Molecular Heterojunctions of Oligo(phenylene ethynylene)s with Linear to Cruciform Framework

Electrical transport properties of molecular junctions are fundamentally affected by the energy alignment between molecular frontier orbitals (highest occupied molecular orbital (HOMO) or lowest unoccupied molecular orbital (LUMO)) and Fermi level (or work function) of electrode metals. Dithiafulvene (DTF) is used as substituent group to the oligo(phenylene ethynylene) (OPE) molecular wires and different molecular structures based on OPE3 backbone (with linear to cruciform framework) are achieved, with viable molecular orbitals and HOMO–LUMO energy gaps. OPE3, OPE3–DTF, and OPE3–tetrathiafulvalene (TTF) can form good self‐assembled monolayers (SAMs) on Au substrates. Molecular heterojunctions based on these SAMs are investigated using conducting probe–atomic force microscopy with different tips (Ag, Au, and Pt) and Fermi levels. The calibrated conductance values follow the sequence OPE3–TTF > OPE3–DTF > OPE3 irrespective of the tip metal. Rectification properties (or diode behavior) are observed in case of the Ag tip for which the work function is furthest from the HOMO levels of the OPE3s. Quantum chemical calculations of the transmission qualitatively agree with the experimental data and reproduce the substituent effect of DTF. Zero‐bias conductance, and symmetric or asymmetric couplings to the electrodes are investigated. The results indicate that improved fidelity of molecular transport measurements may be achieved by systematic studies of homologues series of molecular wires applying several different metal electrodes.     

A primer on the building economics of climate change

Climate change will entail new conditions for the construction industry. Knowledge about the implications of climate change on the built environment will be of the utmost importance to the industry in years to come. A building is a ‘long lasting’ durable asset that is changed over time due to exogenously imposed strains and by actions. The built environment has an expected lifetime varying from 60 to more than 100 years. Hence, the building economics of climate change should be treated within a dynamic analytical framework that explicitly allows for changes in the information sets over time. The building stock of the future consists of the building stock of today and of new construction. In the future, parts of the present building stock will be adapted to changes in the environment, while some parts will be kept as they are. Analysis of how building stock is affected by future climate change should handle this diversity. This can be done through the use of a putty-clay model. Uncertainty of what kind of climate regimes will prevail in the future enhances the profitability of actions that increase future flexibility. Hence, the real option approach to building economics is utilized.     

Engineering model for intumescent coating behavior in a pilot‐scale gas‐fired furnace

In the event of a fire, intumescent fire protective coatings expand and form a thermally insulating char that protects the underlying substrate from heat and subsequent structural failure. The intumescence includes several rate phenomena, which have been investigated and quantified in the literature for several decades. However, various challenges still exist. The most important one concerns mathematical model validation under realistic exposure conditions and/or time scales. Another is the simplification of advanced models to overcome the often‐seen lack of a complete set of input and adjustable model parameters for a given coating, thereby providing models for industrial applications. In this work, these two challenges are addressed. Three experimental series, with an intumescent coating inside a 0.65 m³ gas‐fired furnace, heating up according to so‐called cellulosic fire conditions, were conducted and a very good repeatability was evident. The experiments were run for almost 3 h, reaching a final gas temperature of about 1100°C. Measurements include transient temperature developments inside the expanding char, at the steel substrate, and in the mineral wool insulation placed behind the substrate. A mathematical model, describing the intumescent coating behavior and temperatures in the furnace using a single overall reaction was developed and validated against experimental data. By including a decomposition front movement through the char, a good qualitative agreement was obtained. After further validation against experiments with other coating formulations, it has potential to become a practical engineering tool. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3947–3962, 2016     

Importance of a Conserved Lys/Arg Residue for Ligand/PDZ Domain Interactions as Examined by Protein Semisynthesis

