Mechanical properties of short fiber reinforced thermoplastic blends

An immiscible thermoplastic component was added to a conventional short fiber reinforced polymer to study its effect on the mechanical properties of the composite. Because of the preferential wetting of the fiber reinforcement a continuous network was formed of fibers ‘welded’ together by the minor component within the matrix polymer.Polyethylene (PE) was used as the matrix, polyamide-6 (PA6) as dispersed polymer phase and glass fibers (GF) as reinforcement. The obtained composite retained unusually high values of the elasticity modulus at temperatures above the melting point of the matrix. The upper limit of the ‘applicability’ of the material is determined by the melting point of the minor component. A simple model was derived to describe the mechanical properties of the composite. The model shows a good agreement with the experimental data. The influence of the model parameters on the predictions of the model was examined.     

Plasma Lipoproteins and Triacylglycerol are Predictors of Small,Dense LDL Particles

Recently published data suggest that the assessment of LDL subfraction profiles may contribute to the determination of the cardiovascular risk. In this study, we tested the ability of various metabolic parameters to estimate the presence or the preponderance of small, dense LDL particles (sdLDL). One hundred and fifty individuals attending the Outpatient Clinics of the University Hospital of Ioannina for suspected metabolic abnormalities were included in the study. Individuals were excluded if they were found to be diabetic or if they had a history of cardiovascular disease. Patients with thyroid dysfunction, liver or kidney diseases as well as those receiving drugs that may interfere with lipids or glucose metabolism were also excluded from the study. The ability of the various parameters to identify individuals with pattern B LDL phenotype or, alternatively, with measurable quantities of sdLDL particles was tested with the calculation of the areas under the ROC curves. The ratio of triglycerides to HDL-C was the best predictor of the presence of the pattern B LDL phenotype. Nevertheless, when the variable of interest was the presence of measurable quantities of sdLDL subfractions, the ratio of apoB to apoAI had the best predictive ability. In conclusion the ratios of apoB to apoAI and of triglycerides to HDL-C can reliably predict the presence of measurable quantities of sdLDL particles and of the pattern B LDL phenotype, respectively. However, since the quantitative determination of sdLDL concentrations may contribute to the determination of the cardiovascular risk, whereas the role of the LDL particle size remains controversial, apoB to apoAI ratio could provide more valuable information compared to markers that simply predict the presence of the pattern B LDL phenotype.     

Mechanical and fracture properties of ternary PE/PA6/GF composites

This article studies the mechanical properties of short fiber reinforced polymer blends comprised of a soft thermoplastic matrix (polyethylene, PE), a rigid dispersed thermoplastic phase (polyamide-6, PA6) and glass fiber reinforcement. These ternary composites are designed as a model system to investigate the impact of the mutual interactions of the three phases on the composite mechanical properties. For this purpose two types of fibers are used, dispersed-phase and matrix-phase compatible fibers, respectively.     

Mechanical behavior of glass/epoxy tubes under combined static loading. Part I: Experimental

A series of biaxial static tests of E-glass/epoxy tubular specimens [±45]₂, subjected to combined torsion and tension/compression were performed to simulate complex stress states encountered in a wind turbine rotor blade. The failure locus in the effective axial-shear stress plane was derived experimentally while in-plane strain tensor components were measured in the tube outer surface. By means of shell theory and strain measurements in the surface of the specimen, the in-plane shear response of the outer ply was obtained, revealing dependence each time to the combined tube loading. The correlation established between the ratio of transverse normal and in-plane shear stress in the principal coordinate ply system and the elastic shear modulus, suggested a strong dependence, warning on the implications for design and certification procedures.     

Retracted and replaced: Enabling technologies for the ‘always best connected’ concept

This article has been retracted and replaced. Retraction notice DOI: 10.1002/wcm.426 ‘Always Best Connected’ (ABC) is considered one of the main requirements for next generation networks. The ABC concept allows a person to have access to applications using the devices and network technologies that best suits his or her needs or profile at any time. Clearly, this requires the combination of a set of existing and new technologies, at all levels of the protocol stack, into one integrated system. In this paper, a considerable set of the technologies, that are expected to play a key role towards the ABC vision, are presented. Starting from a reference architecture, the paper describes the required enhancements at certain levels of a traditional protocol stack, as well as technologies for mobility and end‐to‐end Quality of Service (QoS) support. The paper concludes with a case study that reveals the advantages of the ABC concept. Copyright © 2004 John Wiley & Sons, Ltd.     

Thermoeconomic modeling and parametric study of hybrid SOFC–gas turbine–steam turbine power plants ranging from 1.5 to 10 MWe

Detailed thermodynamic, kinetic, geometric, and cost models are developed, implemented, and validated for the synthesis/design and operational analysis of hybrid SOFC–gas turbine–steam turbine systems ranging in size from 1.5 to 10 MWe. The fuel cell model used in this research work is based on a tubular Siemens-Westinghouse-type SOFC, which is integrated with a gas turbine and a heat recovery steam generator (HRSG) integrated in turn with a steam turbine cycle. The current work considers the possible benefits of using the exhaust gases in a HRSG in order to produce steam which drives a steam turbine for additional power output. Four different steam turbine cycles are considered in this research work: a single-pressure, a dual-pressure, a triple pressure, and a triple pressure with reheat. The models have been developed to function both at design (full load) and off-design (partial load) conditions. In addition, different solid oxide fuel cell sizes are examined to assure a proper selection of SOFC size based on efficiency or cost. The thermoeconomic analysis includes cost functions developed specifically for the different system and component sizes (capacities) analyzed. A parametric study is used to determine the most viable system/component syntheses/designs based on maximizing total system efficiency or minimizing total system life cycle cost.     

Subcellular trace element distribution in Geosiphon pyriforme

Geosiphon pyriforme is a unique endosymbiotic consortium consisting of a soil dwelling fungus and the cyanobacterium Nostoc punctiforme. At present this symbiosis becomes very interesting because of its phylogenetic relationship to the arbuscular mycorrhizal (AM) fungi. Geosiphon pyriforme could be an important model system for these obligate symbiotic fungi, which supply 80–90% of all land plant species with nutrients, in particular phosphorous and trace elements. Combined PIXE and STIM analyses of the various compartments of Geosiphon give hints for the matter exchange between the symbiotic partners and their environment and the kind of nutrient storage and acquisition, in particular related to nitrogen fixation and metabolism. To determine the quality of our PIXE results we analysed several geological and biological standards over a time period of three years. This led to an overall precision of about 6% and an accuracy of 5–10% for nearly all detectable elements. In combination with the correction model for the occurring mass loss during the analyses this holds true even for biological targets.     

A break-glass protocol based on ciphertext-policy attribute-based encryption to access medical records in the cloud

Annals of Telecommunications - In emergency care, fast and efficient treatment is vital. The availability of Electronic Medical Records (EMR) allows healthcare professionals to access a...     

Security Threat Analysis of the 5G ESSENCE Platform

Wireless Personal Communications - The present paper discusses several security requirements coming from assessment of the use cases developed within the context of the original 5G-PPP “5G...