Changes in the sensitivity to appetitive and aversive arousal across adulthood.

In 2 cross-sectional studies, the authors examined age-related differences in the evaluation of emotional stimuli in 2 community samples, with participants ranging in age from young to older adulthood (18–81 years old). Pictures of the International Affective Picture System were used in Study 1, and written verbs were used in Study 2. Participants rated these stimuli along the 2 major affective dimensions of hedonic valence and emotional arousal, thus yielding a 2-dimensional affective space for each participant. Young adults showed the expected pattern of 2 distinct clusters of stimuli in this space, representing increasing pleasantness (appetitive activation) and unpleasantness (aversive activation) with increasing emotional arousal. In contrast, for older adults, emotional valence and arousal ratings were linearly related: Low-arousing stimuli were rated as most pleasant, and high-arousing stimuli were rated as most unpleasant. When regressed on age, these changes revealed a gradual decrease of appetitive activation (i.e., the relationship between pleasure and arousal) across adulthood and a linear increase in aversive activation (i.e., the relationship between displeasure and arousal). These results extend previous work on emotional development, adding information as to the role of emotional intensity for affective experience in different age groups. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Creating a Protective Shell for Reactive MoSi2 Particles in High‐Temperature Ceramics

Alumina encapsulated molybdenum silicide (MoSi₂) intermetallic particles were synthesized using a simple precipitation method followed by calcining at temperatures of 800°C–1000°C, to prevent the premature oxidation of MoSi₂ at high temperatures. The shell composition and the influence of the calcining temperature on microcapsule integrity were investigated by means of X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, and thermogravimetric analysis. The results demonstrate that the composition and the mechanical stability of the alumina shell can be tuned by the annealing temperature. After calcining at 800°C and 850°C the alumina shell remains intact. Calcining at higher temperature promotes the formation of mullite, which leads to cracking of the shell. However, when annealed at 1000°C for 24 h these cracks were filled with mullite and preserved the molybdenum silicide particles. Furthermore, the mechanical stability of the shell was improved by applying an intermediate calcining treatment at 450°C prior to the annealing process at 1000°C.     

Structure and Thermal Expansion of YSZ and La2Zr2O7 Above 1500°C from Neutron Diffraction on Levitated Samples

High‐temperature time‐of‐flight neutron diffraction experiments were performed on cubic yttria‐stabilized zirconia (YSZ, 10 mol% YO_1.5) and lanthanum zirconate (LZ) prepared by laser melting. Three spheroids of each composition were aerodynamically levitated and rotated in argon flow and heated with a CO₂ laser. Unit cell, positional and atomic displacement parameters were obtained by Rietveld analysis. Below ~1650°C the mean thermal expansion coefficient (TEC) for YSZ is higher than for LZ (13 ± 1 vs. 10.3 ± 0.6) × 10^?6/K. From ~1650°C to the onset of melting of LZ at ~2250°C, TEC for YSZ and LZ are similar and within (7 ± 2) × 10^?6/K. LZ retains the pyrochlore structure up to the melting temperature with Zr coordination becoming closer to perfectly octahedral. Congruently melting LZ is La deficient. The occurrence of thermal disordering of oxygen sublattice (Bredig transition) in defect fluorite structure was deduced from the rise in YSZ TEC to ~25 × 10^?6/K at 2350°C–2550°C with oxygen displacement parameters (U_iso) reaching 0.1 Å², similar to behavior observed in UO₂. Acquisition of powder‐like high‐temperature neutron diffraction data from solid‐levitated samples is feasible and possible improvements are outlined. This methodology should be applicable to a wide range of materials for high‐temperature applications.     

