Study of the luminescent properties of KMgF3:Sm

The photoluminescence (PL), radioluminescence (RL) and thermoluminescence (TL) of KMgF₃ doped at several Sm concentrations have been investigated. The maximum TL and RL yield under beta irradiation has been observed in KMgF₃:Sm 0.02 mol%. The glow curve of this doped perovskite is made up of at least five peaks located at 95, 120, 160, 270, and 330 °C. The third peak appears to be the most convenient for personal or environmental dosimetry, since it shows no fading and good linearity within the investigated dose range (0.020-200 Gy). From the RL and PL spectra it has been found that most of KMgF₃:Sm emission is located at wavelengths higher than 650 nm. This emission, which is characteristic of Sm²⁺, makes this doped compound attractive for fiber-optic dosimetry.     

Estimation of rheological properties of gelato by FT-NIR spectroscopy

The control of gelato powder mixture production usually is carried out evaluating the gelato liquid phase. The rheological measurements from the present study were conduced on gelato unfrozen liquid phase in order to indirectly evaluate its rheological properties by FT-NIR spectroscopy applied on gelato powders. The calibration set was composed by samples obtained from different recipes having increasing percentage of thickeners, maintaining the proportions of the others compounds constant. After the NIR acquisitions the powders were mixed with warm milk, blended and than settled in order to obtain the unfrozen liquid phase needed for the rheological measurements. For each of the 60 tested recipes three batches with the same thickeners concentration were prepared. The flow curves were obtained with a rotational viscosimeter and were evaluated by using the Ostwald de Waele’s equation and the goodness of fit was evaluated by the R², which was above 0.95. Predictive models of rheological parameters were set up by means of PLS regressions in order to predict the apparent viscosity (η), the consistency coefficient (K) and the flow behaviour index (n) from spectral acquisitions. A high correlation of calibration was found between NIR spectra and apparent viscosity with R² of 0.943. A good correlation was also found between the NIR spectra and the consistency coefficient (K) and flow behaviour index (n), with a determination coefficient (R²) of 0.895 and 0.874, respectively.The good prediction of the models encourages applying them to reduce significantly the time of the powder mixing control during production.     

An optical study of alumina films thermal evolution upon ammonia annealing

The physical and structural evolution of alumina films deposited by ALCVD annealed at high temperatures in N₂ has been studied.Low temperature post deposition treatments in NH₃ (PDN) have been performed to evaluate the impact of nitrogen incorporation in the alumina film on its thermal stability. Thermal evolution has been studied by deep UV spectroscopic ellipsometry and grazing X-ray reflectance techniques. AFM measurements were also performed to confirm and complete the ellipsometric and GXR analysis.The change of the crystalline structure was detected by ellipsometry by the different UV refractive index, while the GXR provided a unique thickness evaluation.It was therefore possible to determine the layer densification after the thermal treatment and the impact of the PDN on the transition temperature.     

Photocatalytic oxidation of aliphatic and aromatic sulfides in the presence of silica adsorbed or zeolite-encapsulated 2,4,6-triphenyl(thia)pyrylium

Solid photocatalysts in which the 2,4,6-triphenylpyrylium (TP) or 2,4,6-triphenylthiapyrylium cation (TTP) are encapsulated within zeolite Y or deposited on mesoporous silica are used as photosensitizers for the oxidation of sulfides, both aromatic and aliphatic, in solvents of various polarity. Contrary to the same cations in solution, these solid sensitizers are not significantly degraded during operation. An effective oxygenation takes place leading to sulfoxides, disulfides, sulfinic and sulfenic esters as well as sulfonic acids. This large scope method shows a limited dependence on the substrate structure and on conditions and is suitable for the abatement of sulfur-containing pollutants.     

Analgesic,Anxiolytic and Anaesthetic Effects of Melatonin: New Potential Uses in Pediatrics

Exogenous melatonin is used in a number of situations, first and foremost in the treatment of sleep disorders and jet leg. However, the hypnotic, antinociceptive, and anticonvulsant properties of melatonin endow this neurohormone with the profile of a drug that modulates effects of anesthetic agents, supporting its potential use at different stages during anesthetic procedures, in both adults and children. In light of these properties, melatonin has been administered to children undergoing diagnostic procedures requiring sedation or general anesthesia, such as magnetic resonance imaging, auditory brainstem response tests and electroencephalogram. Controversial data support the use of melatonin as anxiolytic and antinociceptive agents in pediatric patients undergoing surgery. The aim of this review was to evaluate available evidence relating to efficacy and safety of melatonin as an analgesic and as a sedative agent in children. Melatonin and its analogs may have a role in antinociceptive therapies and as an alternative to midazolam in premedication of adults and children, although its effectiveness is still controversial and available data are clearly incomplete.     

From the ganglioside GQ1balpha to glycomimetic antagonists of the myelin-associated glycoprotein (MAG)

The tetrasaccharide 4, a substructure of ganglioside GQ1balpha, shows a remarkable affinity for the myelin-associated glycoprotein (MAG) and was therefore selected as starting point for a lead optimization program. In our search for structurally simplified and pharmacokinetically improved mimics of 4, antagonists with modifications of the core disaccharide Galbeta(1-3)GalNAc, as well as the terminal alpha(2-3)- and the internal alpha(2-6)-linked neuraminic acid were synthesized and tested in target-based binding assays. Compared to the reference tetrasaccharide 4, the most potent antagonist 17 exhibits a 360-fold improved affinity. Furthermore, pharmacokinetic parameters such as stability in the cerebrospinal fluid, logD and permeation through the BBB indicate the drug-like properties of antagonist 17.     

