Enhancement of C2C12 differentiation by perfluorocarbon-mediated oxygen delivery

We have studied the effect of enhanced oxygen delivery by perfluorocarbons on the differentiation of C2C12 cells. The extent of differentiation was assessed by means of phase contrast/fluorescence microscopy, active tension measurement and the glucose consumption/lactate production rates. We found that enhanced oxygen delivery is suitable for full differentiation of C2C12 cells.     

An integrated numerical simulator for thermal performance assessments of firefighters’ protective clothing

Research and development of firefighters’ protective clothing relies on a large number of fire disaster experiments in order to assess the thermal performance. It would be substantially advantageous to substitute a virtual numerical experiment for a real one in terms of time, cost and safety. The present article reports the development of an integrated numerical simulator that makes possible the estimation of burn injuries originating from fire disasters. In the simulator, a general-purpose computational fluid dynamics program computes the fluid flow and heat transfer in an in situ fire event, while a one-dimensional program calculates the radiative–conductive heat transfer through the clothing and human skin. A data interface combines the two simulations by loose coupling so as to give the real-time burn injury progress output. The predicted surface heat fluxes and burn degrees agree with experimental measurements reasonably well. Possible numerical error sources are discussed that call for potential improvements in the future.     

Stone-Wales Rearrangement Pathways from the Hinge-Opened [2+2] C60 Dimer to Ipr C120 Fullerenes. Vibrational Analysis of Intermediates

Abstract

Possibility of the previously proposed hinge-opened product 2 of [2+2] C₆₀, dimer 1 transforming itself into IPR C₁₂₀ fullerenes by a series of generalized Stone-Wales (GSW) rearrangements has been tested by seeking all topologically acceptable pathways with the help of a graphical search program. the first IPR isomer 4 appeared after 20 GSW steps from the wide-bridged dumb-bell shaped precursor 3. More than 1,000 C₁₂₀ fullerene structures were generated during subsequent ten GSW steps, but the outstanding T _d C₁₂₀ global minimum 5 was not reached. Semiempirical vibrational calculations predict characteristic transition in the vibrational spectra in the course of rearrangement pathway.     

Symmetric lithium-ion cell based on lithium vanadium fluorophosphate with ionic liquid electrolyte

Lithium vanadium fluorophosphate, LiVPO₄F, was utilized as both cathode and anode for fabrication of a symmetric lithium-ion LiVPO₄F//LiVPO₄F cell. The electrochemical evolution of the LiVPO₄F//LiVPO₄F cell with the commonly used organic electrolyte LiPF₆/EC-DMC has shown that this cell works as a secondary battery, but exhibits poor durability at room temperature and absolutely does not work at increased operating temperatures. To improve the performance and safety of this symmetric battery, we substituted a non-flammable ionic liquid (IL) LiBF₄/EMIBF₄ electrolyte for the organic electrolyte. The symmetric battery using the IL electrolyte was examined galvanostatically at different rates and operating temperatures within the voltage range of 0.01–2.8 V. It was demonstrated that the IL-based symmetric cell worked as a secondary battery with a Coulombic efficiency of 77% at 0.1 mA cm⁻² and 25 °C. It was also found that the use of the IL electrolyte instead of the organic one resulted in the general reduction of the first discharge capacity by about 20–25% but provided much more stable behavior and a longer cycle life. Moreover, an increase of the discharge capacity of the IL-based symmetric battery up to 120 mA h g⁻¹ was observed when the operating temperature was increased up to 80 °C at 0.1 mA cm⁻². The obtained electrochemical behavior of both symmetric batteries was confirmed by complex-impedance measurements at different temperatures and cycling states. The thermal stability of LiVPO₄F with both the IL and organic electrolytes was also examined.     

Three-scale analysis of BaTiO<Subscript>3</Subscript> piezoelectric thin films fabrication process and its experimental validation

A three-scale analysis of crystal growth process is newly proposed based on the first-principles calculation and on the finite element analysis in order to generate a new biocompatible piezoelectric thin film. Crystal growth process of lead-free BaTiO₃ thin films was designed and experimentally generated on SrTiO₃(100), (110), (111), and MgO(100) substrates using the radio-frequency magnetron sputtering method. Crystal structures of BaTiO₃ were measured by X-ray diffraction (XRD) θ/2θ scan. We used Pt for the electrode and measured piezoelectric strain constants d ₃₃ using the ferroelectric measurement system. As a result, analytical crystal orientation fractions on SrTiO₃(110) and (111) substrates had good quantitative agreement with experimental ones, and ones on SrTiO₃(100) and MgO(100) substrates corresponded with these experimental crystal structures. Furthermore, analytically determined piezoelectric strain constants d ₃₃ qualitatively showed a good agreement with experimental ones. Especially, for SrTiO₃(100) and MgO(100) substrates, the differences of d ₃₃ depending on orientation fractions were analyzed by the three-scale simulation accurately. Consequently, it is confirmed that the three-scale analysis is a useful simulation tool to design new biocompatible piezoelectric thin films.     

Improvement in D-E Hysteresis Curve Squareness of PZT Thin Films—Effect of Oxygen Partial Pressure in High-Pressure Post-Annealing

A high-pressure annealing was applied to a post-annealing process for sol-gel derived PZT thin films. The squareness of D-E hysteresis curves changes depending on both total pressure and oxygen concentration. Moreover, the change follows the product of the total pressure and the oxygen concentration, which correspond to oxygen partial pressure P_O2. Where the P_O2 is higher than 0.03 MPa, few of the squareness of the hysteresis curve are excellent. The squareness of the hysteresis curves dramatically improve as the P_O2 decreases. Where the P_O2 is lower than 0.01 MPa, the squareness deteriorates slightly. These changes in the D-E hysteresis curves are thought to be explained by the generation of lead and oxygen vacancies as a function of the P_O2.     

Editorial

International Journal of Information Security -     

New measurement of particle size distribution by a buoyancy weighing-bar method

The rates which particles from JIS Test Powders 1, Class 2 (silica sand), Class 3 (silica sand), Class 16 (calcium carbonate, heavy), and JIS Test Powder 2, Class GBM-20 (barium titanate glass) settled out of homogenous suspensions were determined using the principles of the buoyancy weighing-bar method as well as a sedimentation balance. Samples were standardized by Japanese Industrial Standard, and the dispersing agent was NaPP or NaHMP, while the viscosity improver was a starch syrup solution. Although constructing a handmade sedimentation balance is difficult, developing a handmade weighing tool capable of measuring particle size distribution is easy. Herein three weighing-bars, which were composed of aluminum, stainless steel, and copper, were used to measure the particle size distribution. However, an aluminum slit-cylinder occasionally replaced the weighing-bars. The weighing data obtained via an analytical balance were controlled by connecting the balance to a personal computer with an RS-232C interface, and the determined particle size agreed well with the data obtained by Andreasen analyses and the sedimentation balance.     

Nano-structural Modification of Amorphous Carbon Thin Films by Low-energy Electron Beam Irradiation

CARBON-BASED MATERIALS have been regardedas one of the most important materials in nano-technology.Not only nanotubes and fullerenes but alsoa new form of carbon incorporating distinct graphiticconfigurations in amorphous carbon networks hasrecently attracted extensive interests in order toaccomplish high performances by combining diversephysical properties which arise from carbon structuresfl,2].In particular,the establishment of functionallyhybridized carbon systems with a thin film f…