Geothermal power production from abandoned oil wells

A simulation for the determination of geothermal power production from abandoned oil wells by injecting and retrieving a secondary fluid was performed. The analysis takes into consideration local geothermal gradients and typical well depths and pipe diameters. Isobutane is chosen as the secondary fluid, which is injected in the well at moderate pressures and allowed to heat up and produce vapor. The computational model that was developed takes into account mass, energy, and momentum conservation equations for the well flow, and the simulation helps determine the state of the fluid from injection to retrieval. It is observed that the operation of such systems attains a maximum power that depends on the temperature of the well bottom and the injection pressure. In general, 2–3 MW of electric power may be produced from wells that are typical in the South Texas region.     

Temperature programmed CVD: a novel technique to investigate carbon nanotube synthesis on FeMo/MgO catalysts

In this work, it is demonstrated how a novel technique based on temperature-programmed chemical vapor deposition (TPCVD) can be used to investigate the synthesis of carbon nanotubes (CNTs) from methane on a classic catalyst FeMo(x)/MgO (x = 0.07, 0.35 and 1.00). TPCVD monitors carbon deposition by measuring H2 formed during CH4 decomposition and affords information on the different catalytic species, deactivation process, reaction kinetics and carbon yields. The obtained results showed for FeMgO catalyst a simple TPCVD peak related to the production of carbon beginning at 760 degrees C with maximum at 800 degrees C followed by a rapid deactivation resulting in a low carbon yield. The addition of Mo to Fe/MgO catalyst completely changes the TPCVD profile with the formation of a new catalytic species active at temperatures higher than 900 degrees C, which is stable and continuously decomposes CH4 to produce high carbon yields. Raman, TG/DTG, M?ssbauer, SEM, TEM, XRD and TPR analyses suggested that this active catalytic phase is likely related to Fe-Mo and Fe-Mo-C phases active to produce single wall and mainly multiwall carbon nanotubes.     

Repair and stabilization in confined nanoscale systems — inorganic nanowires within single-walled carbon nanotubes

Repair is ubiquitous in biological systems, but rare in the inorganic world. We show that inorganic nanoscale systems can however possess remarkable repair and reconfiguring capabilities when subjected to extreme confinement. Confined crystallization inside single-walled carbon nanotube (SWCNT) templates is known to produce the narrowest inorganic nanowires, but little is known about the potential for repair of such nanowires once crystallized, and what can drive it. Here inorganic nanowires encapsulated within SWCNTs were seen by high-resolution transmission electron microscopy to adjust to changes in their nanotube template through atomic rearrangement at room temperature. These observations highlight nanowire repair processes, supported by theoretical modeling, that are consistent with atomic migration at fractured, ionic ends of the nanowires encouraged by long-range force fields, as well as release-blocking mechanisms where nanowire atoms bind to nanotube walls to stabilize the ruptured nanotube and allow the nanowire to reform. Such principles can inform the design of nanoscale systems with enhanced resilience.      

Impact of incomplete DNase I treatment on human macrophage proteome analysis

The aim of our study was to analyze the proteomic pattern of human macrophages obtained over a 4 year period from blood donors. The purpose was to simulate a long-term clinical study to assess the application of 2-D DIGE technique for differential proteomic analysis of these scarce samples. Bioinformatic analysis of 2-D DIGE gels of 19 different cultures of macrophages assessed whether they did or did not contain at least specific five spots identified by MS as being or containing bovine deoxyribonuclease I (DNase I). Bovine DNase I was used during sample treatment to remove nucleic acids from protein extracts. Macrophages were classified in two groups, which appeared to be differentiated by the completeness of DNase I treatment. Further detailed analysis revealed a different proteomic pattern of macrophage protein samples according to the completeness of this treatment. The major group of proteins affected, accounting for one third of the differentially expressed proteins, included proteins involved in cell motion and actin cytoskeleton reorganization. The use of DNase I for the removal of nucleic acids from protein samples must be avoided in proteomic studies since it can generate bias in the analysis of protein expression patterns.     

The Difference of Material Wettability as Critical Factor in the Choice of a Tribological Prosthetic Coupling Without Debris Release

Today, in spite of the long experience acquired in the field of total hip replacements, prosthetic systems are still far from reproducing the natural system. One of the main causes of long term failure is the amount of wear debris produced by the tribological coupling between acetabolar cup and femoral head. The authors carried out experimental research in order to investigate the tribological coupling of various prosthetic biomaterials. Experimental tests were carried out with the pin-on-disc tribometer in dry, water and human serum as lubricant. This study sets new bases for the design of modern hip prostheses: 1. the wettability difference among the materials in tribological coupling, which is the necessary condition to promote efficient lubrication; 2. the use of Peek reinforced with long and unidirectional carbon fibres in the prosthetic field     