Rapid FTIR determination of water,phenolics and antioxidant activity of olive oil

A rapid Fourier transformed infrared (FTIR) attenuated total reflectance (ATR) spectroscopic method was applied to the determination of water content (WC), total phenol amount (TP) and antioxidant activity (ABTS ^{. +}) of virgin olive oils (VOO) and olive oils. Calibration models were constructed using partial least squares regression. Oil samples with WC ranging from 289 to 1402 mg water/kg oil, with TP from 46 to 877 mg gallic acid/kg oil and with ABTS ^{. +} from 0 to 5.7 mmol Trolox/kg oil were considered for chemometric analysis. Better results were obtained when selecting suitable spectral ranges; in particular, from 2260 to 1008 cm^?1 for WC, from 3610 to 816 cm^?1 for TP and from 3707 to 1105 cm^?1 for ABTS ^{. +}. Satisfactory LOD values by the FTIR‐chemometric methods were achieved: 9.4 (mg/kg oil) for WC; 12.5 (mg gallic acid/kg oil) for TP, and 0.76 (mmol Trolox/kg oil) for ABTS ^{. +}. The evaluation of the applicability of these analytical approaches was tested by use of validation sample sets (n = 16 for WC, n = 11 for TP and n = 14 for ABTS) with nearly quantitative recovery rates (99–114%). The FTIR–ATR method provided results that were comparable to conventional procedures. Practical applications : The presented method is based on ATR–FTIR in combination with multivariate calibration methodologies and permits a simultaneous evaluation of important quality parameters of VOO (WC, TP and ABTS ^{. +}). This approach represents an easy and convenient means for monitoring olive oil quality with the advantage of ease of operation, speed, no sample pretreatment and no consumption of solvents. The data obtained with this method are comparable to those obtained using the official reference method. Therefore, the technique is highly plausible as an alternative to the standard procedure for routine analysis or control at‐line of production processes.     

Distribution of T-2 and HT-2 toxins in milling fractions of durum wheat

The effect of processing on mycotoxin content in milling fractions has been investigated in 10 samples of durum wheat contaminated with T-2 and HT-2 toxins at levels ranging from 97 to 5,954 μg/kg (sum of T-2 and HT-2 toxins). Either naturally contaminated samples or samples artificially inoculated with Fusarium sporotrichioides under field conditions were used. A method based on liquid chromatography-tandem mass spectrometry coupled with immunoaffinity column cleanup was validated in-house for the simultaneous analysis of both toxins in a variety of matrices, including uncleaned wheat, cleaned wheat, screenings, bran, red dog, fine middlings, and semolina. Mean recoveries from samples spiked with T-2 and HT-2 toxins at levels of 100 μg/kg ranged from 85 to 107%, with relative standard deviations (RSDs) lower than 14%. The milling process led to an increase of T-2 and HT-2 toxin contents up to 13- and 5-fold in screenings and bran, respectively, compared with occurrence in the uncleaned wheat; however, an overall reduction of T-2 and HT-2 toxins by 54% (RSD, 20%) and 89% (RSD, 3%) was observed in cleaned wheat and in semolina, respectively.     

Thermodynamic Evaluation of the Phase Stability and Microstructural Characterization of a Cast B1914 Superalloy

The boron-carbon superalloys (BC alloys) were developed to reduce the carbon content of the alloys to less than 0.02 wt.% and increase the boron content to 0.1 wt.% in some Ni-based superalloys. In this study, we have used characterization techniques, such as DTA, XRD, SEM coupling, and thermodynamic calculation using Thermo-Calc software, to obtain information about the phase transformation reaction temperatures and the elemental compositions of the microstructural constituents encountered in the B1914 superalloy. The microstructure of the B1914 superalloy was composed of a gamma (γ) phase with a dendritic structure and gamma prime (γ′) phase with a cuboidal shape. Precipitates of γ′ and a lamellar eutectic, composed of γ/(Mo,Cr,Ni)₃B₂, were identified in the interdendritic region. The thermodynamic calculation results have shown to be a valuable tool for predicting the transformation temperature, such as liquidus, γ’ solvus, and incipient melting point. These transformations are important parameters used in casting simulation software for determining the heat treatment and welding repair conditions for parts made from this alloy.     

Corrosion behavior of Eurofer 97 and ODS-Eurofer alloys compared to traditional stainless steels

In the present work, the corrosion resistance of ferritic-martensitic EUROFER 97 and ODS-EUROFER steels was tested in solutions containing NaCl or H₂SO₄ and KSCN, both at 25 °C. The results were compared to those of AISI 430 ferritic and AISI 410 martensitic conventional stainless steels. The as-received samples were tested by electrochemical techniques, specifically, electrochemical impedance spectroscopy, potentiodynamic polarization curves, and double-loop electrochemical potentiokinetic reactivation tests. The surfaces were observed by scanning electron microscopy after exposure to corrosive media. The results showed that EUROFER 97 and ODS-EUROFER alloys present similar corrosion resistance but lower than ferritic AISI 430 and martensitic 410 stainless steels.