Modification of Fe and Al elemental powders’ sintering with addition of magnesium and magnesium hydride

An attempt to modify sintering of iron and aluminium elemental powders with use of small additions of Mg and MgH₂ was presented in this paper. The kinetics of such modified sintering was investigated using DSC technique, XRD analysis and SEM observations. Significant changes in the mechanism of exothermal formation reaction of Fe–Al intermetallic phases in compositions doped with magnesium and its hydride was observed. Initiation temperature of Self-propagating High-temperature Synthesis (SHS) reaction was pronouncedly shifted to lower value as compared with undoped composition. Influence of additions on the SHS reaction kinetics parameters was also calculated with use of the JMA model and changes of the Avrami exponent value of specific phase formation was noticed. Positive effect of MgH₂ addition on partial homogeneity of final product was also studied.     

Constrained pseudo‐transient continuation

This paper addresses the problem of finding a stationary point of a nonlinear dynamical system whose state variables are under inequality constraints. Systems of this type often arise from the discretization of PDEs that model physical phenomena (e.g., fluid dynamics) in which the state variables are under realizability constraints (e.g., positive pressure and density). We start from the popular pseudo‐transient continuation method and augment it with nonlinear inequality constraints. The constraint handling technique does not help in situations where no steady‐state solution exists, for example, because of an under‐resolved discretization of PDEs. However, an often overlooked situation is one in which the steady‐state solution exists but cannot be reached by the solver, which typically fails because of the violation of constraints, that is, a non‐physical state error during state iterations. This is the shortcoming that we address by incorporating physical realizability constraints into the solution path from the initial condition to steady state. Although we focus on the DG method applied to fluid dynamics, our technique relies only on implicit time marching and hence can be extended to other spatial discretizations and other physics problems. We analyze the sensitivity of the method to a range of input parameters and present results for compressible turbulent flows that show that the constrained method is significantly more robust than a standard unconstrained method while on par in terms of cost. Copyright © 2015 John Wiley & Sons, Ltd.     

Polyurethane/Polylactide-Based Electrospun Nonwovens as Carriers for Human Adipose-Derived Stromal Stem Cells and Chondrogenic Progenitor Cells

Articular cartilage dysfunctions are major cause of pain and disability and lead to serious health complications. Cell-based therapies are proposed as treatment methods for cartilage regeneration. In this study, we proposed polyurethane/poly(L-lactide-co-D, L-lactide)-based electrospun nonwovens as carriers for the delivery of human adipose-derived stromal stem cells. We found that 6:4 and 8:2 polyurethane/poly(L-lactide-co-D, L-lactide) initially enhance proliferative rate of human adipose-derived stromal stem cells, shorten their population doubling time, promote creation of functional chondrogenic nodules during chondrogenic differentiation, improve the collagen-2-to-collagen-1 protein ratio, and upregulate the expression of collagen-2 and aggrecan genes.     

The influence of electron beam irradiation,plastic deformation,and re‐irradiation on crystallinity degree,mechanical and sclerometric properties of GUR 1050 used for arthroplasty

The article describes the influence of an electron beam irradiation (I), plastic deformation (D), and re‐irradiation (R) on the properties of ultrahigh molecular weight polyethylene (GUR 1050). It was found that the modification through irradiation entailed a gradual increase in the degree of crystallinity (after irradiation–I). After plastic deformation and re‐irradiation (IDR) the degree of crystallinity decreases which had a direct influence on the mechanical properties. The polymer irradiation only (technique I) resulted in an increase in the maximum stress as compared with the material in the initial state. The application of deformation and re‐irradiation (technique IDR) allowed increasing the deformation resistance by more than 40%. Moreover, the irradiation with an electron beam resulted in the increase in hardness (H) and Young's modulus (E) proportionally to the applied irradiation dose and in the reduction of total indentation work (W_tot) and its components. After deformation and re‐irradiation the polyethylene hardness went down. The application of technique (I) caused an improvement to the material abrasion resistance (reduction of parameter PD–working scratch depth) with the increasing irradiation dose. The introduction of deformation and re‐irradiation did not have a material impact on parameter (PD) increasing at the same time elastic properties of UHMWPE (increase in parameter NPS–elastic recovery). Modification IDR has changed the wear mechanism (β) toward ploughing and has increased the abrasion‐resistance index (W_β) and also significantly reduced the coefficient of friction (μ) of GUR 1050. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43683.     