Anticancer Potential of Betulonic Acid Derivatives

Clinical trials have evidenced that several natural compounds, belonging to the phytochemical classes of alkaloids, terpenes, phenols and flavonoids, are effective for the management of various types of cancer. Latest research has proven that natural products and their semisynthetic variants may serve as a starting point for new drug candidates with a diversity of biological and pharmacological activities, designed to improve bioavailability, overcome cellular resistance, and enhance therapeutic efficacy. This review was designed to bring an update regarding the anticancer potential of betulonic acid and its semisynthetic derivatives. Chemical derivative structures of betulonic acid including amide, thiol, and piperidine groups, exert an amplification of the in vitro anticancer potential of betulonic acid. With the need for more mechanistic and in vivo data, some derivatives of betulonic acids may represent promising anticancer agents.     

BiFeO3-synthesis,characterization and its photocatalytic activity towards doxorubicin degradation from water

Pure bismuth ferrite was successfully obtained through the thermolysis of new bismuth ferrioxalate coordination compound, namely BiFe(C₂O₄)₃·3H₂O. The synthesized precursor was characterized by chemical analysis, infrared spectroscopy and thermal analysis. The bismuth ferrite obtained after a heating treatment of the precursor for at 450–800?°C/1?h was investigated by X-ray diffraction, FE-SEM, TEM and HRTEM. The obtained pure bismuth ferrite nanoparticles (480?°C) was tested as photocatalyst towards the degradation of doxorubicin (DOX), a well-known anti-cancer drug commonly used for the treatment of various cancer types, which has been detected in hospital effluent water. The comparative results of DOX degradation through photolysis and photocatalysis under UV irradiation showed a great photocatalytic activity of bismuth ferrite towards DOX degradation and mineralization from water. The kinetics aspects were discussed based on the first-order kinetics model that fitted the best the experimental photocatalysis results.     

Prognostic significance of 25‐hydroxivitamin D entirely explained by a higher comorbidity burden: Experience from a South‐Eastern European Dialysis Cohort

Vitamin D deficiency is still a common problem particularly in the elderly and in individuals with various degrees of renal impairment. The present study aimed to evaluate the association between plasma concentrations of 25(OH)D and death in a large cohort of prevalent patients on hemodialysis (HD) from south‐east Romania, a typical Balkan region. This is an observational prospective study that included a total of 570 patients on maintenance HD. Study patients were classified into three groups by baseline 25(OH)D levels: (1) sufficient 25(OH)D—i.e., >30 ng/mL; (2) insufficient 25(OH)D—i.e., between 10 and 29 ng/mL; and (3) deficient 25(OH)D—i.e., <10 ng/mL. During the follow‐up period of 14 months, 68 patients (11.9%) died, the Kaplan–Meier analysis showing significant differences in all‐cause mortality for chronic kidney disease patients in different 25(OH)D groups (P = 0.002). Unadjusted Cox regression analysis also showed significant differences in survival. The multivariate Cox regression model showed no significant differences in survival according to vitamin D levels. Hazard ratio for death in the “<10 ng/mL” group was 1.619 (P = 0.190) and in the “10–30 ng/mL” group was 0.837 (P = 0.609). In our dialysis population with a high comorbidity burden, low 25(OH)D concentration was not associated with mortality in the adjusted Cox model, suggesting that vitamin D deficiency could represent only a non‐specific marker for a poor health status, with less impact on mortality.     

Designing gluten-free,anthocyanins-enriched cookies on scientific basis

The essential treatment of the coeliac disease is a strict lifelong gluten-free diet based on the avoidance of gluten, thus requiring new perspectives for identifying technological and functional alternatives for gluten-free products, with similar functionality and efficiency. Therefore, the objective of this study was to explore the potential of purple corn flour (PCF) as a functional and technological alternative to design new gluten-free, anthocyanins-enriched cookies. The PCF was characterised in terms of phytochemical and antioxidant activity, yielding an extract with a total anthocyanin content of 14.94 ± 0.68 mg cyanidin-3-O-glucoside (C3G) per g dry weight (DW). The results of the thermo-mechanical tests indicated that composite flour consisting of rice flour (RF, 75%) and PCF (25%) is suitable for obtaining gluten-free cookies. Tests showed increased anthocyanin content in cookies with 75% addition of PCF, up to 6.99 ± 0.20 mg C3G per 100 g DW, yielding an antioxidant activity of 18.46 ± 0.18 mm Trolox equivalents per g DW. The ELISA test confirmed the absence of prolamins recognised by the monoclonal antibody R5. The sensory analysis revealed that the substitution of RF with PCF had no significant influence on overall acceptability. The results of the shelf-life tests performed on the cookies showed slight variation in phytochemicals in both variants, influencing the antioxidant activity. The obtained results may bring potential benefits to people on restricted diets and coeliac consumers, which can benefit from a contribution of bioactives, with significant health benefits.