Viscoelastic properties of poly(ε‐caprolactone)/clay nanocomposites in solid and in melt state

Viscoelastic properties in solid and in melt state of poly(ε‐caprolactone), PCL, nanocomposites with organomodified clays (Cloisite30B and Cloisite15A) are thoroughly investigated. Although WAXD is insensitive to the difference in the nanocomposites structure, the melt rheology reveals pronounced differences between the two series. Melt yield stress values, obtained from fittings by the Carreau–Yasuda model, are used as a measure of partial exfoliation of the clay. Temperature dependence of the shift factors, used for time–temperature superposition of the modulus curves, yields similar values of the flow activation energies for all the samples. Temperature dependences of the dynamic modulus and loss factor of solid nanocomposites were correlated to the structural differences deduced from the melt rheology. The increase in the storage modulus is compared to the theoretical predictions from the Halpin–Tsai model. The effective aspect ratio obtained from this comparison agrees reasonably with the value estimated from the melt rheology. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42896.     

Synthesis,spectroscopic characterisation,and potential application of dyes containing a carbostyril skeleton as sensors for thiols

Several dyes based on a carbostyril skeleton were synthesised and characterised using proton nuclear magnetic resonance spectroscopy and electron ionisation mass spectrometry. Their basic spectroscopic properties, such as absorption and emission spectra, were also measured. The behaviour of the obtained dyes in the absence and presence of thiol amino acids and other compounds under various conditions were studied. These dyes contain various moieties in the structure, acting as Michael acceptors. Results show that the studied compounds have the potential to act as colorimetric sensors for thiols, but the benzothioazolium dyes are less effective than dicyanoethylene derivatives.     

High temperature monoclinic-to-tetragonal phase transition in magnesium doped lanthanum ortho-niobate

Magnesium doped lanthanum ortho-niobate (La_0.98Mg_0.02NbO₄) was prepared by the molten salt synthesis method. X-ray diffraction and dilatometry methods were used to study high temperature behavior of the ceramic material. Special attention was paid to the phase transition between the monoclinic and tetragonal phases. The values of spontaneous strain on the basis of unit cell parameter, obtained by Rietveld refinement, have been calculated as well as Landau order parameter. The thermal expansion coefficient (TEC) of La_0.98Mg_0.02NbO₄ was determined to be 12×10^?6 1/K and 8×10^?6 1/K below and above 500 °C, respectively.     

Toward a multi-culture adaptive virtual tour guide agent with a modular approach

Embodied conversational agents (ECAs) are computer-generated, human-like characters that interact with human users in face-to-face conversations. ECA is a powerful tool for representing cultural differences and is suitable for interactive training or edutainment systems. This article presents preliminary results from the development of a culture-adaptive virtual tour guide agent for serving Japanese, Croatian, and general Western users by displaying appropriate verbal and non-verbal behaviors. It is being implemented in Generic ECA Framework, a modular framework for developing ECAs. Dividing the ECA functions into reusable and loosely coupled modules minimizes the effort required to implement additional behavior and facilitates incremental scale up of the system.     

Suitability of some selected maize hybrids from Serbia for the production of bioethanol and dried distillers' grains with solubles

BACKGROUND: Bioethanol is mostly produced from starchy parts of the corn grain kernel leaving significant amounts of valuable by‐products such as dried distillers' grains with solubles (DDGS) which can be used as a substitute for traditional feedstuff. The suitability of six maize hybrids from Serbia was investigated for bioethanol and DDGS production. The correlation between physical and chemical characteristics of the grain, bioethanol yield and quality of the corresponding DDGS was assessed. RESULTS: All hybrids had very different chemical composition and physical characteristics which could allow various applications. The highest bioethanol yield (94.5% of theoretical) and volumetric productivity (2.01 g l^?1 h^?1) were obtained with hybrid ZP 434 and the lowest with ZP 611k. Regarding chemical composition, all DDGS samples manifested good properties as feed components. Their protein content was higher compared to the kernel. In addition, the samples showed high digestibility and high mineral content, especially of calcium and phosphorus. CONCLUSION: A hybrid ZP 434 was selected as the most promising bioethanol producer. This property is attributed to the highest level of soft endosperm which is more susceptible to starch‐hydrolysing enzymes. A high yield potential per hectare makes it the best candidate for commercial bioethanol production. © 2012 Society of Chemical Industry     

