Chemical Profile and Biological Activities of Two Edible Plants: Chemical Investigation and Quantitative Analysis Using Liquid Chromatography Tandem Mass Spectrometry and Gas Chromatography Mass Spectrometry

The objectives of this study were to define the phenolic and fatty acid profiles, anticholinesterase, antioxidant, antimicrobial activities, and total phenolic-flavonoid contents of Lycopsis orientalis and Tragopogon latifolius var. angustifolius which have been used as food source and food supplement in Anatolia and have never been examined before. Rosmarinic and quinic acids (21.11 and 11.46 mg g^–1 extract, respectively) were found to be the most abundant constituents in L. orientalis and T. latifolius var. angustifolius among the studied 27 compounds by liquid chromatography tandem mass spectrometry. In the fatty acid compositions of L. orientalis and T. latifolius var. angustifolius that were determined by gas chromatography mass spectrometry, oleic (29.1%) and palmitic (28.7%) acids were identified as the major components, respectively. The high antioxidant activity of the methanol extract of L. orientalis shows parallelism to its rosmarinic acid content. Besides, this extract showed medium anticholinesterase activity. The results of the present study proves that the L. orientalis might also be used as a food source due to its high phenolic acid content and strong antioxidant property.     

Relative brittleness characterization of some selected granitic building stones: Influence of mineral grain size

Being crystalline materials, brittleness may be an important issue for granitic rocks, especially when they are subject to certain loading conditions. Therefore, in practice, more specifically in their usage as a natural building stone, there is a need for their brittleness characterization. This paper reports a study carried out on some selected granitic rock types in order to determine their relative brittleness index values and relate it to their mineral grain size. For this purpose, three different types of granitic rocks similar in mineral composition, but diverse in grain sizes were selected for the execution of the study. The relative brittleness index values of the studied rock types were determined from the size effect method by using the point load test apparatus. Based on the results of this investigation it is was concluded that, rather than the proportions of the rock forming minerals such as quartz and feldspars, the grain size of feldspars could be the dominant parameter affecting relative brittleness values of the tested rocks.     

Effect of single and multi-channel electrodes application on EDM fast hole drilling performance

In diesel engines, it is inevitable that the torsional vibration is produced by the fluctuation of engine torque. Therefore, it is necessary to establish preventive measures to diminish the torsional vibration. A sleeve spring damper is one such measure to reduce the torsional vibration. In this study, the closed form equations to predict the spring constant of a sleeve spring and the dynamic characteristics of the torsional vibration damper are proposed to calculate stiffness of the damper, and verified their availability through the finite element analysis. Our theoretical values are in good agreement with results obtained from finite element analysis and experiments. Results obtained from the derived equation enable designers to be more efficient.     

Proximate composition and fatty acid profile of three different fresh and dried commercial sea cucumbers from Turkey

Proximate composition and fatty acid (FA) profile of three commercial sea cucumbers; Holothuria tubulosa, Holothuria polii and Holothuria mammata caught from Aegean Sea of Turkey were analysed. The effects of regional variation and drying process on FA composition were also investigated. Moisture, protein, fat and ash contents of the species ranged between 81.24% and 85.24%, 7.88% and 8.82%, 0.09% and 0.18%, and 5.13% and 7.85%, respectively, with a significant changes among species (P < 0.05) with some exceptions. Although FA values varied significantly (P < 0.05) among species and regions, the changes for most FA types representing the same region for different species were not significantly different. Total polyunsaturated fatty acids (PUFA) were found to be higher than total saturated (SFA) and monosaturated FAs (MUFA) accounting for 53.0–62.12% for ∑PUFA, 13.28–16.41% for ∑MUFA and 13.99–19.21% for ∑SFA. While some individual SFAs and PUFAs decreased after drying process, various individual FAs of MUFA increased in their amounts (P < 0.05). Among PUFAs, the highest mean value of eicosapentaenoic acid and docosahexaenoic acid for all regions were determined for H. polii as 7.25% and H. tubulosa as 12.37% in fresh samples, respectively. This study represents new information relating to FA contents and drying effect on FA profile for these species.     

