Use of Spreadsheets as an Introductory Tool for Solving Fluid-Structure Interaction Problem

A simple and intuitive manner for solving fluid-structure interaction problem has been developed using Microsoft Excel spreadsheets. By eliminating the need of previous knowledge of any programming language, the method appears as an interesting introduction to numerical solutions of partial differential equations, due to the direct and didactic way that it is developed. Proposed procedure enables the analysis of tridimensional geometries using the finite difference method and can be extended to other differential equations or boundary conditions. The author＇s objective in this paper is to develop a simple and reliable preliminary method for solving acoustic fluid-structure interaction problems with application to dam-reservoir interaction phenomena and also contribute in the educational growth for undergraduate students that are beginning research in such matter.     

Large area double p–i–n heterostructure for signal multiplexing and demultiplexing in the visible range

Results on the use of a double a-SiC:H p–i–n heterostructure for signal multiplexing and demultiplexing applications in the visible range, are presented.Modulated monochromatic beams together (multiplexing mode), or a single polychromatic beam (demultiplexing mode) impinge in the device and are absorbed, accordingly to their wavelength, giving rise to a time and wavelength dependent electrical field modulation.Red, green and blue pulsed input channels are transmitted together, each one with a specific transmission rate. The combined optical signal is analyzed by reading out, under different applied voltages, the generated photocurrent. Results show that in the multiplexing mode the output signal is balanced by the wavelength and transmission rate of each input channel, keeping the memory of the incoming optical carriers. In the demultiplexing mode the photocurrent is controlled by the applied voltage allowing regaining the transmitted information. An electrical model gives insight into the device operation.     

Improving a Cluster Based Directional Channel Model in Realistic Macro-Cell Environment

In this paper a realistic directional channel model that is an extension of the COST 273 channel model is presented. The model uses a cluster of scatterers and visibility region generation based strategy with increased realism, due to the introduction of terrain and clutter information. New approaches for path-loss prediction and line of sight modeling are considered, affecting the cluster path gain model implementation. The new model was implemented using terrain, clutter, street and user mobility information for the city of Lisbon, Portugal. Some of the model’s outputs are presented, mainly path loss and small/large-scale fading statistics.     

A hybrid model for a multiproduct pipeline planning and scheduling problem

Brazilian petrobras is one of the world largest oil companies. Recurrently, it faces a very difficult planning and scheduling problem: how to operate a large pipeline network in order to adequately transport oil derivatives and biofuels from refineries to local markets. In spite of being more economical and environmentally safer, the use of a complex pipeline network poses serious operational difficulties related to resource allocation and temporal constraints. The current approaches known from the literature only consider a few types of constraints and restricted topologies, hence they are far from being applicable to real instances from petrobras. We propose a hybrid framework based on a two-phase problem decomposition strategy. A novel Constraint Programming (CP) model plays a key role in modelling operational constraints that are usually overlooked in literature, but that are essential in order to guarantee viable solutions. The full strategy was implemented and produced very adequate results when tested over large real instances.     

Influence of processing on the levels of amines and proline and on the physico-chemical characteristics of concentrated orange juice

The influence of processing on the levels of bioactive amines and proline as well as on some physico-chemical characteristics of concentrated orange juice was investigated. Samples were collected at seven points of a production line on three non-consecutive days, and analysed for the levels of 12 bioactive amines, proline, and reducing and non-reducing sugars, and for some physico-chemical characteristics. Among the amines analysed, only putrescine, spermidine and synephrine were found in the samples at all processing stages. Significant differences were observed for spermidine and total amine levels throughout processing. Synephrine and putrescine were resistant to processing. Proline levels changed significantly throughout processing, as did levels of reducing and non-reducing sugars. The pH varied from 3.59 to 3.72, acidity from 0.873 to 0.918 g citric acid/100 mL, and density from 1.0378 to 1.0970 g/mL. Among these parameters, pH, acidity and density were significantly affected by processing.     

Optimization of performances of gelatin/LiBF4-based polymer electrolytes by plasticizing effects

Gelatin is a cheap and abundant natural product with very good biodegradation properties and can be used to obtain acetic acid or LiClO₄-based gel polymer electrolytes (GPEs) with high ionic conductivity and good stability. This article presents results of GPEs obtained by the plasticization of gelatin and addition of LiBF₄, where the optimization of the system was achieved by using a factorial design type 2² with two variables: glycerol and LiBF₄. From this analysis it was stated that the effect of glycerol as a plasticizer on the ionic conductivity results is much more important than the effect obtained by varying the lithium salt content or the effect of the interaction of both variables. Also all the samples were characterized by X-ray diffraction measurements, UV-vis-NIR spectroscopy and scanning electron microscopy (SEM) and impedance spectroscopy. The ionic conductivity results of all analyzed samples as a function of temperature obey predominantly an Arrhenius relationship and the samples are stable up to 160 °C. Good conductivity results combined with transparency and good adhesion to the electrodes have shown that gelatin-based GPEs are very promising materials to be used as solid electrolytes in electrochromic devices.     