PDZ domains are ubiquitous small protein domains that are mediators of numerous protein–protein interactions, and play a pivotal role in protein trafficking, synaptic transmission, and the assembly of signaling‐transduction complexes. In recent years, PDZ domains have emerged as novel and exciting drug targets for diseases (in the brain in particular), so understanding the molecular details of PDZ domain interactions is of fundamental importance. PDZ domains bind to a protein partner at either a C‐terminal peptide or internal peptide motifs. Here, we examined the importance of a conserved Lys/Arg residue in the ligand‐binding site of the second PDZ domain of PSD‐95, by employing a semisynthetic approach. We generated six semisynthetic PDZ domains comprising different proteogenic and nonproteogenic amino acids representing subtle changes of the conserved Lys/Arg residue. These were tested with four peptide interaction partners, representing the two different binding modes. The results highlight the role of a positively charged amino acid in the β1–β2 loop of PDZ domains, and show subtle differences for canonical and noncanonical interaction partners, thus providing additional insight into the mechanism of PDZ/ligand interaction.     

Surface technology should improve PEM fuel cell performance

Leading industrial nations are investing in hydrogen technology as energy storage solution with fuel cells as the main converter to electric energy. Improvements in the performance of the key components: electrode catalyst, bipolar plates and polymer electrolyte membrane are needed to reduce costs for mass-market introduction. Consequently, surface technology has an essential role in meeting the goals.     

Microparticles based on hydrophobically modified chitosan as drug carriers

In this work, a hydrophobically modified (HM) chitosan derivative was prepared by covalent linkage of C₁₂ groups to the chitosan backbone. HM‐chitosan microparticles were prepared according to an emulsification‐solvent evaporation method and naltrexone (NTX) was used as a model drug. For comparison, unmodified chitosan and poly lactic‐co‐glycolic acid (PLGA) microparticles were also tested as carriers for NTX. HM‐chitosan formed viscous semi‐dilute solutions, suggesting a high level of chain entanglements and hydrophobic associations. HM‐chitosan microparticles generally showed higher production yield and encapsulation efficiency, as compared with chitosan and PLGA. The burst release shown by chitosan microparticles was significantly reduced when using the HM‐chitosan derivative. An enhanced control of drug release was observed over at least 50 days. PLGA particles demonstrated inferior controlled release properties as compared to HM‐chitosan subsequent to the initial release stage. These results revealed the potential of hydrophobic modification of chitosan as a means to improve the stability and sustained delivery properties of the polymer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40055.     

The effect of microencapsulated phase change materials on the rheology of geopolymer and Portland cement mortars

The effect of microencapsulated phase-change materials (MPCM) on the rheological properties of pre-set geopolymer and Portland cement mortars was examined. Microcapsules with hydrophilic and hydrophobic shells were compared. The shear rate dependency of the viscosities fitted well to a double Carreau model. The zero shear viscosities are higher for geopolymer mortar, illustrating poorer workability. The time evolution of the viscosities was explored at shear rates of 1 and 10 s⁻¹. New empirical equations were developed to quantify the time-dependent viscosity changes. The highest shear rate disrupted the buildup of the mortar structures much more than the lower shear rate. Microcapsules with a hydrophobic shell affect the rheological properties much less than the microcapsules with a hydrophilic shell, due to the higher water adsorption onto the hydrophilic microcapsules. Shear forces was found to break down the initial structures within geopolymer mortars more easily than for Portland cement mortars, while the geopolymer reaction products are able to withstand shear forces better than Portland cement hydration products. Initially, the viscosity of geopolymer mortars increases relatively slowly during due to formation of geopolymer precursors; at longer times, there is a steeper viscosity rise caused by the development of a 3D-geopolymer network. Disruption of agglomerates causes the viscosities of portland cement mortars to decrease during the first few minutes, after which the hydration process (increasing viscosities) competes with shear-induced disruption of the structures (decreasing viscosities), resulting in a complex viscosity behavior.     

Indentation cracking and deformation mechanism of sodium aluminoborosilicate glasses

Developing less brittle oxide glasses is a grand challenge in the field of glass science and technology, as it would pave the way toward new glass applications and limit the overall raw material usage and energy consumption. However, in order to achieve this goal, more insight into the correlation between the chemical composition and material properties is required. In this work, we focus on the mechanical properties of quaternary sodium aluminoborosilicate glasses, wherein systematic changes in glass chemistry yield different resistances to indentation crack initiation. We discuss the origin of the composition dependence of indentation cracking based on an evaluation of the deformation mechanism taking place during the indentation event. To this end, we use a simple metric, the extent of indent side length recovery upon annealing, to quantify the extent of reversible volume deformation. Finally, we also compare the compositional trend in crack initiation resistance to that in crack growth resistance (fracture toughness), showing no simple correlation among the two.     