Effect of curing under pressure on compressive strength development of cemented paste backfill

The mechanical performance of cemented paste backfill (CPB) placed in underground openings (e.g., mine stopes) often differs from laboratory-predicted performance, even under the same atmospheric curing conditions (ambient temperature and relative humidity). This is probably due to the specific self-weight consolidation, different drainage conditions and confinement pressures encountered in the paste backfilled stopes. A new test system named CUAPS (Curing Under Applied Pressure System) was designed at the Université du Québec en Abitibi-Témiscamingue (UQAT) to assess the hydro-mechanical performance of in situ CPB samples at laboratory scale. The CUAPS apparatus allows the effective curing of CPB samples subjected to an assortment of vertical pressure applications (curing under stresses) that can mimic in situ placement and consolidation conditions. The compressive strength development of CPB samples prepared from sulphide-rich mine tailings from Garpenberg polymetallic mine (Sweden) was investigated using CUAPS apparatus and conventional plastic moulds (unconsolidated undrained samples) in parallel. The effect of curing stress (i.e. simulating different consolidation conditions) on resultant geotechnical index parameters and hydromechanical properties of CPB samples was analyzed. The primary observation is the confirmation that the compressive strength development of the consolidated CPB samples is higher than that of unconsolidated undrained ones. It could be attributed to the removal of excess pore water mainly due to the applied pressure during the effective curing process, which seems to improve consolidation process of the CPB material. The results also account for the differences in the CPB strength observed between laboratory samples and in situ samples. Thus, CUAPS would be more suitable than conventional plastic moulds to collect data for preliminary and final design of CPB systems.     

Air and oxy-fuel combustion kinetics of low rank lignites

The air and oxy-fuel combustion processes of two low-grade lignite coals were investigated by thermogravimetric analysis (TGA) method. Coals were provided from two different coal mines in the Aegean region of Turkey. Oxy-fuel combustion experiments were carried out with three different gas mixtures of 21% O₂–79% CO₂; 40% O₂–60% CO₂ and 50% O₂–50% CO₂ at 950 °C and heating rates of 10 °C/min, 20 °C/min and 40 °C/min. The kinetics of the oxy-fuel combustion of coals were studied by using four different methods namely, Coats-Redfern (model-fitting method), Friedman (FR), Flynn–Wall–Ozawa's (FWO) and Kissinger–Akahira–Sunose's (KAS) methods. The apparent activation energies of combustion process calculated by FWO method are slightly but systematically higher than that calculated by the KAS and FR methods for the oxy-fuel atmospheres. Combustion behavior of both coals in the oxy-fuel combustion environment could vary significantly, likely due to their characteristics such ash and volatile matter contents.     

Hemocompatibility,cytotoxicity, and genotoxicity of poly(methylmethacrylate)/nanohydroxyapatite nanocomposites synthesized by melt blending method

The aim of this study was to show the hemocompatibility, cytotoxicity, and genotoxicity of nanocomposites that were synthesized with different molecular weights of poly(methyl methacrylate) (PMMA) and different concentrations of nanohydroxyapatite (nHAp). Different techniques to characterize the nanocomposites were used. The cytotoxicity and genotoxic effects of the polymers and nanocomposites on human lymphocytes were determined by acid phosphatase assay, viability test, and comet assay. Moreover, hemocompatibility test was performed. It was found that all of the PMMA/nHAp nanocomposites are highly hemocompatible and biocompatible, none of the nanocomposites showed a cytotoxic effect, and nHAp addition decreased the genotoxicity.     

Recent advances in insulated gate bipolar transistor technology

Device design of the insulated gate bipolar transistor (IGBT) has been optimized to reduce the distributed transmission-line effect. In addition, cell geometry is chosen to yield high latchup current capability and low forward-voltage drop simultaneously. The vertical structure is optimized to enhance both the turn-off speed and the safe operating area of the IGBTs. The turn-off time of the n-IGBT has been shortened to be as low as 40 ns. The p-channel IGBT latchup current has been improved four to six times over the previously reported results through innovative design and processes. An open-base bipolar transistor model has been implemented to investigate transient IGBT characteristics