Assessment of bottom-up sectoral and regional mitigation potentials

The greenhouse gas mitigation potential of different economic sectors in three world regions are estimated using a bottom-up approach. These estimates provide updates of the numbers reported in the Fourth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC AR4). This study is part of a larger project aimed at comparing greenhouse gas mitigation potentials from bottom-up and top-down approaches. The sectors included in the analysis are energy supply, transport, industry and the residential and service sector. The mitigation potentials range from 11 to 15 GtCO₂eq. This is 26–38% of the baseline in 2030 and 47–68% relative to the year 2000. Potential savings are estimated for different cost levels. The total potential at negative costs is estimated at 5–8% relative to the baseline, with the largest share in the residential and service sector and the highest reduction percentage for the transport and industry sectors. These (negative) costs include investment, operation and maintenance and fuel costs and revenues at moderate discount rates of 3–10%. At costs below 100 US$/tCO₂, the largest potential reductions in absolute terms are estimated in the energy supply sector, while the transport sector has the lowest reduction potential.     

How many protein‐coding genes are there in the Saccharomyces cerevisiae genome?

We have compared the results of estimations of the total number of protein-coding genes in the Saccharomyces cerevisiae genome, which have been obtained by many laboratories since the yeast genome sequence was published in 1996. We propose that there are 5300-5400 genes in the genome. This makes the first estimation of the number of intronless ORFs longer than 100 codons, based on the features of the set of genes with phenotypes known in 1997 to be correct. This estimation assumed that the set of the first 2300 genes with known phenotypes was representative for the whole set of protein-coding genes in the genome. The same method used in this paper for the approximation of the total number of protein-coding sequences among more than 40 000 ORFs longer than 20 codons gives a result that is only slightly higher. This suggests that there are still some non-coding ORFs in the databases and a few dozen small ORFs, not yet annotated, which probably code for proteins.     

Improved semiconductor-laser dynamics from induced population pulsation

This paper investigates theoretically the modification of dynamical properties in a semiconductor laser by a strong injected signal. It is found that enhanced relaxation oscillations are governed by the pulsations of the intracavity field and population at frequencies determined by the injected field and cavity resonances. Furthermore, the bandwidth enhancement is associated with the undamping of the injection-induced relaxation oscillation and strong population pulsation effects. There are two limitations to the modulation-bandwidth enhancement: Overdamping of relaxation oscillation and degradation of flat response at low frequencies. The injected-laser rate-equations used in the investigation reproduce the relevant aspects of modulation-bandwidth enhancement found in the experiment on injection-locked vertical-cavity surface-emitting lasers.     

Optimisation and significance of ATP analysis for measuring active biomass in granular activated carbon filters used in water treatment

A method for determining the concentration of active microbial biomass in granular activated carbon (GAC) filters used in water treatment was developed to facilitate studies on the interactions between adsorption processes and biological activity in such filters. High-energy sonication at a power input of 40 W was applied to GAC samples for the detachment of biomass which was measured as adenosine triphosphate (ATP). Modelling of biomass removal indicated that a series of six to eight sonication treatments of 2 min each yielded more than 90% of the attached active biomass. The ATP concentrations in 30 different GAC filters at nine treatment plants in The Netherlands ranged from 25 to 5000 ng ATP cm(-3) GAC, with the highest concentrations at long filter run times and pretreatment with ozone. A similar concentration range was observed in nine rapid sand (RS) filters. ATP concentrations correlated significantly (p<0.05) with total direct bacterial cell counts in each of these filter types, but the median value of the ATP content per cell in GAC filters (2.1 x 10(-8) ng ATP/cell) was much lower than in the RS filters (3.6 x 10(-7) ng ATP/cell). Average biofilm concentrations ranging from 500 to 10(5) pg ATP cm(-2) were calculated assuming spherical shapes for the GAC particles but values were about 20 times lower when the surface of pores >1 microm diameter is included in these calculations. The quantitative biomass analysis with ATP enables direct comparisons with biofilm concentrations reported for spiral wound membranes used in water treatment, for distribution system pipes and other aquatic environments.