fully immersed in molten zinc at 450/spl deg/C was demonstrated using ultrasonic plane waves. For imaging purposes, the probing end of the steel buffer rod was machined into a semispherical concave shape to form an ultrasonic lens and achieve high spatial resolution with focused ultrasound in liquids. Ultrasonic surface and subsurface imaging using a mechanical raster scan of the focused probe in silicone oil at 200/spl deg/C was also carried out. The importance of the signal-to-noise ratio (SNR) in the pulse-echo measurement is discussed.     

Small crack behavior and fracture of nickel-based superalloy under ultrasonic fatigue

Fracture and small crack behavior in the very high cycle domain of 10⁹ cycles were investigated with a nickel-based superalloy under ultrasonic fatigue in ambient air at room temperature. The influence of ultrasonic frequency is examined by comparing the results with those in conventional low frequency fatigue. It is found that fatigue strength increases as frequency is raised up to 19.5 kHz and the most of fatigue life is consumed in nucleating and propagating small cracks up to 100 μm. Transition of fracture mode from transgranular ductile fracture to cleavage-dominated fracture occurs beyond a critical stress intensity factor range of approximately , leading to the catastrophic failure under ultrasonic fatigue.     

金属三维微结构加工技术的研究

三维微结构制作技术是MEMS加工的关键技术之一.现有的三维微细加工技术主要有利用SU-8等光刻胶形成的以IC工艺为基础的硅三维微结构制作技术和以同步辐射X射线曝光为基础的LIGA技术.但是,在传统的去胶液中,SU-8光刻胶会膨胀变形,从而可能导致图形的失败.而LIGA技术需要昂贵的同步辐射光源和特制的LIGA掩模板,加工周期长.为此,基于反应离子深刻蚀技术,结合电镀工艺,提出了一种金属微结构的微加工制作方法,并进行了相应的实验.结果表明,该方法不仅可以制造出深宽比为6的微型金属螺旋线圈,还可以为其他非硅三维微结构的加工提供一定的技术支持.     

Three-dimensional rainbow schlieren measurements in underexpanded sonic jets from axisymmetric convergent nozzles

The rainbow schlieren deflectometry has been combined with the computed tomography to obtain three-dimensional density fields of shock containing free jets and we call the method the schlieren CT. Experiments on the schlieren CT have been performed at a nozzle pressure ratio of 4.0 by using an axisymmetric convergent nozzle with an inner diameter of 10 mm at the exit where the nozzle was operated at an underexpanded condition. Multidirectional rainbow schlieren pictures of an underexpanded sonic jet can be acquired by rotating the nozzle about its longitudinal axis in equal angular intervals and the three-dimensional density fields are reconstructed by the schlieren CT. The validity of the schlieren CT is verified by a comparison with the density fields reconstructed by the Abel inversion method. As a result, it is found that excellent quantitative agreement is reached between the three-dimensional jet density fields reconstructed from both methods.     

Performance tests of catalysts for the safe conversion of hydrogen inside the nuclear waste containers in Fukushima Daiichi

The safe decommissioning as well as decontamination of the radioactive waste resulting from the nuclear accident in Fukushima Daiichi represents a huge task for the next decade. At present, research and development on long-term safe storage containers has become an urgent task with international cooperation in Japan. One challenge is the generation of hydrogen and oxygen in significant amounts by means of radiolysis inside the containers, as the nuclear waste contains a large portion of sea water. The generation of radiolysis gases may lead to a significant pressure build-up inside the containers and to the formation of flammable gases with the risk of ignition and the loss of integrity.In the framework of the project “R&D on technology for reducing concentration of flammable gases generated in long-term waste storage containers” funded by the Japanese Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT), the potential application of catalytic recombiner devices inside the storage containers is investigated. In this context, a suitable catalyst based on the so-called intelligent automotive catalyst for use in a recombiner is under consideration. The catalyst is originally developed and mass-produced for automotive exhaust gas purification, and is characterized by having a self-healing function of precious metals (Pd, Pt and Rh) dissolved as a solid solution in the perovskite type oxides. The basic features of this catalyst have been tested in an experimental program. The test series in the REKO-4 facility has revealed the basic characteristics of the catalyst required for designing the recombiner system.