IKONOS image fusion process using steepest descent method with bi-linear interpolation

There are many image fusion processes to produce a high-resolution multispectral (MS) image from low-resolution MS and high-resolution panchromatic (PAN) images. But the most significant problems are colour distortion and fusion quality. Previously, we reported a fusion process that produced a1 m resolution IKONOS fused image with minimal spectral distortion. However, block distortion appeared at the edge of the curved sections of the fused image, which was reduced by performing the wavelet transformation as a post-process. Here, we propose an image fusion process using the steepest descent method with bi-linear interpolation, which can remove block distortion without using wavelet transformation. Bi-linear interpolation provides the proper initial values of the fused image, and then the steepest descent method produces the optimum results of the fusion process. These results achieve improvement on the spectral as well as spatial quality of a1 m resolution fused image when compared with other existing methods and remove block distortion completely.     

Nonintrusive appliance load monitoring based on integer programming

This paper presents a new nonintrusive appliance load monitoring technique based on integer programming. Nonintrusive appliance load monitoring is the problem of identifying the operating conditions of electric appliances in a house by observing only the overall load current and voltage. Since the overall load current is expressed as a superposition of the currents of the operating appliances, the monitoring problem can be formulated as an integer quadratic programming problem by expressing the operating conditions as integer variables. This problem is solvable with a sufficiently small computational burden thanks to the recent development of commercial software. The proposed method does not require relearning even when a new appliance is installed in the house. Furthermore, the proposed formulation is applicable to cases in which some appliance has multiple modes, and cases in which some appliances of the same type are operating simultaneously. The usefulness of the proposed technique is verified by experimental results. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(2): 18–25, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21040     

Translucent Mg-α-Sialon Ceramics Prepared by Spark Plasma Sintering

The translucent Mg-α-sialon ceramics have been prepared by spark plasma sintering (SPS) α-Si₃N₄ powder with AlN and MgO as the additives at 1850°C for 5 min. The sample possesses a uniform, dense microstructure under the rapid densification of SPS process. The translucent Mg-α-sialon ceramics achieve the maximum transmittance of 66.4% for the sample of 0.5 mm in thickness in the medium infrared region, which could be attributed to the equiaxed microstructure and few glassy phase confirmed by the observation of transmission electron microscopy. The material also exhibits good mechanical properties of high hardness (21.4±0.3 GPa) and fracture toughness (6.1±0.1 MPa·m^1/2).     

Hydrocracking of diphenylmethane and tetralin over bifunctional NiW sulfide catalysts supported on three kinds of zeolites

Hydrocracking reactions of diphenylmethane and tetralin were carried out over three kinds of zeolites with or without NiW sulfide to discuss the roles of catalytic bifunctionality in two types of hydrocracking reactions. It was found that strong acid sites were not needed for the hydrocracking of diphenylmethane, while the conversion of tetralin required relatively strong acid sites. Ultra-stable Y zeolite with strong acidity exhibited high hydrocracking activity for both reactions. In contrast, mordenite catalysts did not show high activity for either hydrocracking, though isomerization of tetralin and excess hydrocracking to gaseous products proceeded. The superior performances of ultra-stable Y zeolite in the tetralin hydrocracking were suggested to be related to the hydrogen transfer ability. In most cases, the loading of NiW sulfide enhanced catalytic activity. In the diphenylmethane hydrocracking, the role of NiW sulfide was found to supply active hydrogen to the hydrocracking active sites on zeolite and to prevent polymerization of benzyl cations. In the tetralin hydrocracking, the dehydrogenated products from tetralin were re-hydrogenated over NiW sulfide.     

Location of the egocenter in kinesthetic space.

The location of the egocenter in kinesthetic space was investigated in 4 experiments. Participants, with their eyes closed, adjusted a comparison stimulus after or while touching a standard in a transverse plane at the belly or shoulder level so that they perceived the line joining the comparison and the fixed standard as pointing directly at themselves. The mean location of the intersections of the obtained lines was taken as the location of the egocenter. The main results showed that the location of the kinesthetic egocenter depended on the hand or hands used for touching, the timing of touching, and the distance of the standard from the participant. Implications of these results were discussed in relation to models of the kinesthetic egocenter. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Chlorophyll assembled electrode for photovoltaic conversion device

Chlorophyll-a (Chl-a) assembled in hydrophobic domain by fatty acid with long alkyl hydrocarbon chain such as myristic acid (Myr), stearic acid (Ste) and cholic acid (Cho) modified onto nanocrystalline TiO₂ electrode is prepared and the photovoltaic properties of the nanocrystalline TiO₂ film by Chl-a are studied. Incident photon to current efficiency (IPCE) value at 660 nm in photocurrent action spectrum of Chl-a/Ste-TiO₂, Chl-a/Myr-TiO₂ and Chl-a/Cho-TiO₂ electrodes are 5.0%, 4.1% and 4.1%, respectively. Thus, the IPCE is maximum using Chl-a/Ste-TiO₂ electrode. From the results of photocurrent responses with light intensity of 100 mW cm⁻² irradiation or monochromatic light with 660 nm, generated photocurrent increases using Chl-a/Ste-TiO₂ electrode compared with the other Chl-a assembled TiO₂ electrodes. These results show that the hydrophobic domain formed by stearic acid with long alkyl hydrocarbon chain is suitable for fixation of Chl-a onto TiO₂ film electrodes and photovoltaic performance is improved using Chl-a onto Ste-TiO₂ film electrode.     

Periodical shedding of cloud cavitation from a single hydrofoil in high-speed cryogenic channel flow

In order to explain criteria for periodical shedding of the cloud cavitation, flow patterns of cavitation around a plano-convex hydrofoil were observed using a cryogenic cavitation tunnel of a blowdown type. Two hydrofoils of similarity of 20 and 60 mm in chord length with two test sections of 20 and 60 mm in width were prepared. Working fluids were water at ambient temperature, hot water and liquid nitrogen. The parameter range was varied between 0.3 and 1.4 for cavitation number, 9 and 17 m/sec for inlet flow velocity, and −8° and 8° for the flow incidence angle, respectively. At incidence angle 8°, that is, the convex surface being suction surface, periodical shedding of the whole cloud cavitation was observed on the convex surface under the specific condition with cavitation number and inlet flow velocity, respectively, 0.5, 9 m/sec for liquid nitrogen at 192°C and 1.4, 11 m/sec for water at 88°C, whereas under the supercavitation condition, it was not observable. Periodical shedding of cloud cavitation occurs only in the case that there are both the adverse pressure gradient and the slow flow region on the hydrofoil.     

A novel photoreactive amphiphile of nitrophenylazide for immobilization of bioactive proteins

Monolayers of an amphiphilic nitrophenylazide (ANPA) derivative were prepared and their ability to immobilize a protein molecule by a photochemical binding reaction was demonstrated as a novel means to constitute a biofunctional membrane. Molecular orientations and photoreactions in the ANPA monolayers were investigated by Fourier transform IR spectroscopy. Rapid photolysis of ANPA was observed which reflects decomposition of the azide group to a reactive nitrene radical intermediate. As an enzyme, glucose oxidase (GOD) was immobilized on a monomolecular film of ANPA, coated on a substrate, by means of enzyme adsorption at the solid-solution interface and subsequent photolysis of ANPA. Radioisotope labelling experiments revealed that the enzyme was immobilized at a high surface concentration which corresponds to a closely packed monolayer of GOD. The specific activity of the immobilized enzyme was estimated to be high compared with those of other systems involving the adsorption of this enzyme. The usefulness of the present technique for fabricating biofunctional monolayer assemblies is discussed.