Do ‘green’ buildings have better indoor environments? New evidence

A post-occupancy evaluation (POE) of 12 green and 12 conventional office buildings across Canada and the northern United States was conducted. Occupants (N = 2545) completed an online questionnaire related to environmental satisfaction, job satisfaction and organizational commitment, health and well-being, environmental attitudes, and commuting. In each building on-site physical measurements at a sample of workstations (N= 974) were taken, including: thermal conditions, air quality, acoustics, lighting, workstation size, ceiling height, window access and shading, and surface finishes. Green buildings exhibited superior performance compared with similar conventional buildings. Better outcomes included: environmental satisfaction, satisfaction with thermal conditions, satisfaction with the view to the outside, aesthetic appearance, less disturbance from heating, ventilation and air-conditioning (HVAC) noise, workplace image, night-time sleep quality, mood, physical symptoms, and reduced number of airborne particulates. A variety of physical features led to improved occupant outcomes across all buildings, including: conditions associated with speech privacy, lower background noise levels, higher light levels, greater access to windows, conditions associated with thermal comfort, and fewer airborne particulates. Green building rating systems might benefit from further attention in several areas, including: credits related to acoustic performance, a greater focus on reducing airborne particulates, enhanced support for the interdisciplinary design process and development of POE protocols.

Il a été mené une évaluation après occupation (POE) de 12 immeubles de bureaux verts et 12 immeubles de bureaux classiques répartis à travers le Canada et le nord des Etats-Unis. Les occupants (N?=?2545) ont rempli un questionnaire en ligne portant sur la satisfaction environnementale, la satisfaction au travail et l'implication organisationnelle, la santé et le bien-être, les attitudes environnementales, et les trajets réguliers. Dans chaque immeuble, des mesures physiques in situ sur un échantillon de postes de travail (N?=?974) ont été effectuées, comprenant : les conditions thermiques, la qualité de l'air, l'acoustique, l'éclairage, la taille des postes de travail, la hauteur de plafond, l'accès aux fenêtres et leur occultation, et les finitions de surface. Les bâtiments verts ont affiché des performances supérieures par rapport aux bâtiments classiques similaires. De meilleurs résultats ont été obtenus concernant la satisfaction environnementale, la satisfaction à l'égard des conditions thermiques, la satisfaction à l'égard de la vue sur l'extérieur, l'aspect esthétique, la diminution des perturbations liées aux bruits provenant du chauffage, de la ventilation et de la climatisation (CVC), l'image du lieu de travail, la qualité du sommeil nocturne, l'humeur, les symptômes physiques, et la réduction du nombre de particules en suspension dans l'air. Différentes caractéristiques physiques ont conduit à une amélioration des résultats pour les occupants dans tous les immeubles, concernant notamment les conditions liées à la confidentialité des conversations, les niveaux inférieurs de bruit de fond, les niveaux de luminosité plus élevés, l'accès accru aux fenêtres, les conditions associées au confort thermique, et le nombre moindre de particules en suspension dans l'air. Les systèmes de notation des bâtiments verts pourraient bénéficier d'une plus grande attention apportée à plusieurs domaines, s'agissant en particulier des crédits relatifs aux performances acoustiques, d'un accent accru sur la réduction des particules en suspension dans l'air, d'un soutien renforcé en faveur du processus de conception interdisciplinaire et du développement de protocoles POE.

Mots clés: performances des bâtiments, bilan environnemental, bâtiments verts, environnement intérieur, Leadership in Energy and Environmental Design (LEED), satisfaction des occupants, évaluation après occupation     

Improvement of actuation performance of dielectric elastomers by barium titanate and carbon black fillers

Dielectric elastomers are promising materials for actuators resembling human muscle. Among elastomers, acrylic rubbers (ACM) have shown good actuation performance but its use is limited by the high operating voltages required. The present work demonstrates that simultaneous incorporation of nanostructured carbon black and dielectric fillers offers an increase in a dielectric permittivity and a suitable modulus of the elastomers matrix, enabling an improved electro‐mechanical actuation performance at low voltages. By the use of reinforcing carbon black and barium titanate in an acrylic elastomer matrix a sixfold increase in the dielectric permittivity was realized. A fine tuning of the actuation stress and, consequently, actuation strain can be done by a judicial selection of the different filler concentrations in the soft rubber matrix. Finally, a synergistic effect of the fillers was observed in the improved actuation performance of the developed materials. This work may pave the way to design dielectric elastomers for actuator fabrication. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44116.     

