49MnVS3曲轴用非调质钢控轧控冷工艺技术研究及应用

49MnVS3非调质钢(/%:0.47C,0.39Si,0.90Mn,0.016P,0.050S,0.22Cr,0.09V,0.015Ti,0.011Al,0.02Ni)的生产流程为铁水预处理-60t顶底复吹转炉-LF处理-VD真空脱气-220 mm×300 mm坯连铸-控轧控冷。研究了控轧控冷工艺对49MnVS3非调质钢组织和性能的影响。φ110 mm轧材试验工艺参数:加热温度1150～1250℃、开轧温度1 0500℃、终轧温度850℃、轧后冷却速度70℃/min、冷却开始温度850℃和终止温度500℃。结果表明,试验炉次粒度提高高.5～1.0级,带状组织减轻轻0.5～1.5级,硬度、强度及塑韧性均有所提升,获得良好的强韧性匹配。     

Development of mobile miniature natural gas liquefiers

With increasing consumption of natural gas (NG), small NG reservoirs, such as coalbed methane and oil field associated gas, have recently drawn significant attention. Owing to their special characteristics (e.g., scattered distribution and small output), small-scale NG liquefiers are highly required. Similarly, the mixed refrigerant cycle (MRC) is suitable for small-scale liquefaction systems due to its moderate complexity and power consumption. In consideration of the above, this paper reviews the development of mobile miniature NG liquefiers in Technical Institute of Physics and Chemistry (TIPC), China. To effectively liquefy the scattered NG and overcome the drawbacks of existing technologies, three main improvements, i.e., low-pressure MRC process driven by oil-lubricated screw compressor, compact cold box with the new designed heat exchangers, and standardized equipment manufacturing and integrated process technology have been made. The development pattern of “rapid cluster application and flexible liquefaction center” has been eventually proposed. The small-scale NG liquefier developed by TIPC has reached a minimum liquefaction power consumption of about 0.35 kW·h/Nm³. It is suitable to exploit small remote gas reserves which can also be used in boil-off gas reliquefaction and distributed peak-shaving of pipe networks.     

An image encryption scheme based on precision limited chaotic system

Multimedia Tools and Applications - In recent years, various chaotic maps have been used for image encryption. However, most of these image encryption algorithms entail a lot of floating-point...     

析湿工况下翅片管式换热器表面粉尘沉积过程的数值模型

空调器采用翅片管式换热器作为蒸发器，在制冷工况下换热器表面发生析湿及粉尘沉积，导致性能衰减。建立湿翅片表面粉尘颗粒物沉积过程的数学模型，模拟冷凝水捕集颗粒物以及湿积灰层黏附颗粒物的过程。被冷凝水捕集的颗粒物数量等于运动轨迹与水表面轮廓会出现相交的入射颗粒物的数量；后续的入射颗粒物与湿积灰层碰撞时，部分入射颗粒物会发生沉积且部分被碰撞的已沉积湿颗粒物会发生移除，这两部分的颗粒物数量相减即为被湿积灰层黏附的颗粒物数量。模拟与实验结果的对比表明，预测的湿积灰层形状与实验照片的吻合度较好，预测的单位面积颗粒物沉积质量与91%的实验数据之间的误差在±20%之间，平均误差为11.8%。     

Formation of a protective layer against corrosion on Mg alloy via alkali pretreatment followed by vanillic acid treatment

Although Mg alloy possesses high specific strength, low density, and good biocompatibility, poor corrosion resistance hinders its further applications. In the present study, an innovative protective layer against corrosion was prepared on the AZ31 Mg alloy via alkali pretreatment followed by vanillic acid treatment. The alkali pretreatment supplied –OH for the AZ31 Mg alloy surface to react with vanillic acid. The vanillic acid treatment played a crucial role in enhancing the corrosion resistance due to the excellent ability to act as a barrier and retard aqueous solution penetration, which effectively isolated the underlying Mg alloy from the corrosive environment. The corrosion current density of alkali and vanillic acid-treated Mg alloy (AZ31V) almost showed two orders of magnitude lower values in comparison with that of the AZ31 Mg alloy, and the corrosion potential of AZ31V Mg alloy increased from −1.41 to −1.25 V. The immersion tests proved that there was no occurrence of severe corrosion. Hence, the alkali pretreatment and vanillic acid treatment may represent a promising method to improve the corrosion resistance of Mg alloy.     

Effect of ultrasonic vibration on thermal and material flow behavior,microstructure and mechanical properties of friction stir welded Al/Cu joints

Al/Cu dissimilar joint has been widely produced by using friction stir welding (FSW), but the weld quality remains limited. A recently developed ultrasonic     

某露天矿山边坡结构参数优化与支护设计

某露天矿山东帮边坡稳定性较差,已有12个区域出现大面积滑坡或垮塌,导致东帮边坡部分平台不连通,给矿山生产造成了严重的安全隐患。基于此,以边坡安全系数控制值为边坡稳定评判标准,采用极限平衡法、Geo-Slope软件计算边坡安全系数,分析边坡整体与局部的稳定性,并对不稳定区域进行参数优化研究,结果表明:东帮边坡整体滑坡的概率较低,但局部稳定性较差,需采取防护措施;边坡结构参数经优化后,边坡整体处于稳定状态。     

Tensor Q-rank: new data dependent definition of tensor rank

Machine Learning - Recently, the $${ Tensor}~{ Nuclear}~{ Norm}~{ (TNN)}$$ regularization based on t-SVD has been widely used in various low tubal-rank tensor recovery tasks. However, these models...