Lecane tenuiseta rotifers improves activated sludge settleability in laboratory scale SBR system at 13°C and 20°C

Two experiments at different temperatures were conducted in five laboratory‐scale bioreactors with enhanced nutrient removal simulating the work of sequencing batch reactors (SBRs). The process was operated in three 8‐hour cycles. The oxygen concentration, pH and temperature were controlled and maintained at 1 mg of O₂/L, 7 and 13°C, respectively, throughout the first two weeks and at 20°C for the next 10 days. The introduction of Lecane tenuiseta improved the settling properties of the activated sludge dominated by Microthrix parvicella at both temperatures tested. L. tenuiseta rotifers led to a reduction in filamentous bacteria abundance and did not negatively affect the chemical parameters of the effluent. For each temperature, there were no differences in COD, N_tot, N‐NH₄ or P‐PO₄ values between the treatment and control bioreactors. The results have shown that the application of L. tenuiseta is a promising biological tool for bulking prevention especially in a cold season.     

Behaviour of Dietary Fibre Supplements During Bread Dough Development Evaluated Using Novel Farinograph Curve Analysis

A regression model composed of two sigmoid functions with variable asymptotes was developed and used to analyse the dietary fibre supplement behaviour during bread dough mixing. Using eight commercial dietary fibres of different botanical origin and model wheat starch-gluten flour, farinograph curves for fibre-flour blends and for the flour only were performed. After smoothing of the curves with the regression model, difference farinograms as the fibre supplementation effects were determined. The results showed that the difference farinograms had two peaks, whose shape was strongly differentiated by the studied supplements. The presence of both peaks allowed distinguishing two kinds of the rheological activity of each fibre supplement: weakening and strengthening of the consistency of bread dough during its development. The carrot, oat, cranberry, and cacao fibres exhibited dominance of strengthening over weakening action. While chokeberry, carob, apple, and flax fibres were characterised by dominance of weakening over strengthening action. The analysis of both position and height of the peaks in the difference farinogram can be also helpful for determination of hydration kinetics of the fibres used for bread supplementation.     

A comprehensive meta-analysis on evidence of Mediterranean diet and cardiovascular disease: Are individual components equal?

Many studies have reported that higher adherence to Mediterranean diet may decrease cardiovascular disease (CVD) incidence and mortality. We performed a meta-analysis to explore the association in prospective studies and randomized control trials (RCTs) between Mediterranean diet adherence and CVD incidence and mortality. The PubMed database was searched up to June 2014. A total of 17 studies were extracted and 11 qualified for the quantitative analysis. Individuals in the highest quantile of adherence to the diet had lower incidence [relative risk (RR): 0.76, 95% confidence intervals (CI): 0.68, 0.83] and mortality (RR: 0.76, 95% CI: 0.68, 0.83) from CVD compared to those least adherent. A significant reduction of risk was found also for coronary heart disease (CHD) (RR: 0.72, 95% CI: 0.60, 0.86), myocardial infarction (MI) (RR: 0.67; 95% CI: 0.54, 0.83), and stroke (RR: 0.76; 95% CI: 0.60, 0.96) incidence. Pooled analyses of individual components of the diet revealed that the protective effects of the diet appear to be most attributable to olive oil, fruits, vegetables, and legumes. An average reduced risk of 40% for the aforementioned outcomes has been retrieved when pooling results of RCTs. A Mediterranean dietary pattern is associated with lower risks of CVD incidence and mortality, including CHD and MI. The relative effects of specific food groups should be further investigated.     

Structural and electrical properties of Cr-doped SrTiO3 porous materials

Series of single-phase materials with assumed formula SrTi_1?xCr_xO₃ (where x = 0, 1, 4, 6 mol.%) were obtained by sol-gel method. The structure and microstructure of materials were characterised by X-ray diffraction and scanning electron microscopy methods. Moreover, the study of electrical properties and evaluation of chemical stability in CO₂/H₂O atmosphere was performed by electrochemical impedance spectroscopy and thermogravimery methods, respectively. The possibility of participation of Cr-doped strontium titanate in oxidation–reduction processes was analysed by temperature-programed reduction (TPR) and temperature-programed oxidation (TPOx) measurements. The changes of lattice parameters together with XPS analysis, the Seebeck coefficient measurements results and TPR profiles obtained for SrTi_1?xCr_xO₃ materials prove the presence of chromium on +3 and +6 oxidation stages. Thus, chromium can be treated as both acceptor- and donor-type dopant in the SrTiO₃ structure. The Cr³⁺/Cr⁶⁺ ratio strongly affects the electrical properties, as the change of conduction mechanism was observed. The results of performed stability test clearly indicate that incorporation of chromium into SrTiO₃ structure results with decrease of chemical stability in CO₂ atmosphere.     