Phenol decomposition in water cathode of DC atmospheric pressure discharge in air

We studied phenol decomposition in aqueous solution under the action of DC discharge at atmospheric pressure in air. The decomposition efficiency was 0.017 molecules per 100 eV. When the kinetics of forming destruction products was studied in detail, the peculiarities of air plasma action were revealed for the first time. Plasma action not only results in the formation of oxygen-containing products, which are usually formed under oxygen plasma action (hydroxyhenols, carboxylic acids, aldehydes), but also the formation of nitro phenols. The treatment is accompanied by hydrogen peroxide formation, a pH decrease, and nitric and nitrous acids formation. We also discussed the possible mechanism of the processes and the role of some active species in chemical transformations after determining some parameters of the discharge.     

Energetics and Structure of Polymer‐Derived Si–(B–)O–C Glasses: Effect of the Boron Content and Pyrolysis Temperature

The structure and properties of polymer‐derived Si–(B–)O–C glasses have been shown to be significantly influenced by the boron content and pyrolysis temperature. This work determined the impact of these two parameters on the thermodynamic stability of these glasses. High‐temperature oxide melt solution calorimetry was performed on a series of amorphous samples, with varying boron contents (0–7.7 at.%), obtained by pyrolysis of precursors made by a sol–gel technique. Thermodynamic analysis of the calorimetric results demonstrated that at a constant pyrolysis temperature, adding boron makes the materials energetically less stable. While the B‐containing glasses pyrolyzed at 1000°C were energetically less stable than the competitive crystalline components, increasing the pyrolysis temperature to 1200°C led to their enthalpic stability. ²⁹Si and ¹¹B MAS nuclear magnetic resonance (NMR) spectroscopy measurements on selected samples confirmed a decrease in the concentrations of mixed Si‐centered SO_iC_4?i and B‐centered BO_jC_3?j bonds at the expense of formation of SiO₄ and B(OSi)₃ species (indicating a tendency toward phase separation) when the boron content and pyrolysis temperature increased. In light of the findings from calorimetry and NMR spectroscopy, we propose a structure–energetic relationship in Si–(B–)O–C glasses.     

Energetics of Silica‐Poor Glasses in the Systems MgO–SiO2 and Mg0.5Ca0.5O–SiO2

A series of alkaline‐earth silicate glasses, with compositions ranging from the metasilicate to the ortho‐ and suborthosilicate, have been synthesized by aerodynamic levitation and CO₂ laser melting. They have been studied by high‐temperature oxide melt solution calorimetry with 2PbO·B₂O₃ as solvent. The enthalpies of formation from the oxides at room temperature () have been calculated from the solution enthalpies. Glasses in the Ca_0.5Mg_0.5O–SiO₂ system show greater energetic stability than those in the MgO–SiO₂ system, with a more pronounced negative enthalpy of mixing near the orthosilicate composition. This stabilization may explain why it is possible to prepare glasses poorer in silica (suborthosilicate) in the Ca_0.5Mg_0.5O–SiO₂ system but not in the MgO–SiO₂ system. The thermodynamic observations support earlier structural studies in these systems.     

Externalizing psychopathology and marital adjustment in long-term marriages: Results from a large combined sample of married couples.

The current study evaluated the associations between externalizing psychopathology and marital adjustment in a combined sample of 1,805 married couples. We further considered the role of personality in these associations, as personality has been found to predict both the development of externalizing psychopathology as well as marital distress and instability. Diagnostic interviews assessed conduct disorder, adult symptoms of antisocial personality disorder, and alcohol dependence. Personality was assessed using the Multidimensional Personality Questionnaire. The Dyadic Adjustment Scale was used to measure marital adjustment. Results indicate that more externalizing psychopathology, greater negative emotionality, and lower communal positive emotionality were associated with reduced marital adjustment in both individuals and their spouses. Low constraint was associated with reduced marital adjustment for individuals but not for their spouses. Multivariate analyses indicated externalizing psychopathology continued to predict marital adjustment even when accounting for overlap with personality. These results highlight the importance of examining the presence of externalizing psychopathology and the personality attributes of both members of a dyad when considering psychological predictors of marital adjustment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)