Optimal base-station locations in two-tiered wireless sensor networks

We consider generic two-tiered wireless sensor networks (WSNs) consisting of sensor clusters deployed around strategic locations, and base-stations (BSs) whose locations are relatively flexible. Within a sensor cluster, there are many small sensor nodes (SNs) that capture, encode, and transmit relevant information from a designated area, and there is at least one application node (AN) that receives raw data from these SNs, creates a comprehensive local-view, and forwards the composite bit-stream toward a BS. This paper focuses on the topology control process for ANs and BSs, which constitute the upper tier of two-tiered WSNs. Since heterogeneous ANs are battery-powered and energy-constrained, their node lifetime directly affects the network lifetime of WSNs. By proposing algorithmic approaches to locate BSs optimally, we can maximize the topological network lifetime of WSNs deterministically, even when the initial energy provisioning for ANs is no longer always proportional to their average bit-stream rate. The obtained optimal BS locations are under different lifetime definitions according to the mission criticality of WSNs. By studying intrinsic properties of WSNs, we establish the upper and lower bounds of maximal topological lifetime, which enable a quick assessment of energy provisioning feasibility and topology control necessity. Numerical results are given to demonstrate the efficacy and optimality of the proposed topology control approaches designed for maximizing network lifetime of WSNs.     

参数强迫激励下非线性振子尖点型奇点的分叉

本文首先研究了不具有Z_2—对称性时的规范形理论和退化向量场的普适开折理论。然后利用这些理论研究了参数激励与强迫激励联合作用下非线性振动系统的尖点型奇点的余维2退化分叉。     

略论贵州省化工企业职业教育的发展

从目前市场需求和就业率出发，进行形势分析，提出优化专业设置、加强实践环节、提高高职学院办学层次、推进“双证书”制度等改革方法，以促进化工职业教育的发展。     

油基钻井液的推广及循环利用

针对普通水基钻井液在钻进中强、强水敏性油藏时会造成储层污染、产量降低的问题,指出了油基钻井液在钻进该类油藏时的优势和其成本高、对生态环境有污染的缺点。为了大面积推广应用油基钻井液,重点介绍了油基钻井液的特性和稳定性影响因素,并通过室内评价证明了油基钻井液在油层保护中的良好效果,着重阐述了油基钻井液在王庄油田的现场应用情况,并探讨了油基钻井液的循环利用技术。研究结果表明,油基钻井液不仅具有良好的油层保护效果,而且具有较好的社会经济效益。     

新钢炼铁系统技术进步

通过加强精料、实施技术改造、优化高炉操作等措施，新钢炼铁生产取得了明显的进步，技术经济指标明显改善。     

UCT测井技术在河南油田的应用

介绍了超声波固井质量检测仪(UCT)的原理、结构及测井方法，分析了UCT测井资料的应用情况。实践表明，UCT能准确地探测套管腐蚀，直观评价水泥与套管、水泥与地层一、二界面的胶结质量。     

Syngas production via combined oxy-CO2 reforming of methane over Gd2O3-modified Ni/SiO2 catalysts in a fluidized-bed reactor

In this research, Ni/SiO₂ catalyst was modified with different amount of Gd₂O₃ and characterized with temperature-programmed desorption of CO₂ (CO₂-TPD) and NH₃ (NH₃-TPD), temperature-programmed reduction with H₂ (H₂-TPR) and X-ray diffraction (XRD). It was found that Gd₂O₃-modified Ni/SiO₂ catalysts possessed higher CO₂ adsorption and activation ability due to the formation of surface carbonate species. H₂-TPR and XRD characterizations found that the strong interaction among nickel, Gd₂O₃ and SiO₂ took place, which improved the dispersion of Ni. Gd₂O₃-modified Ni/SiO₂ catalysts exhibited higher activity and stability for the combined oxy-CO₂ reforming of methane in fluidized-bed reactor. The H₂/CO ratio in produced syngas could be controlled via controlling reaction temperature and CO₂/O₂ ratio in feed.     

Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

深圳市某商住楼通风空调设计

本文简要介绍深圳某商住楼通风空调系统、水系统的设计及空调方式的选取、简述了各项设计的技术数据,可供同行参考。     

Self-assembly of highly oriented palladium-based nanowires on mica surface

The self-assembly of various nanostructures is recently attracting a great deal of research attention. In this paper, we demonstrate that a palladium chloride aqueous solution, mixed with a proper ammonia solution, can produce Tetra-amminepalladous chloride (Pd(NH₃)₄Cl₂·H₂O) nanowires. These nanowires can spontaneously form the two-dimensional hexagon-oriented Pd(NH₃)₄Cl₂·H₂O arrays on mica surfaces. We can control the length and height of these nanowires by adjusting their deposit time on the mica substrate. This method can be potentially used in making sensors or in making templates to wire and position nanodevices.