Al2O3陶瓷激光铣削试验研究

采用Nd∶YAG脉冲激光器对Al2 O3陶瓷进行铣削加工试验。系统研究了工艺参数对铣削量和铣削面质量的影响规律 ,并利用优化的铣削工艺对Al2 O3陶瓷进行多种形状的铣削加工。     

Popular biorthogonal wavelet filters via a lifting scheme and its application in image compression

A technique using a lifting scheme is presented for constructing compactly supported wavelets whose coefficients are composed of free variables locating in an interval. An efficient approach-based wavelet for image compression is developed by selecting the coefficients of the 9-7 wavelet filter and associated lifting scheme. Furthermore, the rationalised coefficients wavelet filter that can be implemented with simple integer arithmetic is achieved and its characteristic is close to the well known original irrational coefficients 9-7 wavelet filters developed by A. Cohen et al. (Commun. Pure Appl. Maths., vol.45, no.1, p.485-560, 1992). To reduce the computational cost of image coding applications further, an acceleration technique is proposed for the lifting steps. Software and hardware simulations show that the new method has very low complexity, and simultaneously preserves the high quality of the compressed image.     

一种适合∑-△A／D转换器的FIR数字滤波器

讨论了一种用于∑-△A／D转换器的固定系数半带（half-band）FIR数字滤波器，分析了其线性相位特性和低通滤波特性，给出了频率仿真结果，以及在Cadence设计系统中的电路和版图实现。     

地震多次波压制方法技术应用研究

辽河盆地西部凹陷地质条件复杂，地震波场中多次波较发育，受其影响，主要目的层反射波干涉现象较严重，有效波难以识别，总体信噪比不高，给构造及岩性解释造成困难。对三维地震资料的处理研究表明，采用预测反褶积、F—K域多次波衰减技术及近道内切法等相结合的方法压制多次波是一种有效的途径。从资料处理效果看，剖面质量明显得到改善，证明该组合去噪技术是切实可行的。     

机械-射流破岩耦合特性研究

在现代旋转钻井破碎井底岩石中仍是以机械破岩为主，理论与实践证明，射流辅助破岩是提高钻井破岩效率的重要途径，但它们的耦合特性研究极少。文章基于渗流场与应力场的耦合理论分析，进行了机械与射流破岩耦合特性的实验研究。结果表明：射流压力和水楔作用对岩石渗流场、应力场具有重要作用，耦合作用比非耦合作用的破岩效率有较大幅度的提高。在实验条件下，砂岩的耦合作用提高破岩效率40％左右，灰岩的耦合作用提高破岩效率20％左右。     

县区电网电压无功控制系统设计

针对目前地区电网电压无功控制的现状,提出了电网电压无功监控系统的设计方案。说明优化控制系统应该实现的功能,选用线性规划(LP)算法为核心程序,正常状态下以有功网损最小为目标函数。依据分离原理提出两层分级控制的系统结构,分析优化控制系统的工作流程及特点。     

"十一五"规划国家级重点通信项目

《信息产业科技发展“十一五”规划》提出设立部分重大项目,力争实现重点突破,形成一批具有自主知识产权的核心技术和创新产品,打造较为完整的产业链,形成世界一流的产业群。这其中,与通信相关的重点项目主要有:宽带无线移动通信、下一代网络、家庭网络、智能终端、数字电视等。本部分将对我国在以上领域的现状、项目的具体内容和目标、实现这些目标的具体计划以及相关厂商在各领域的努力和成绩进行介绍。     

Thermo-Sensitive Ba0.64Sr0.36TiO3 Thin Film Capacitors for Dielectric Type Uncooled Infrared Sensors

Ba_0.64Sr_0.36TiO₃ (BST) thin films are prepared on Pt/Ti/SiO₂/Si₃N₄/SiO₂/Si substrates by a sol-gel method. Thermo-sensitive BST thin film capacitors with a Metal-Ferroelectrics-Metal (M-F(BST)-M) structure are fabricated as the active elements of dielectric type uncooled infrared sensors. XRD are employed to analyze the crystallographic structures of the films. AFM observations reveal a smooth and dense surface of the films with an average grain size of about 35 nm. Rapid temperature annealing (RTA) process is a very efficient way to improve crystallization quality. The preferable annealing temperature is 800°C for 1 min. The butterfly shaped C-V curves of the capacitors indicate the films have a ferroelectric nature. The dielectric constant and dielectric loss of the films at 100 kHz are 450 and 0.038, respectively. At 25°C, where the thermo-sensitive capacitors work, the temperature coefficient of dielectric constant (TCD) is about 5.9 %/°C. These results indicate that the capacitors with sol-gel derived BST thin films are promising to develop dielectric type uncooled infrared sensors.     

选择测试阀在现场测试中的应用

选择测试阀是新一代全通径压控式测试器，在结构和性能上有了本质的创新，使现场操作更加简便、安全，对井筒条件要求低，更适用于高温、高压、深井、气井的地层测试，拓宽了地层测试和其它井下作业的兼容性。经7井次应用，其安全性、可靠性越来越得到认可。     

内置旁路型软起动器的替代性

本文根据软起动器的发展趋势，就目前市场上应用的三种类型的软起动器进行分析，说明各自的优缺点，同时给出结论，内置旁路型淘汰其它类型的软起动器的必要性。