上海外环隧道水下最终接头的施工技术

沉管隧道采用水下最终接头,可以大大缩短工期和减少成本,但施工难度较大,而且有一定风险。文章以上海外环隧道工程为例,对沉管隧道水下最终接头的施工工艺中管段轴线精度控制、安装保护罩、间隙间的安全排水和混凝土施工等四大难点进行探讨,并介绍了水密性施工和管内结构施工的具体工艺和步骤。指出其成果对今后类似工程具有较大的参考价值。     

池27井机抽排水采气效果分析

介绍了池27井实施机抽排水工艺取得累计排水13 334.4m3的明显效果.分析了五次检泵的原因.提出了对池27井机抽排水的四点认识.     

异喹啉的脉冲辐解和激光光解研究

用脉冲辐解和激光光解相结合,研究了异喹啉这种难降解杂环化合物在紫外光作用下的变化和与HO·的反应.结果表明,在波长为266nm的激光作用下,异喹啉不仅发生光激发,而且发生单光子电离,其量子产额为1.58×10-4.异喹啉光电离产生的阳离子自由基可以脱去质子,其pKa为5.50.异喹啉可以与HO·发生反应,其反应速率常数为3.4×109 mol-1·dm3·s-1.本工作的研究将为photo-Fenton法降解异喹啉提供理论上的依据.     

山西沁南煤层气井试气工艺分析

对山西沁南地区三口煤层气井试气施工工艺进行总结分析，改进了注入压降测试管柱，采用电潜泵法对煤层排采测气。对今后煤层气井的施工具有一定的指导意义。     

Frequency domain identification of Wiener models

This paper proposes a frequency domain algorithm for Wiener model identifications based on exploring the fundamental frequency and harmonics generated by the unknown nonlinearity. The convergence of the algorithm is established in the presence of white noise. No a priori knowledge of the structure of the nonlinearity is required and the linear part can be nonparametric.     

SLIMLINE+K型多功能撬装双滚筒试井绞车简介

SLIMLINE K型多功能撬装双滚筒试井绞车为整体式结构，多用于海上平台，可进行电子压力计和机械压力计试井，以及井下工具的投放、震击、打捞等完井作业。该试井绞车采用先进的数控技术，使起下纲丝／电缆实现自动化控制，该系统能够对斜井、定向井进行随钻测试。     

Intelligent Painting Process Planner for Robotic Bridge Painting

Due to increased government regulations on environment, health, and safety, the cost of on-site bridge painting has quadrupled over the past several years. The construction industry faces a great challenge in how to control the increased costs of bridge painting and meet the regulations at the same time. A possible solution to address this challenge is to develop a robotic bridge painting system. The development of the robotic system can be justified by the potential improvements in safety and productivity. This paper presents the development and testing of an Intelligent Painting Process Planner. The Planner, built based on bridge feature scheme, is the key component for the robotic bridge painting system that integrates the painting process planning, robot path planning, cost optimization, and quality control functions. During the development process, lab experiments were conducted to determine the values of painting process planning parameters and coating thickness distribution functions. Field tests demonstrated that the prototype robotic bridge painting system achieved the specified painting quality using the parameter values provided by the Planner. Areas that need to be improved in the future were also identified.     

热压/热变形Nd2Fe14B/α-Fe纳米双相永磁体的研究

为了制备各向异性块状Nd2Fe14B／α—Fe纳米双相永磁体，研究了热压／热变形工艺参数与样品微观组织结构、磁性能之间的关系。结果表明，饱和磁化强度Js随模压温度的升高而提高；而剩磁Jr、内禀矫顽力Hcj和最大磁能积(BH)max开始都随模压温度的升高而上升，但超过一定温度后反而降低；同时提高热压压力会使磁性能增加，而热变形温度对磁性能影响很小。热变形后样品垂直于压力方向的磁性能略高于平行于压力方向，呈现出轻微的各向异性。Nd2Fe14B／α—Fe纳米双相永磁材料在热压／热变形后没有产生晶粒的择优长大，在晶体学上仍然是各向同性的。     

鞍钢及鞍钢技术中心2010年前的发展战略研究

为将鞍钢及鞍钢技术中心在２０１０年前建设成为世界一流水平的钢铁企业及技术中心，提出了鞍钢及鞍钢技术中心在２０００年前和２０１０年前的发展目标，指出了鞍钢及鞍钢技术中心实现２０１０年前的发展目标应采取的战略性措施。