Antioxidant and antihypertensive hydrolysates obtained from by-products of cannery sardine and brewing industries

Hydrolysates with antioxidant and antihypertensive activities were obtained from sarcoplasmic proteins of canned sardine by-product and proteases extracted from Brewer’s spent yeast. Using response surface methodology, hydrolysis time and temperature were selected to achieve the maximum bioactivity. Hydrolysates produced using the substrate/enzyme ratio 1:0.27 (mg/U), 7 h and 50ºC, presenting an angiotensin I-converting enzyme-inhibitory activity of 164 µg protein/mL and an antioxidant activity of 293 μM TE/mL. Experimental results agreed with predicted values within a 95% confidence interval. Within this work the simultaneous valorisation of two agro-industrial by-products was successfully achieved.     

Alicyclobacillus acidoterrestris spores as a target for Cupuaçu (Theobroma grandiflorum) nectar thermal processing: kinetic parameters and experimental methods

The kinetic parameters of thermal inactivation of a spore former, Alicyclobacillus acidoterrestris, in a tropical fruit nectar [25% of Cupua?u (Theobroma grandiflorum) pulp and 15% sugar] were determined by the isothermal method (IM), under batch heating, and by the paired equivalent isothermal exposures (PEIE) method, under non-isothermal continuous conditions. The isothermal experiments were repeated three times, every 4 months, with the same spore suspension kept frozen between experiments. The aging of spores, under frozen storage, seemed to produce a notorious increase in the z-value from experiment to experiment: Experiment 1 (z = 7.8 +/- 2.6 degrees C, D(95 degrees C) = 5.29 +/- 0.96 min), Experiment 2 (z = 22 +/- 5 degrees C, D(95 degrees C) = 5.99 +/- 0.63 min), and Experiment 3 (z =29 +/- 10 degrees C, D(95 degrees C) = 3.82 +/- 0.48 min). The evaluation of the kinetic parameters by the PEIE method was carried out in parallel with Experiment 3, with the same aged spores, and the results (z = 31 +/- 6 degrees C, D(95 degrees C) = 5.5 +/- 1.2 min) were close to the ones obtained in this experiment. From this work, it seems that the PEIE method can also be applied to evaluate the reduction parameters of a spore-forming microorganism, and in a more realistic way, since the continuous system eliminates the errors caused by come-up and cool-down times (CUT and CDT) that are unavoidable in isothermal experiments. Therefore, when designing a thermal process for a continuous system, the PEIE method should be used, or the chances are that the process would be underdesigned, risking that the desired level of spore inactivation would not be achieved. An optimization of the thermal processing conditions was next performed for Cupua?u nectar, considering a 5D reduction in A. acidoterrestris spores. If a pasteurization process is considered, the conditions that ensure safety (9 min at 98 degrees C) only allow a 55% retention of ascorbic acid (AA). If sterilization is considered, 8 s at 115 degrees C will ensure a safe product and retain 98.5% of the original ascorbic acid. Therefore, if A. acidoterrestris is considered as the target microorganism, the nectar should undergo an aseptic high temperature short time principle (HTST) process to achieve a 5D reduction in this acidophilus spore former. However, if the hot-fill-and-hold pasteurization process is preferred, the product should be fortified with ascorbic acid.     

Relapsed chronic myeloid leukemia in accelerated phase 10 years after allogeneic bone marrow transplantation: full chimera reconversion with donor peripheral blood stem cells infusion

The authors calculated the shunt revision rate for 77 consecutive patients with tumoural obstructive hydrocephalus. At a mean follow up of 23.7 months, the annual revision rate was 0.06 which is significantly lower than the annual revision rate of 0.39 for other hydrocephalic patients treated during the same period. Shunted patients who had total excision of their lesions had a significantly lower revision rate than patients who had a partial excision or a biopsy. It is therefore, suggested that cases with tumoural obstructive hydrocephalus may represent a subset of hydrocephalic patients who are associated with a relatively low risk of shunt complications. The observation has to be addressed when the role of endoscopic third ventriculostomy in these patients is being considered.