Artificial Maturation of the Highly Active Heterodimeric [FeFe] Hydrogenase from Desulfovibrio desulfuricans ATCC 7757

Hydrogenases catalyze the reduction of protons and oxidation of molecular hydrogen with high turnover frequencies and low overpotentials under ambient conditions. The heterodimeric [FeFe] hydrogenase from Desulfovibrio desulfuricans has an exceptionally high activity, and can be purified aerobically in an oxygen-stable inactive state. Recently, it was demonstrated that monomeric [FeFe] hydrogenases produced recombinantly in Escherichia coli can be artificially maturated by simply incubating the inactive “apo” enzymes with the synthetic [2Fe] cofactor mimic [Fe₂(adt)(CO)₄(CN)₂]²⁻. Here, we use the same technique to produce the heterodimeric “apo” hydrogenase from D. desulfuricans in E. coli with a high yield and purity, and maturate the “apo” enzyme with [Fe₂(adt)(CO)₄(CN)₂]²⁻ to generate fully active “holo” enzyme. Interestingly, the rate of the artificial maturation process with D. desulfuricans is significantly slower than that for all other hydrogenases tested so far. The artificially maturated enzyme is spectroscopically and electrochemically identical to the native enzyme and shows high rates of hydrogen production (3700 s⁻¹) and hydrogen oxidation (63,000 s⁻¹). We expect that our highly efficient production method will facilitate future studies of this enzyme and other related [FeFe] hydrogenases from Desulfovibrio species.     

Optimization of subtractive-transformative hybrid processes supported by the technological heredity concept

This paper presents the optimization procedure of a hybrid removal-forming type process based on the minimum energy consumption and demanded surface roughness which is supported by the analysis of transformation of the surface and sublayer properties termed as the technological heredity. The experimental investigation covers an alloy steel hardened to 35 HRC and 55 HRC which was initially turned using coated carbide and CBN tools and subsequently burnished to produce surfaces with Ra roughness parameter of about 0.15 μm. The modifications of the initial surface profiles, microstructure and microhardness of the sublayer were determined and relevant technological limits are selected.     

Modeling of the degradation kinetics of biodegradable scaffolds: The effects of the environmental conditions

The rate of hydrolytic degradation of tissue‐engineered scaffolds made from bioresorbable polyesters is dependent on several factors. Some are related to the properties of the degrading polymeric material, but others are related to the geometry of the porous structure and the operating environment. It is well known that the rate of hydrolytic degradation of a given object, porous or nonporous, is lower when it is exposed to dynamic conditions, a flowing medium, than when it operates in static conditions. The most likely reason is the more efficient removal of the acidic degradation products from the vicinity of the polymeric material when it is operating in a flowing medium. In this article, we present a new phenomenological reaction–diffusion model of aliphatic polymer degradation. The model can be used to predict the significance of various factors in in vitro degradation tests, with particular reference to the flow of the degradation medium, and the frequency of medium replacement in the case of static conditions. The developed model was used to simulate the degradation of poly(dl ‐lactide‐co‐glycolide) scaffolds with different porosities subjected to static and dynamic testing conditions. The results confirm that the porosity of the scaffold had a significant influence on the degradation rate. It was shown that the combination of dynamic conditions and high porosity effectively reduced the mass loss and molecular weight loss of the degrading polymer. However, the effect of changes in the velocity of the flowing medium had a negligible effect on the rate of degradation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40280.     

Clickable poly(ionic liquid)s for modification of glass and silicon surfaces

Covalent attachment of poly(ionic liquid)s (PILs) by click chemistry on glass or silicon (Si) surfaces was performed. Poly[1-(4-vinylbenzyl)-3-butylimidazolium bis(trifluoromethylsulfonyl)imide] (polyVBBI⁺Tf₂N⁻), and copolymers of polyVBBI⁺Tf₂N⁻ with fluorescein O-methacrylate were synthesized by conducting an atom transfer radical polymerization (ATRP) from initiators containing azide or thioacetate groups. The azide- and thiol-terminated PILs were then successfully grafted onto alkyne and alkene modified glass/Si wafers by thermal azide–alkyne cycloaddition and photoinitiated thiol-ene click reactions, respectively. The modified surfaces were characterized by contact angle measurements and ellipsometry. The fluorescent PIL functionalized surfaces showed strong fluorescence under UV irradiation. This procedure of tethering PILs to substrates also provides an easy way to change the surface hydrophilicity by replacing the anions in the grafted PILs. The present approach could be readily applied for surface modifications with other types of PILs or their copolymers to achieve different functionalities on various surfaces.