累托石粘土在电瓷工业中的应用研究

根据累托石粘土具有可塑性、泥浆性能好、高温不开裂等特点,对湖北钟祥县所产的累托石粘土矿进行了研究。经选矿后除去硫铁矿的精矿含累托石在60～70％,TFe_2O_3低于1.5％,即可用做优质电瓷结合粘土。配方试验证明:累托石粘土具有结合性好、干燥烧成收缩小,其铝质高强度电瓷坯料烧成抗弯曲强度大于147 MPa,坯料塑性指标大于49 N·cm(5 kgf/cm~2),此指标完全可满足电瓷要求。研究结果表明累托石粘土是一种新型的优质电瓷结合粘土。     

非线性理论在计算机视觉中的应用

针对目前计算机视领域中普遍存在的大量非线性问题以及此带来的鲁棒必差、效率低等问题，结合目前比较新的解决非线性问题的方法，诸如同伦法、吴方法以及Ａｄｏｍａｉｎ方法等，对一系列计算机视觉中的非线性问题给出了比较满意的解答。     

Age alters regional distribution of blood flow during moderate-intensity exercise

During dynamic exercise in warm environments, requisite increases in skin and active muscle blood flows are supported by increasing cardiac output (Qc) and redistributing flow away from splanchnic and renal circulations. To examine the effect of age on these responses, six young (Y; 26 +/- 2 yr) and six older (O; 64 +/- 2 yr) men performed upright cycle exercise at 35 and 60% of peak O2 consumption (VO2peak) in 22 and 36 degrees C environments. To further isolate age, the two age groups were closely matched for VO2peak, weight, surface area, and body composition. Measurements included heart rate, Qc (CO2 rebreathing), skin blood flow (from increases in forearm blood flow (venous occlusion plethysmography), splanchnic blood flow (indocyanine green dilution), renal blood flow (p-amino-hippurate clearance), and plasma norepinephrine concentration. There were no significant age differences in Qc; however, in both environments the O group maintained Qc at a higher stroke volume and lower heart rate. At 60% VO2peak, forearm blood flow was significantly lower in the O subjects in each environment. Splanchnic blood flow fell (by 12-14% in both groups) at the lower intensity, then decreased to a greater extent at 60% VO2peak in Y than in O subjects (e.g., -45 +/- 2 vs. -33 +/- 3% for the hot environment, P < 0.01). Renal blood flow was lower at rest in the O group, remained relatively constant at 35% VO2peak, then decreased by 20-25% in both groups at 60% VO2peak. At 60% VO2peak, 27 and 37% more total blood flow was redistributed away from these two circulations in the Y than in the O group at 22 and 36 degrees, respectively. It was concluded that the greater increase in skin blood flow in Y subjects is partially supported by a greater redistribution of blood flow away from splanchnic and renal vascular beds.     

Ovarian mucinous cystadenocarcinoma with mural nodules of anaplastic carcinoma: report of a case and review of the literature

A decline of cytosol protein kinase C activity was observed in rat myocardial cells at 4 and 8 h after endotoxin administration, and membrane-associated protein kinase C activity rose at the same time. The activity of membrane protein kinase C in aortic smooth muscle cells at 0.5 and 4 h after endotoxin injection was higher than that in control, while cytosol protein kinase C activity was lower. The results indicate that protein kinase C was activated in myocardial cells and aortic smooth muscle cells during various phases of endotoxemia.     

