道在山林，周弥六合——浙东天台山“洞天福地”的山岳景观流变及文化意象研究

道教洞天福地作为中国名山风景的经典类型之一，在宗教山岳景观中占据独特地位。浙东天台山水神秀，历代高道以入山隐修为主要目的，形成了道教在区域山林的景观文化基础。从天台山“神仙之乡”的文化背景出发，从“想象与实践”的视角切入，梳理了天台山洞天福地的景观流变：分析其“不死之福庭”地域性景观的形成经历了“赤城→桐柏”的信仰转移过程；以天台山为坐标，洞天福地格局打破了区域“层级”分布特征，而呈现大范围“州郡”空间格局。作为“联结点”的天台山，洞天世界沟通了宇宙、山、人3个基本场域，由此衍生出“洞宫”式和“周回”式山岳空间营建典范。旨在挖掘洞天福地中典型案例的价值，为中国洞天福地体系的构建提供理论依据。     

电压对电刷镀三价铬镀层性能的影响

在45钢表面电刷镀得到三价铬镀层,镀液组成和工艺条件为:Cr2(SO4)36H2O 0.4 mol/L,甲酸铵0.5 mol/L,氨基乙酸0.5 mol/L,H3BO30.6 mol/L,NaH2PO2 H2O 0.3 mol/L,pH=1.5,温度50°C,镀笔移动速率15 cm/s。研究了电压对镀铬层显微结构、表面粗糙度、厚度、显微硬度和耐磨性的影响。随电压增大,镀层厚度增大,显微硬度和耐磨性均先提高后降低。电压为14 V时,镀层的表面平整,粗糙度为2.387μm,显微硬度为602 HV,耐磨性最好。     

脉冲电沉积镍-铜合金

采用脉冲电沉积技术在304不锈钢表面制备Ni-Cu合金镀层,镀液组成和工艺条件为:NiSO4ꞏ6H2O 200g/L,CuSO4ꞏ5H2O 10 g/L,十二烷基硫酸钠0.2 g/L,柠檬酸钠80 g/L,糖精0.2 g/L,pH 4.0,温度25°C,搅拌速率30 r/min,平均电流密度40~120 mA/cm2,脉冲频率0~100 Hz,占空比20%~90%,时间30 min。研究了平均电流密度、脉冲频率和占空比对Ni-Cu合金镀层的元素组成、表面形貌和显微硬度的影响,得到较优的工艺参数为:平均电流密度40 mA/cm2,脉冲频率50 Hz,占空比60%。该条件下所得Ni-Cu合金镀层由质量分数分别为56.53%和43.47%的Ni和Cu组成,呈“菜花”状形貌,结晶细致、均匀,显微硬度为614.4 HV。     

Iterative equalization combining algorithm in intersymbol interference channel

To realize joint optimization of spatial diversity and equalization combining in the intersymbol interference (ISI) channel, an iterative equalization combining algorithm is proposed. The proposed algorithm uses the coefficients of Turbo equalization to calculate the combination weights without estimating the signal to noise ratio in each diversity branch. The equalized symbols from different diversity branches are combined, and the extrinsic information output from the decoder is fed back to the equalizers, so as to exchange soft information between the equalizers and the decoder. The performance of the proposed algorithm is analyzed using the extrinsic information transfer (EXIT) chart and verified by simulations. Results show that our approach fully exploits time domain information from the multipath channel and spatial domain information from multi receiving antennas, which efficiently improve the performance of the receiver in the severe ISI channel.     

ICCS-PW云服务器管理系统研究与设计

从ICCS-PW云服务器自身的特性入手,设计综合了电源管理、储存管理以及交换管理等多种监控方式于一身的综合性管理系统,进而对云服务器当中的资料进行集中管理。该系统通过软硬件结合的方式,配合JAXA以及CGI等前沿技术来实现,并通过Load Runner来检验系统的可行性,检验结果良好。     

新型低GWP高温热泵工质HFO-1234ze(Z)的研究进展

高温热泵可以有效回收工业余热，达到节能减排和保护环境的目的。目前，有关高温热泵技术的研究热点在于寻找一种全球变暖潜能值(GWP)低、使用性能良好的工质，以替代现有CFC-114、HFC-245fa工质。对新型环境友好型工质HFO-1234ze(Z)进行了综述，其GWP＜1，临界温度高于423 K，是一种潜在的高温热泵替代工质。总结了近年来国内外学者对HFO-1234ze(Z)的合成技术、热力学性质、输运性质、传热性能等方面的研究，并分析了HFO-1234ze(Z)在高温热泵系统中应用的可行性，认为HFO-1234ze(Z)在高温热泵中具有较好的工作性能和发展前景。     

SMA丝增强SHCC拉伸时的变形和裂纹自回复性能研究

将单根形状记忆合金(SMA)丝埋入应变硬化水泥基复合材料(SHCC)中,采用循环拉伸试验研究SMA丝的预拉伸应变大小(分别为0％、2％、4％和5.5％)对SHCC拉伸应力-应变关系、残余应变回复率、裂纹平均宽度、裂纹回复性等的影响.结果 表明,SMA丝的埋入提高了SHCC的初裂强度、极限强度和极限应变.SMA丝的预拉伸应变较大时,SMA增强SHCC的延性和强度较高.采用加热方法驱动SMA丝可使SHCC的残余应变减小,含预拉伸SMA丝的SHCC试样的变形回复率达到60％ ～ 90％,而含未预拉伸SMA丝的SHCC试样的变形回复率仅为20％～ 42％.SMA丝预拉伸应变增加时,SMA丝驱动后SHCC中裂纹的平均宽度变小.当驱动预拉伸应变为5.5％的SMA丝时,SMA增强SHCC的裂纹平均宽度约为10μm.     

Fine-grained cooperative access control scheme with hidden policies

The traditional ciphertext policy attribute-based encryption (CP-ABE) has two problems:one is that the access policy must be embedded in the ciphertext and sent, which leads to the disclosure of user爷 s privacy information, the other is that it does not support collaborative decryption, which cannot meet the actual demand of conditional collaborative decryption among multiple users. In order to deal with the above two problems at the same time, a fine-grained cooperative access control scheme with hidden policies (FCAC-HP) is proposed based on the existing CP-ABE schemes combined with blockchain technology. In FCAC-HP scheme, users are grouped by group identifier so that only users within the same group can cooperate. In the data encryption stage, the access policy is encrypted and then embedded in the ciphertext to protect the privacy information of the access policy. In the data access stage, the anonymous attribute matching technology is introduced so that only matched users can decrypt ciphertext data to improve the efficiency of the system. In this process, a smart contract is used to execute the verification algorithm to ensure the credibility of the results. In terms of security, FCAC-HP scheme is based on the prime subgroup discriminative assumption and is proved to be indistinguishable under chosen plaintext attack (CPA) by dual system encryption technology. Experimental verification and analysis show that FCAC-HP scheme improves computational efficiency while implementing complex functions.