Prevalence and diversity of Campylobacter jejuni in pig herds on farms with and without cattle or poultry

The prevalence and diversity of Campylobacter jejuni was investigated in pig herds on farms with and without cattle or poultry production. A bacteriological screening of pig cecal samples from 247 finisher herds was carried out at the slaughter-house. Subsequently, a follow-up study was conducted in 24 herds (either with or without prior C. jejuni isolation from pigs) in which fecal samples were collected from pigs and, if present, cattle and poultry. Samples were analyzed for presence of Campylobacter, and subsequent analysis included species identification, serotyping, and, for selected strains, pulsed-field gel electrophoresis typing. In the slaughterhouse screening, C. jejuni was isolated from pigs in 21 (8.5%) herds, but no significant difference in prevalence was found between herd types (pigs, pigs and cattle, pigs and poultry). At the slaughterhouse, C. jejuni and Campylobacter coli prevalence in pigs was 2.3 and 90.1%, respectively. In the follow-up study, herd prevalence of C. jejuni was 8.3%, whereas C. jejuni and C. coli were isolated from 0.8 and 92.0% of pigs, respectively. In mixed production herds, C. jejuni predominated in cattle (42.7%) and poultry (31.6%), whereas C. jejuni was only isolated from 1.3 to 2.5% of pigs in these herds. There were no significant differences in C. jejuni or C. coli prevalence in pigs, cattle, and poultry between herds with and without prior C. jejuni isolation at the slaughterhouse. Pulsed-field gel electrophoresis typing did not yield evidence of C. jejuni transmission between cattle or poultry and pigs in mixed production herds. In contrast, pulsed-field gel electrophoresis analysis showed indistinguishable serotypes of C. coli in pigs and cattle in two herds. Verification of C. jejuni-positive pig samples showed that individual pigs can excrete high levels of C. jejuni and that mixed infection with C. jejuni and C. coli was common in C. jejuni-positive pigs. The results of our study suggest that transmission of C. jejuni between pigs and cattle or poultry in mixed production herds occurs infrequently. Detection of indistinguishable C. coli isolates in two herds, however, might indicate the existence of low-level transmission between pigs and cattle in herds of mixed production.     

Cooling causes changes in the distribution of lipoprotein lipase and milk fat globule membrane proteins between the skim milk and cream phase

Lipoprotein lipase (LPL) activity and free fatty acid levels were studied in freshly milked, uncooled milk from individual Danish Holstein or Jersey cows, or after storage for up to 24 h at either a cooling temperature (4°C) or at the milking temperature (31°C). Upon cooling for up to 24 h, LPL activity increased in the cream phase, whereas the activity in the skim milk was steady, as observed for Jersey cows, or increased, as seen for the Holsteins. Storage at 31°C decreased the LPL activity in both the cream phase and the skim milk phase. The increase in free fatty acid levels was found to depend on LPL activity, incubation temperature, substrate availability, and incubation time. Furthermore, the migration of milk proteins between the skim milk phase and the cream phase upon cooling of milk from Jersey cows or from Danish Holstein cows was studied using proteomic methods involving 2-dimensional gel electrophoresis and mass spectrometry. Proteins associated with the milk fat globules were isolated from all milk fractions and analyzed. Major changes in the distributions of proteins between the skim milk phase and the cream phase were observed after cooling at 4°C for 4 h, where a total of 29 proteins between the 2 breeds was found to change their association with the milk fat globule membrane (MFGM) significantly. Among these, the MFGM proteins adipophilin, fatty acid-binding protein, and lactadherin, as well as the non-MFGM proteins β-casein, lactoferrin, and heat shock protein-71, were identified. Adipophilin, lactadherin, and lactoferrin were quantitatively more associated with the MFGM upon cold storage at 4°C, whereas β-casein, fatty acid-binding protein, and heat shock protein-71 were found to be less associated with the MFGM upon cold storage.