开放、交流与凝聚--广州大学城广外学生活动中心设计

2003年夏天，广州大学城广州外语外贸大学一期项目的单体设计在相当短的设计周期中紧张地铺开。     

梯形断面水力计算的一种新方法

本文从梯形水力最优断面的基本思路出发，通过理论分析找到了梯形断面水力计算的一种新方法——即通过特征参数进行梯形断面的水力计算。     

A novel dynamic survivable routing in WDM optical networks with/without sparse wavelength conversion

In this paper, we study the dynamic survivable routing problem, both in optical networks without wavelength conversion and in optical networks with sparse wavelength conversion, and propose a novel hybrid algorithm for it based on the combination of mobile agents technique and genetic algorithms (GA). By keeping a suitable number of mobile agents in the network to cooperatively explore the network states and continuously report cycles (that are formed by two disjoint-link routes) into the routing tables, our new hybrid algorithm can promptly determine the first population of cycles for a new request based on the routing table of its source node, without the time consuming process associated with current GA-based lightpath protection schemes. We further improve the performance of our algorithm by introducing a more advanced fitness function that is suitable for both the above networks. Extensive simulation studies on the ns-2 network simulator show that our hybrid algorithm achieves a significantly lower blocking probability than the conventional survivable routing algorithms for all the cases we studied.     

Flows in rectangular microchannels driven by capillary force and gravity

Capillary phenomena was studied and discussed by the scholars about 200 years ago, but the progress was slow due to the limited equipment and manufacture precision of the microchannel. In recent years, because of the rapid development of MEMS and micromachining, many applications of the capillary flow is widely developing in some modern processes, such as underfilling of flip chip, flow in microfluidic chip or biochip, and a variety of other fields.     

官能团化MCM-41在分离低碳醇-水混合物中的应用

采用一步法水热合成了介孔材料氯丙基官能团化的MCM-41(Cl(CH2)3-MCM-41)、氨丙基官能团化MCM-41(NH2(CH2)3-MCM-41)、甲基官能团化MCM-41(CH3-MCM-41)和氯丙基官能团化硅胶,并考察了它们作为气相色谱固定相分离低碳醇-水混合物的情况。实验结果表明,Cl(CH2)3-MCM-41能够分离低碳醇-水混合物中的各组分,随水、甲醇、乙醇、异丙醇、正丁醇极性的减小,各分子与Cl(CH2)3-MCM-41的作用力增强,保留时间延长。氯丙基官能团化硅胶、NH2(CH2)3-MCM-41)和CH3-MCM-41均不能分离低碳醇-水混合物,表明介孔材料规则的孔道结构、表面嫁接基团等对低碳醇-水混合物的分离有重要影响。同时考察了Cl(CH2)3-MCM-41的氯丙基负载量对低碳醇-水混合物分离效果的影响,结果表明,当氯丙基的摩尔分数为15%时,分离效果最佳。     

Effect of Cu concentration on the reactions between Sn-Ag-Cu solders and Ni

The reaction between the Sn-Ag-Cu solders and Ni at 250°C for 10 min and 25 h was studied. Nine different Sn-Ag-Cu solders, with the Ag concentration fixed at 3.9 wt.% and Cu concentrations varied between 0.0–3.0 wt.%, were used. When the reaction time was 10 min, the reactions strongly depended on the Cu concentration. At low-Cu concentrations (≦0.2 wt.%), only a continuous (Ni_1−xCu_x)₃Sn₄ layer formed at the interface. When the Cu concentration increased to 0.4 wt.%, a continuous (Ni_1−xCu_x)₃Sn₄ layer and a small amount of discontinuous (Cu_1−yNi_y)₆Sn₅ particles formed at the interface. When the Cu concentration increased to 0.5 wt.%, the amount of (Cu_1−yNi_y)₆Sn₅ increased and (Cu_1−yNi₆)₆Sn₅ became a continuous layer. Beneath this (Cu_1−yNi_y)₆Sn₅ layer was a very thin but continuous layer of (Ni_1−xCu_x)₃Sn₄. At higher Cu concentrations (0.6–3.0 wt.%), (Ni_1−xCu_x)₃Sn₄ disappeared, and only (Cu_1−yNi_y)₆Sn₅ was present. The reactions at 25 h also depended strongly on the Cu concentration, proving that the strong concentration dependence was not a transient phenomenon limited to a short reaction time. The findings of this study were rationalized using the Cu-Ni-Sn isotherm. This study shows that precise control over the Cu concentration in solders is needed to produce consistent results.