Production of compounded asphalts of improved quality

Paving-and roofing-grade asphalts were obtained at LUKOIL-Permnefteorgsintez Ltd. by mixing peroxidized asphalt and a number of high-boiling unoxidized petroleum products in certain ratios. The asphalts obtained have improved performance characteristics: high plasticity and low brittleness temperature. __________ Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 2, pp. 26–28, May–June, 2006.     

双城凹陷断裂特征及其对油气运聚的控制

双城凹陷断裂极为发育,均为正断层,断裂以南北向和北北东向为主,在剖面上断裂的形成明显具有分期性。断裂对油气运聚、成藏的控制作用主要表现在:基底大断裂F1对压力起到了分割面的作用,控制了油气运移的方向,断裂为油气运移提供了通道作用,断裂的封闭性为油气的聚集成藏提供了遮挡条件。通过断裂特征及其对油气运聚的控制作用分析表明,双西陡坡带为油气运移的指向区;结合对该区的沉积、构造等条件的分析认为双西斜坡为油气勘探的有利地区。     

HFC电缆分配系统的建设与思考

结合沧州市网络的实际情况，主要分析HFC电缆分配系统双向传输改造的建设标准和实施方案。     

光纤光栅感温火灾探测报警系统在原油罐区的应用

通过对现有罐区火灾自动报警技术的认真考察、对比,在石西集中处理站原油罐区安装了光纤光栅感温火灾探测报警系统.该报警系统的传感信号是光的波长变化,传感器及其探测系统是靠光缆连接而进入被测现场,它具有高安全性、高可靠性、高绝缘性、高抗电磁干扰性、防潮耐蚀、寿命长等其他传统火灾探测报警系统无法比拟的优越性能.阐述了其系统构成和运行效果.该系统在石西集中处理站运用效果良好.     

高效的模式匹配算法研究

对入侵检测中模式匹配的方法进行了研究,分析了当前常用的模式匹配方法的弱点与不足,提出了一种基于三叉树结构的自动机方法,较好的避免了传统树型结构中由于节点数目变化而导致的不便。此外,利用匹配失败的信息,实现了跳跃匹配,提高了模式匹配的速度。*     

Nanoscale Crystallization in Amorphous Fe–P–Mn Alloys

Mössbauer effect measurements and physicochemical analysis demonstrate that annealing of amorphous Fe–P–Mn alloys leads to the formation of a nanocrystalline structure.     

Some Specific Features of Degradation of Superheater Tubes of the Boilers of Thermal Electric Power Plants Made of 12Kh18N12T Steel

We study the process of degradation and damage for superheater tubes of the pressure boilers of power plants made of austenitic chromium-nickel steel. The role of sensitization and partial sigmatization of austenitic steel in the embrittlement of the tubes is analyzed.__________Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 40, No. 4, pp. 81–86, July–August, 2004.     

A biochar from casein and its properties

A biochar was prepared by pyrolysis of casein. A helium and mercury porosimeter were used to measure the true and apparent densities of the chars respectively, elemental and IR analysis were used to characterize the chemical composition of char. A SEM was used to observe the char surfaces in order to verify the presence of porosity. The biochar has 9.02% of nitrogen, content of porosity is 20%. The experimental results show that it is possible to prepare chars with relatively high porosity from casein for the further preparation of activated carbon.     

φ90mm低铬铸球开裂失效分析

φ90mm低铬铸球在做落球试验中过早出现开裂现象。将该铸球材质进行化学成分分析、力学性能测定及金相组织观察。分析结果表明，该铸球的材料中夹杂物含量较高，其硬度值又偏高，铸球内部又存在严重缩松及其铸态组织中存在大量奥氏体转变产物，致使铸球在落球试验中过早开裂。经过工艺措施的改进，解决了铸球出现过早开裂的现象。     

晶须取向对SiCw/6061Al复合材料热压缩变形行为的影响

采用SEM 和 Magiscan-2A 图像分析系统研究了晶须取向对SiCw/6061Al复合材料在300℃压缩变形行为的影响.结果表明:晶须取向影响着晶须折断程度和转动角度; 随着晶须取向角的增加,晶须转动和折断行为所导致的软化效果下降.同时晶须取向也影响复合材料的热压缩应力-应变曲线的形状.在热压缩变形过程中,晶须取向角为0°和30°的复合材料表现出明显应变软化现象, 晶须取向角为45°的复合材料无明显软化现象.晶须取向角为90℃的复合材料表现出应变硬化现象.