Dual effect synergistically triggered Ce:(Y,Tb)3(Al,Mn)5O12 transparent ceramics enabling a high color-rendering index and excellent thermal stability for white LEDs

Ce:Y₃Al₅O₁₂ transparent ceramics (TCs) with appropriate emission light proportion and high thermal stability are significant to construct white light emitting diode devices with excellent chromaticity parameters. In this work, strategies of controlling crystal-field splitting around Ce³⁺ ion and doping orange-red emitting ion, were adopted to fabricate Ce:(Y,Tb)₃(Al,Mn)₅O₁₂ TCs via vacuum sintering technique. Notably, 85.4 % of the room-temperature luminescence intensity of the TC was retained at 150 °C, and the color rendering index was as high as 79.8. Furthermore, a 12 nm red shift and a 16.2 % increase of full width at half maximum were achieved owing to the synergistic effects of Tb³⁺ and Mn²⁺ ions. By combining TCs with a 460 nm blue chip, a warm white light with a low correlated color temperature of 4155 K was acquired. Meanwhile, the action mechanism of Tb³⁺ ion and the energy transfer between Ce³⁺ and Mn²⁺ ions were verified in prepared TCs.     

Performance analysis of bit error rate of data link system under pulse LFM interference in time-varying rayleigh channel

Wireless Networks - In such mobile platforms as ships and aircraft, the detection and reconnaissance devices are near to the communication facilities. When working at the same time, they will...     

Enhanced strains of Nb-doped BNKT-4ST piezoelectric ceramics via phase boundary and domain design

A strategy that constructs the morphotropic phase boundary and manipulates the domain structure has been used to design the component of 0.96[Bi_0.5(Na_0.84K_0.16)_0.5Ti_(1-x)Nb_xO₃]-0.04SrTiO₃ (BNKT-4ST-100xNb) to enhance the strain properties for actuator application. Non-equivalent Nb⁵⁺ donor doping modulates the phase transition from the mixture of rhombohedral and tetragonal phases to the pseudocubic phase and results in the coexistence of multiple phases. Moreover, the high-resolution TEM confirms the existence of polar nano regions that contribute to the macroscopic relaxor behaviour. The size of the domains is reduced with increasing Nb⁵⁺, resulting in an enhanced relaxor behaviour. The ferroelectric-relaxor transition temperature decreases from 85 to below 30 °C, implying a non-ergodic to ergodic relaxor transition. An improved strain of 0.56% and a giant normalized strain of 1120 pm/V were achieved for BNKT-4ST-1.5Nb, which were attributed to the unique domain structure in which nanodomains are embedded in an undistorted cubic matrix. Ferroelectric, antiferroelectric, and relaxor phases coexist. As the electric field is large enough, a reversible phase transition occurs. Furthermore, good temperature stability was obtained due to the stability of the nanodomains, and no degradation in strains was observed even after 10⁴ cycles, which may originate from the reversible phase transition and dynamic domain wall. The results show that this design strategy offers a reference way to improve the strain behaviour and that BNKT-4ST-100xNb ceramics could be a potential material for high-displacement actuator applications.     

M2M energy saving strategy in 5G millimeter wave system

Telecommunication Systems - Machine to Machine technology has a broad application prospect in the 5G network, but there is a bottleneck in the energy consumption of intelligent devices powered by...     

坛紫菜蛋白质提取工艺优化及其特性分析

为了开展坛紫菜高值化加工利用，以坛紫菜为原料、蛋白质提取率为评价指标，通过考察提取溶剂、超声时间和功率、料液比、pH等单因素实验、正交试验设计优化超声波提取工艺，对其等电点、乳化性、起泡性等基础特性进行分析，并进行抗氧化活性测定。结果表明，在超声全程时间50 min、超声功率1350 W条件下，坛紫菜蛋白质提取率为60.98%±1.01%。同时通过对所提取的坛紫菜蛋白质特性分析结果显示，坛紫菜蛋白质的等电点为4.5，在等电点附近，坛紫菜蛋白质有较好的泡沫稳定性，可达80.84%±2.95%；抗氧化测定结果显示，坛紫菜蛋白质在5~50 mg/mL范围内具有较强的抗氧化活性，浓度为50 mg/mL时，总抗氧化能力为2.89±0.09 U/mL，ABTS+自由基清除能力相当于0.83±0.08 mmol/L Trolox，DPPH清除率在10 mg/mL时达到68.04%±0.73%。该研究可以为坛紫菜资源的开发利用提供一定的理论依据和技术支持。     

柿竹园多金属矿选矿废水处理试验研究

针对柿竹园多金属矿选矿废水量大、难沉降、pH值高、COD高等特点,研究了石灰沉降+ZJYH03氧化法、石灰沉降+漂白粉氧化法、石灰沉降+NaClO氧化法、聚合硫酸铁沉降+ZJYH03氧化法和石灰沉降+生物氧化法等废水处理工艺,并对比分析了各工艺的处理效果和药剂成本,结果表明: 聚合硫酸铁沉降+ZJYH03氧化法取得了较好的处理效果,该方法具有工艺简单、水质无色透明、药剂成本低等特点。     

白炭黑或埃洛石填充不同橡胶树品系天然橡胶复合材料的性能研究

分别采用白炭黑或埃洛石填充4种橡胶树品系（72059，PR107,73397和RRIM600）天然橡胶（NR）以制备复合材料，并研究复合材料的各项性能。结果表明：白炭黑或埃洛石填充NR复合材料的硫化特性受橡胶树品系的影响较小；两种填料填充的RRIM600复合材料均表现出最大的溶胀平衡交联密度和最优的物理性能，且50～70 ℃范围内的损耗因子最小，表明RRIM600复合材料的滞后损失最小，RRIM600满足低滚动阻力轮胎的用胶要求，而72059复合材料的相应性能较差；白炭黑填充72059复合材料的热稳定性最优，埃洛石填充各橡胶树品系NR复合材料的热稳定性差异不明显；PR107复合材料和73397复合材料的综合性能居中。     

超亲水毛细芯环路热管启动及热性能分析

为解决电子设备高热通量下的散热问题，采用H₂O₂氧化法对烧结毛细芯进行了超亲水改性，研究了毛细芯表面润湿性对吸液性能的影响。并将改性后的超亲水毛细芯应用到环路热管内，研究了倾斜角度及加热功率对超亲水毛细芯环路热管的换热特性的影响。实验结果表明：超亲水毛细芯的吸液速度增加，吸液时间较亲水毛细芯减小了3.52ms；与普通亲水毛细芯环路热管相比，在加热功率Q=200W时，超亲水毛细芯环路热管蒸发器中心温度降低了约6.0℃，在Q=20W时启动时间与温度分别降低了33s与2.5℃。同时发现超亲水毛细芯环路热管在正重力状态时的运行温度更低，热阻较小，最低热阻仅为0.084℃/W。