Application of biosensors in early detection of contamination with lactic acid bacteria during apple juice and concentrate production

The aim of Collective Research Project QUALI-JUICE (COLL-CT-2005, Co Nr 012461) was to introduce the biosensors in control of microbiologically pure apple juice production. Three commercial lactate biosensors were used and compared with enzyme kits assays. Parallel the microbiological analysis of the production process at one juice producing enterprise was done. The results of lactic acid assay with biosensors were in good correlation with those obtained by enzyme kits. The main benefit of biosensor use was shortening of measurement time as compared with assay by enzyme kit and possibility to measure at line. The concentration of l-lactic acid in apple pulp could be correlated with the number of lactic acid bacteria. Pasteurization process was eliminating lactic acid bacteria and the concentration of lactic acid was at this stage not exceeding 0.1 g L⁻¹. The final product (apple concentrate) contained in some cases very high amounts of lactic acid indicating secondary microbiological contamination after pasteurization step. Parallel microbiological analysis of production process and lactate assay indicated that the critical point during production was prolonged vacuum filtration after pasteurization.     

Sprouted wheat grain with ferritin overexpression as a potential source of iron for cereal product fortification

Grains of winter wheat (Korweta variety) were partially germinated in an abiotic stress condition (0–15 mM FeSO₄ solutions) in order to accumulate iron by ferritin overexpression. The physical, chemical, biochemical properties and technological parameters of the obtained material as well as their resistance to an insect storage pest—granary weevil—were analyzed. Sprouted wheat grains with overexpression of ferritin contain 52 times more iron, more than 50 % in form of ferritin. The contents of reducing sugars, crude protein, fiber and ash as well as amylolytic activity increased significantly in sprouted wheat grain, while starch, fat, wet gluten, falling number and inhibition activity against granary weevil α-amylase decreased. Germinated wheat grain enriched with iron strongly affected granary weevil developmental parameters. Despite the fact that technological parameters of the product were deteriorated, it is worth to consider this material application as an iron supplement for cereal products, when the application of soybean is impossible.     

Stripping of copper coatings from steel in Cr(VI)-free commercial bath

In this work the electrochemical characteristics of copper and steel in chromate, cyanide, and phosphate baths as well as in a commercial bath (ENSTRIP S-180), in the absence of chromium and cyanides were determined. Average rates of copper coatings stripping from steel in the above mentioned baths and the baths influence on the morphology of steel surfaces were described. It was found that the commercial bath ENSTRIP S-180 could be successfully used for stripping of copper coatings from steel elements.     

Development of a surface to increase retinal pigment epithelial cell (ARPE-19) proliferation under reduced serum conditions

Age related macular degeneration of the eye is brought about by damage to the retinal pigment epithelium (RPE) and is a major cause of adult blindness. One potential treatment method is transplantation of RPE cells grown in vitro. Maintaining RPE cell viability and physiological function in vitro is a challenge, and this must also be achieved using materials that can be subsequently used to deliver an intact cell sheet into the eye. In this paper, plasma polymerisation has been used to develop a chemically modified surface for maintaining RPE cells in vitro. Multiwell plates modified with a plasma copolymer of allylamine and octadiene maintained RPE cell growth at a level similar to that of TCPS. However, the addition of bound glycosaminoglycans (GAGs) to the plasma polymerised surface significantly enhanced RPE proliferation. Simply adding GAG to the culture media had no positive effect. It is shown that a combination of plasma polymer and GAG is a promising method for developing suitable surfaces for cell growth and delivery, that can be applied to any substrate material.     

Mechanical and Tribological Properties of Thin Remote Microwave Plasma CVD a-Si:N:C Films from a Single-Source Precursor

Silicon carbonitride (a-Si:N:C) films produced by remote plasma chemical vapor deposition (RP-CVD) were investigated. Tetramethyldisilazane as a single-source precursor and (H₂+N₂) upstream gas mixture for plasma generation were used. The influence of the upstream gas composition on the structure, density, mechanical and tribological properties of the films deposited on p-type Si (001) wafers (both heated—T _s =300°C and unheated—T _s =30°C) are reported. The H₂ RP-CVD process was found to result in the formation of outstanding low friction (0.04) and high hardness (H=27-31 GPa) a-Si:N:C films exhibiting promisingly high H/E values.     

How many protein‐coding genes are there in the Saccharomyces cerevisiae genome?

We have compared the results of estimations of the total number of protein-coding genes in the Saccharomyces cerevisiae genome, which have been obtained by many laboratories since the yeast genome sequence was published in 1996. We propose that there are 5300-5400 genes in the genome. This makes the first estimation of the number of intronless ORFs longer than 100 codons, based on the features of the set of genes with phenotypes known in 1997 to be correct. This estimation assumed that the set of the first 2300 genes with known phenotypes was representative for the whole set of protein-coding genes in the genome. The same method used in this paper for the approximation of the total number of protein-coding sequences among more than 40 000 ORFs longer than 20 codons gives a result that is only slightly higher. This suggests that there are still some non-coding ORFs in the databases and a few dozen small ORFs, not yet annotated, which probably code for proteins.